Can you lost wax cast stainless steel?

Industrial process based on lost-wax casting

If you want to learn more, please visit our website Cencho.

For investment casting in art, see Lost-wax casting

Inlet-outlet cover of a valve for a nuclear power station produced using investment casting

Investment casting is an industrial process based on lost-wax casting, one of the oldest known metal-forming techniques.[1] The term "lost-wax casting" can also refer to modern investment casting processes.

Investment casting has been used in various forms for the last 5,000 years. In its earliest forms, beeswax was used to form patterns necessary for the casting process. Today, more advanced waxes, refractory materials and specialist alloys are typically used for making patterns. Investment casting is valued for its ability to produce components with accuracy, repeatability, versatility and integrity in a variety of metals and high-performance alloys.

The fragile wax patterns must withstand forces encountered during the mould making. Much of the wax used in investment casting can be reclaimed and reused.[2] Lost-foam casting is a modern form of investment casting that eliminates certain steps in the process.

Investment casting is so named because the process invests (surrounds) the pattern with refractory material to make a mould, and a molten substance is cast into the mold. Materials that can be cast include stainless steel alloys, brass, aluminium, carbon steel and glass. The cavity inside the refractory mould is a slightly oversized but otherwise exact duplicate of the desired part. Due to the hardness of refractory materials used, investment casting can produce products with exceptional surface qualities, which can reduce the need for secondary machine processes.[3]

Water glass and silica sol investment casting are the two primary investment casting methods currently in use. The main differences are the surface roughness and cost of casting. Water glass method dewaxes into the high-temperature water, and the ceramic mould is made of water glass quartz sand. Silica sol method dewaxes into the flash fire, and silica sol zircon sand makes the ceramic mould. Silica sol method costs more but has the better surface than the water glass method.[4]

The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required.

Process

[

edit

]

A wax pattern used to create a jet engine turbine blade

Castings can be made from an original wax model (the direct method) or from wax replicas of an original pattern that need not be made from wax (the indirect method). The following steps describe the indirect process, which can take two to seven days to complete.

• The investment shell for casting a turbocharger rotor

• A view of the interior investment shows the smooth surface finish and high level of detail

• The completed workpiece

Advantages

[

edit

]

• Excellent surface finish[13]
• High dimensional accuracy[13]
• Extremely intricate parts are castable[13]
• Almost any metal can be cast[13]
• No flash or parting lines[13]
• Effective utilization of metal[14]
• Fewer environmental hazards from the foundry process[15]

Disadvantages

[

edit

]

The main disadvantage is the overall cost, especially for short-run productions. Some of the reasons for the high cost include specialized equipment, costly refractories, and binders, many operations to make a mould, a lot of labor is needed and occasional minute defects occur. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols.

Additionally:

• It can be difficult to cast objects requiring cores.
• This process is expensive, is usually limited to small casting, and presents some difficulties where cores are involved.
• Holes cannot be smaller than 1/16 in. (1.6 mm) and should be no deeper than about 1.5 times the diameter.[16]
• Investment castings require longer production cycles compared to other casting processes.
• There are many process factors to affect the quality of the mould and casting, so the quality management system is challenging.

Counter-gravity casting

[

edit

]

The variation on the gravity pouring technique is to fill the mould using a vacuum. A common form of this is called the Hitchiner process after the Hitchiner Manufacturing Company that invented the technique. In this technique, the mould has a downward fill pipe that is lowered into the melt. A vacuum draws the melt into the cavity; when the important parts have solidified, the vacuum is released, and the unused material leaves the mould. The technique can use substantially less material than gravity pouring because the sprue and some gating need not solidify.[17][18]

This technique is more metal efficient than traditional pouring because less material solidifies in the gating system. Gravity pouring only has a 15 to 50% metal yield compared to 60 to 95% for counter-gravity pouring. There is also less turbulence, so the gating system can be simplified since it does not have to control turbulence. The metal is drawn from below the top of the pool, so the metal is free from dross and slag (which are lower density (lighter) and float to the top of the pool). The pressure differential helps the metal flow into every intricacy of the mould. Finally, lower temperatures can be used, which improves the grain structure.[17]

This process is also used to cast refractory ceramics under the term vacuum casting.[19]

Vacuum pressure casting

[

edit

]

Vacuum pressure casting (VPC), properly referred to as vacuum assist direct pour, uses gas pressure and a vacuum to improve the quality of the casting and minimize porosity. Typically VPC machines consist of an upper and a lower chamber'the upper chamber, or melting chamber, housing the crucible, and the lower casting chamber housing the investment mould. Both chambers are connected via a small hole containing a stopper. A vacuum is pulled in the lower chamber, while pressure is applied in the upper, and then the stopper is removed. This creates the greatest pressure differential to fill the moulds.[20] The most common materials for vacuum casting process are the high nickel-based alloy and super alloys. Turbocharger products are a common applications for this casting process,[21] though it is also regularly used in the manufacture of silver and gold jewellery.

