3M Cable Tie bases will offer light holding power on most powder coated surfaces. For heavier loads, we would recommend the screw mount option.
If you are looking for more details, kindly visit Hebei Top Tape.
* However, the end user must determine if the product is suitable for their intended application.
At what temperature – above the temperature listed on the data sheet − would the Scotch® Linerless Rubber Splicing Tape 130C fail?
Since we do not test tapes at temperatures above those listed in the test standards, we do not have any data to answer this question.
Download Data Sheet
Scotch® Linerless Rubber Splicing Tape 130C
Download brochure:
Rubber, Mastic and Specialty Tapes Application Guide (PDF, 3.98 MB)
Is Scotch® Linerless Rubber Splicing Tape 130C flame retardant?
It is not. Scotch® Linerless Rubber splicing tape 130C is heat resistant and can withstand temperatures up to 194°F (90°C) with emergency overload up to 266°F (130°C) but it is not flame retardant. Flame retardance are specific standards set by UL and ASTM and is normally defined the conditions needed to support combustion of a particular material.
If you are looking for more details, kindly visit Low Voltage Rubber Tape.
Download data sheet:
Scotch® Linerless Rubber Splicing Tape 130C
Download brochure:
Rubber, Mastic and Specialty Tapes Application Guide (PDF, 3.98 MB)
Beware the somewhat misleading descriptors used for these lights. While the K option is described as “Warm White” and K as “Soft White,” in fact, K to these eyes has nothing to do with warm. It’s a cool, neutral light that reads bluish-white at night. We were looking to replace old “rope lights” from maybe 15 years ago that gave off a truly warm, incandescent glow. After doing some post-installation research, I now see that if you’re looking for a warm incandescent lighting effect, go for K, whatever it’s called by the vendor. Why the warmer, in fact, warmest (K) light is called “soft” rather than “warm” and the cooler (K) is called “warm” is, frankly, beyond me. Caveat emptor!
Hi JPnyc,
Thank you for your recent purchase from Hitlights. We regret to hear that your purchase did not meet your expectations, and for this, we extend our sincerest apologies. Ensuring the quality of our products is most important to us, and thank you for giving us the opportunity to do better.
Our team reached out and left a voice message to address your concern. Should you need further assistance, please do not hesitate to call us back.
Best regards,
HitLights Team
Contact us to discuss your requirements of PE Foam Tape. Our experienced sales team can help you identify the options that best suit your needs.