Diamond Blade Tips

• Open up the diamonds on a new blade with shallow cuts in soft, abrasive material (eg. limestone). This will stop the blade chattering or skipping on the first job.
• For normal cutting, multiple shallow cuts (step cuts) are better than one single deep cuts.
• Do not force the blade. Forcing or twisting the blade can cause bluntness, excessive wear, overheating, distortion and segment damage.
• Do not side grind.
• If your slurry colour changes to brown or red, you are most probably cutting the dirt or sub base. This will wear your diamond blade quicker, so raise your blade.
• If you're going to change directions on a floor saw, make sure your machine is off and the blade is up out of the cut before changing direction.
• If your blade does not have a direction indication on it, you should be able to see a "comet tail" behind exposed diamonds if the blade was "broken in" at the factory. This indicated the direction - the tail should be behind the comet. If you put a blade on in the direction opposite to the directional arrow you may experience a little slower cutting or a little vibration at first until the diamond is exposed on the opposite side.  This should not harm the blade as long as you maintain the same direction but may reduce the life fractionally if it is continually reversed.
• A smaller blade on your machine will decrease the cutting depth, but increase the power and speed of cutting. For example, many customers use 12"/300mm blades on a cut off saw that could use a 14"/350mm blade.
• If you are using the blade dry (not recommended due to dust and safety issues), be aware that it will shorten the blade's life, and you will need to air cool the blade regularly -  take the blade out of the cut to allow the air to prevent the blade from overheating.

Diamond Blade Troubleshooting

Glazing - This is one of the most common diamond blade problems. As a diamond blade is used, the bond wears, exposing more diamond that continue cutting. If the bond does not wear back, then eventually there is no diamond exposed, so the blade will slow down and stop cutting. The cutting surface of the blade will feel smooth. This is known as glazing or polishing.
Rectify by re dressing the blade by cutting an #80 grit dressing stone ( we sell them here ).
As an alternative, use an abrasive material like limestone to remove some bond and expose diamonds so cutting can continue.
Possible causes are:

If you want to learn more, please visit our website Corediam.

• The bond is too hard for the material it is cutting - select the correct blade.
• Too much water is being used (sometimes unavoidable if the tile cracks easily with heat)
• The machine is not powerful enough for the specification (usually experienced more with professional blades and saws)
• The blade has been mounted with the rotation arrow the wrong way. 

See this short video on how to deglaze your diamond blade (in this case a tile saw blade, but the basics are the same for all blades).

Product Name

3 inch 10 Segments Metal Bond diamond Grinding disc Concrete floor tools

Model NO.

DFG-02

Brand

MAXSHINE

Grit

#6, #16, #25, #30, #50, #80, #100, #200, #400 etc

Bond

Extreme Hard, Hard, Medium, Soft, Extreme Soft

Material

Diamond and metal powder combination

Segment  NO.

10 Bars

Segment Size

24*20/5*8mm

Colors

Pink, Green, Red, Black, Blue, Yellow, Purple or as customer request colors

MOQ

9pcs 

Usage

Wet or dry use for Concrete and Terrazzo

Application 

Suitable for floor grinding machine

 

 

 

Advantages

Advantages

1. Durable metal compound
2. Effective in the process of grinding and polishing concrete floor
3. Different granularities and sizes as requested
4. Competitive prices and superior quality
5. Excellent service
6. OEM and ODM are available.

Package 

Carton box for each piece or customers requirement.

Lead time

Regular orders 7-10 days upon payment receievd.

Payment Method

T/T, Paypal, Escrow

Shipping

By sea, by air and by international express, like

 

DHL, FedEx, UPS etc.

Certificate

SGS Product Quality Control

Main Market 

North America, Oceania, Europe

As a professional manufacturer,

 

SMT ( MAXSHINE ), provide one stop diamond services like following for concrete and Terrazzo floor care.

*

PCD Tools: For 

concrete floor 

preparation

, the 

epoxy and 

coatings removal

*

Diamond 

Metal 

G

rinding

 Shoes

If you are looking for more details, kindly visit Diamond Grinding Shoes Wholesale.

 with 

Extreme Soft Bond, S

oft 

B

ond, 

M

edium

 

Bond, H

ard 

B

ond 

and Extreme Hard Bond 

for grinding

 different hardness 

concrete

 floor and Terrazzo.

*

Hybrid Polishing Pads, removing well the scratch that diamond metal bond left and and good

 preparing 

for 

diamond 

resin bond begin

.

*

Diamond 

Resin 

P

olishing

 Pads 

for concrete

 floor, Terrazzo and Stone with

 

fast shine

 

and perfect finishing.

If you want to learn more, please visit our website Diamond Core Drill Bits China factory.