Details

[

edit

]

Investment casting is used with almost any castable metal. However, aluminium alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms.[22] The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in). Typical tolerances are 0.1 mm for the first 25 mm (0.005 in for the first inch) and 0.02 mm for the each additional centimeter (0.002 in for each additional inch). A standard surface finish is 1.3'4 micrometres (50'125 μin) RMS.[13]

History

[

edit

]

The history of lost-wax casting dates back thousands of years.[23] Its earliest use was for idols, ornaments and jewellery, using natural beeswax for patterns, clay for the moulds and manually operated bellows for stoking furnaces. Examples have been found across the world, such as in the Harappan Civilisation (' BC) idols, Egypt's tombs of Tutankhamun (' BC), Mesopotamia, Aztec and Mayan Mexico, and the Benin civilization in Africa where the process produced detailed artwork of copper, bronze and gold. By far, one of the earliest identified uses of the investment casting process was seen in objects found in the 'Cave of Treasure', discovered in Southern Israel. These items were identified as being made around BC using Carbon-14 dating techniques.[24]

For more information, please visit stainless steel lost wax casting parts factory.

The earliest known text that describes the investment casting process (Schedula Diversarum Artium) was written around A.D. by Theophilus Presbyter, a monk who described various manufacturing processes, including the recipe for parchment. This book was used by sculptor and goldsmith Benvenuto Cellini ('), who detailed in his autobiography the investment casting process he used for the Perseus with the Head of Medusa sculpture that stands in the Loggia dei Lanzi in Florence, Italy.

Investment casting came into use as a modern industrial process in the late 19th century, when dentists began using it to make crowns and inlays, as described by Barnabas Frederick Philbrook of Council Bluffs, Iowa in .[25] Its use was accelerated by William H. Taggart of Chicago, whose paper described his development of a technique[citation needed]. He also formulated a wax pattern compound of excellent properties, developed an investment material, and invented an air-pressure casting machine.

In the s, World War II increased the demand for precision net shape manufacturing and specialized alloys that could not be shaped by traditional methods, or that required too much machining. Industry turned to investment casting. After the war, its use spread to many commercial and industrial applications that used complex metal parts.

Applications

[

edit

]

Unveiling the titanium integral space bus satellite by Planetary Resources in February . The sacrificial mould for the investment casting was 3D-printed with integral cable routing and toroidal propellant tank. From left: Peter Diamandis, Chris Lewicki, and Steve Jurvetson.

Investment casting is used in the aerospace and power generation industries to produce turbine blades with complex shapes or cooling systems.[13] Blades produced by investment casting can include single-crystal (SX), directionally solidified (DS), or conventional equiaxed blades.

Investment casting is also widely used by firearms manufacturers to fabricate firearm receivers, triggers, hammers, and other precision parts at low cost.[citation needed]

Karsten Solheim famously revolutionized golf club design through his company PING by incorporating investment casting for the first time for clubheads.[26] Quickly the process became an industry standard to allow weight distribution around the perimeter of the clubhead.

Other industries that use standard investment-cast parts include military, aerospace, medical, jewelry, airline, automotive and golf clubs especially since the start of 3D printing technology.

With the increased availability of higher-resolution 3D printers, 3D printing has begun to be used to make much larger sacrificial moulds used in investment casting. Planetary Resources has used the technique to print the mould for a new small satellite, which is then dipped in ceramic to form the investment cast for a titanium space bus with integral propellant tank and embedded cable routing.

See also

[

edit

]

References

[

edit

]

Notes

[

edit

]

Bibliography

[

edit

]

Stainless steel castings are mainly cast by lost wax casting because it can reach a high accurate surface and dimension. 

Investment casting or lost wax casting is a method of precision casting complex near-net-shape details using replication of wax patterns. Investment casting or lost wax is a metal forming process that typically uses a wax pattern surrounded by a ceramic shell to make a ceramic mold. When the shell dries, the wax is melted away, leaving only the mold. Then the casting component is formed by pouring molten metal into the ceramic mold.

