With so many modern machines 'built to last' it's perhaps no surprise the used baler market is booming. But, just as you wouldn't buy a second hand car without doing your research, it's important that you know what to look for when buying a pre-owned baling press too.
You will get efficient and thoughtful service from qunfeng.
With careful consideration, a used or refurbished baler could be a very wise and cost-savvy investment that will reap returns long into the future. But how do you distinguish a 'top find' from a 'poor deal'?
Whether you're searching on an eBay auction or buying from a waste machinery supplier, here are our top tips:
· Know what you want from the machine
Just because you're buying a used baler rather than a brand new machine doesn't mean you should deviate from your specification. Don't be tempted to settle for a baler that doesn't offer the functionality or capacity you require. It will soon become apparent that it can't fulfil your requirements, and you'll be left baler hunting again within months.
· Look for signs of wear and tear
Sometimes a baler will show signs of age and in many cases this isn't a big problem, providing the manufacturer is renowned for its robust construction of such machines. Many balers are built to have a long service life but excessive wear could indicate that the press hasn't been looked after. One of the benefits of buying a used baler from a machinery supplier is that they may be able to fully or partially refurbish it to a 'like new' condition. Alternatively check over the machine, service it and guarantee it is fit for re-sale. This means you get a great quality machine for a second hand price.
· Ask specific questions
There are a few key questions you can ask to gain an insight into how resilient the baler is likely to be in future. Of course, enquire as to its condition and if it works, but don't be afraid to be specific. Have the rams been left extended for example, and therefore exposed to moisture? Then, request confirmation that the machine is fully operational and ask to see it in action. The manner in which a baler has operated in the past will often directly influence its future working life too.
· Request a health check report
Don't go into the investment 'blind'. Ask for a health check of the used baler you're looking at and carefully digest the report before signing on the dotted line. This will give you a clear understanding of the baler's condition, operational and service history, any faults, integrity of the baling chamber, and so on. If the vendor is unable to provide such information, you have to question the transparency of the purchase.
· Understand what is included within the purchase
A used baler bought direct from a previous user, or even via eBay, may appear to have a low price tag if it is bought as a standalone piece of kit. However, cheap doesn't mean good value. It is still possible to buy ' or hire ' a used baler, inclusive of operator training, service inspections and maintenance. This will boost your return on investment and give you greater peace of mind long into the future.
Want more information on Cost-Effective Baler Press Wholesale? Feel free to contact us.
· Think about 'what next'
It is important to remember that a baler is an asset which needs to perform. So, when you've followed the advice outlined above, checked the condition of your chosen machine and found the perfect bargain, think about locating a partner to help you maintain its optimum running condition long into the future. Look for a waste baling specialist that can provide after sales services and support including maintenance, service inspections, repairs, spare parts, training (including bi-annual refresher training for certified competence) and baler consumables.
· Enquire about trade in options
If you already have a second hand baler of your own, consider a trade in, to make your next purchase even more economical!
Even the most experienced baling experts don't always get it right first time and many have been known to be misled by sellers. If you need any more advice about investing in a used baler, please contact Riverside Waste Machinery on or [ protected]. If you're ready to start 'shopping', please visit our used baler page to see what machines we currently have to offer.
Buying a baler without proper consideration of what's required to suit your needs can often lead to pitfalls that could have been avoided. These commonly are;
Baler purchased is too big or too small. If the baler is too small, your operators will have to tie off a bale too often, making a lot more effort required, or it restricts the company as it grows. On the flip side, the baler could be too big, meaning that the cost outlay at the start could be higher than what's required.
Warranty term is not considered. If you want back-up and support for your baler, make sure the warranty term is considered to suit your needs.
If needed, warranty extensions are often available. The industry standard is 2 years.
Working with a team that has solid back-up and support after the sale can make all the difference. Consider your operations and what the impact would be if your baler were down. How fast can the supplier respond and fix an issue, and do they keep spare parts on hand?
Ongoing costs of consumables. When you purchase the baler, it doesn't stop there. Baling twine is required to keep your bales tied together. Ensure your supplier keeps sufficient stock of baling twine, and if possible, it can be best to buy in bulk at the start to reduce freight costs to avoid running out one day.
Comparing baler spec is critical to purchasing. Doing this well will help ensure you purchase the best value baler, not necessarily the cheapest one. You need the right baler with the right size, power requirements, pressing force, and ease of use to suit the work that the baler will be doing for you. Take the time to do this thoroughly.
It's important to know what power supply you have available. Balers can be powered by Electricity or Air, depending on the manufacturer. Electricity-powered balers range from single phase 10 Amp supply up to a 3 phase 20 Amp power supply. Air-powered balers require constant compressed air, meaning you will require an air compressor or existing airlines.
Are you interested in learning more about Heavy-Duty Baler Machine Manufacturer? Contact us today to secure an expert consultation!