The most widely-used materials of stainless steel mainly include (but not limited to): Stainless Steel: AISI 304, AISI 304L, AISI 316, AISI 316L, 1., 1. and other stainless steel grade.

Stainless steel has a minimum chromium content of 10.5%, making it more resistant to corrosive liquid environments and to oxidation. It is highly corrosion resistant and wear resistant, provides excellent machinability, and is well-known for its aesthetic appearance. Stainless steel investment castings are "corrosion-resistant" when used in liquid environments and vapors below °F (650°C) and "heat-resistant" when used above this temperature.

The base alloy elements of any nickel-base or stainless steel investment casting are chromium, nickel, and molybdenum (or "moly"). These three components will determine the casting's grain structure and mechanical properties and will be instrumental in the casting's ability to combat heat, wear, and corrosion.

Our lost wax casting foundry can manufacture custom stainless steel investment castings that match your exact design specifications. For parts ranging from tens of grams to tens of kilograms or more, we provide tight tolerances and consistent part to part repeatability.

Commonly, the stainless steel should be cast by the investment precision casting process with the silica sol as the bond. The stainless steel silica sol castings have a very high grade of precision surface and performance.

Due to its unique physical properties, stainless steel castings are popular in a wide range of applications, especially those in harsh environments. Common markets for stainless steel investment castings include oil and gas, fluid power, transportation, hydraulic systems, food industry, hardware and locks, agriculture...etc.

The process is suitable for repeatable production of net shape components from a variety of different metals and high performance alloys. Although generally used for small castings, this process has been used to produce complete aircraft door frames, with steel castings of up to 500 kgs and aluminium castings of up to 50 kgs. Compared to other casting processes such as die casting or sand casting, it can be an expensive process. However, the components that can be produced using investment casting can incorporate intricate contours, and in most cases the components are cast near net shape, so require little or no rework once cast.

Silica sol casting process is the main steel investment casting process of RMC investment casting foundry. We have been developing new technology of adhesive material to achieve much more economical and effective adhesive material to build the slurry shell. It is a overwhelming trend that Silica sol casting process replaces the rough inferior water glass process, especially for stainless steel casting and alloy steel casting. Besides the innovated molding material, the silica sol casting process has also being innovated to much steadier and less heat expanding.

' Ferrous and Non-ferrous Materials for Investment Casting, Lost Wax Casting Process: 
' Gray Iron: HT150, HT200, HT250, HT300, HT350; GJL-100, GJL-150, GJL-200, GJL-250, GJL-300, GJL-350; GG10~GG40.
' Ductile Iron or Nodular Iron: GGG40, GGG50, GGG60, GGG70, GGG80; GJS-400-18, GJS-40-15, GJS-450-10, GJS-500-7, GJS-600-3, GJS-700-2, GJS-800-2; QT400-18, QT450-10, QT500-7, QT600-3, QT700-2, QT800-2;
' Carbon Steel: AISI - AISI , C30, C40, C45.
' Steel Alloys: ZG20SiMn, ZG30SiMn, ZG30CrMo, ZG35CrMo, ZG35SiMn, ZG35CrMnSi, ZG40Mn, ZG40Cr, ZG42Cr, ZG42CrMo...etc on request.
' Stainless Steel: AISI 304, AISI 304L, AISI 316, AISI 316L, 1., 1., 1., 1., 1., 1. and other stainless steel grade.
' Brass, Red Copper, Bronze or other Copper-based alloy metals: ZCuZn39Pb3, ZCuZn39Pb2, ZCuZn38Mn2Pb2, ZCuZn40Pb2, ZCuZn16Si4
' Other Materials as per your unique requirements or according to ASTM, SAE, AISI, ACI, DIN, EN, ISO, and GB standards

' Capabilities of Investment Casting Foundry
' Max Size: 1,000 mm × 800 mm × 500 mm
' Weight Range: 0.5 kg - 100 kg
' Annual Capacity: 2,000 tons
' Bond Materials for Shell Building: Silica Sol, Water Glass and their mixtures.
' Tolerances: On Request.

' Main Production Procedure
' Patterns & Tooling Design ' Metal Die Making ' Wax Injection ' Slurry Assembly ' Shell Building ' De-Waxing ' Chemical Composition Analysis ' Melting & Pouring ' Cleaning, Grinding & Shot Blasting ' Post Processing or Packing for Shipment

 

Want more information on ball valve wog? Feel free to contact us.