Saddle clips, variously called butterfly clips, M-clips or grating clips are new in the market. Being a saddle clip manufacturer and supplier ourselves, we frequently get to hear these questions from our clients. So we thought why not address all of them in a blog.
If you want to learn more, please visit our website Solid.
Let's proceed to the questionnaire and answer each of them one by one.
What does a Saddle Clip do?
They are used on installations where the grating is subject to frequent removal and replacement. Saddle clips are used as a grating fastener to attach the grating securely and easily to the steel structures, without the need for dangerous drilling or welding.
What is a saddle clip made up of?
Saddle clips are constructed from premium quality welded steel and pressure-locked aluminum or steel grating with bearing bars. The saddle clip's sturdy construction ensures that it possesses good corrosion resistance, dimensional stability, and durability.
Related: The Specialty Of Saddle Clip And Variety In It's Kind
Who is/are the leading saddle clip manufacturer and supplier in India?
Ferrotech, Gratemetal, and Jigo are among the most prominent manufacturers and suppliers of saddle clips. Their products meet the highest standard of the most sophisticated client.
What are the advantages of using a Saddle Clip?
They are best suited in industrial environments where drilling and welding are not permitted. Since there are no special permissions required, installing a saddle clip does not lead to any stoppage of work which in turn saves time and money. Saddle clips are quite easy to install and their uncomplicated design facilitates seamless insertion instantaneously by using simple hand tools like a flat head screwdriver. Last but not the least, a saddle clip can easily be removed, allowing the grating to be re-positioned or removed for maintenance purposes.
Want more information on SS Saddle Clamp? Feel free to contact us.
Let JiGO be your choice for the best Saddle Clip Manufacturer and Supplier:
Our Grating clips are exclusively designed for clients looking for affordably priced clips with no compromise on quality.
We take pride in the fact that our extensive range of products and services has seen massive success and are a market favorite in India. With a strong 300 dealer network throughout India, our timely delivery is surely going to impress you.
So place your order with us before our superior quality saddle clips run out of stock!
I've already perused your archives and have seen all the negative post re saddle valves. However...please keep an open mind.
I have a saddle tapped-in to the hot water supply (directly from hot water heater) for
my humidifyer. I've been in the house 3 years and have never used it (not sure how much the previous owners used it.) I decided to boot it up this season to see if it made a difference. Long story short, saddle valve has apparently failed. (Just FYI, the small "pin-type handle opens and closes freely.) I removed the copper line at the valve and opened the valve up, got nothing. I tightened up and then loosened up the fittings to see if that would free up the supply but no good.
I don't want to spend a lot of money (hiring a plumber)because if I even get the thing booted up, I may decide I don't like or don't need it and shut it down.
So...what are my options?
First, is there something besides a saddle valve that can be used - without having to sweat pipe that a handy homeowner can use?
And/or, can I simply replace the saddle valve (over the existing piercing) with a new one?
And finally, what should I have on hand and/or use to "patch" the pierced pipe if for whatever reason I need to or decide to abort? Do they sell some type of clamp, and are they for long term use if I remove the saddle?
Know this is long, but thanks to any and all who can give advise or an opinion.
Thanks again and happy holidays.
-DC
Happy Holidays to you also.
Even though you do not want to hire a plumber to correct the problem, it's the right thing to do.
It should not cost a heck of a lot to cut a tee into the line and install the "proper" valve if it's copper.
Saddle/self piercing valves are against code here, for obvious reasons.
If you attempt it yourself by installing a replacement saddle valve, make sure that you have a stainless steel clamp & a piece of rubber on hand if it doesn't go as planned, the piping under the valve could possibly be damaged.
...Then you will need a plumber for sure.
e-plumber
e-plumber
-----------------------------------------------------------------------------------------------------------------------------------
"The society which scorns excellence in Plumbing as a humble activity and tolerates shoddiness in philosophy because it is an
exalted activity will have neither good Plumbing nor good philosophy: neither its pipes nor its theories will hold water." -
John William Gardner 10/8/ - 2/16/
Repair your leaking Plumbing fixtures ASAP [www.theplumber.com]
This slow drip will waste 7+ gallons of water per day.
If you could find an alternate source of hot water to see if you want to use the humidifyer, that would be the easiest way. You can find a female-hose x 1/4" compression fitting and put it on the laundry or water heater drain (after draining some water off) as a temp source. Next thing to try is to turn off the hot water and see why the saddle valve isn't working, it may be clogged with debris. They come with a rubber gasket that may not survive though.
You should make sure that you don't spend a lot of time dancing around a problem that could have been fixed in one quick service call.
Thanks to e-plumber and steve_g for responding. I really do appreciate your responses. Although not quite what I was hoping to hear. A couple of follow-up questions and comments:
I'm not familiar with what the codes are. Any idea if saddle valves are against code in NJ? And if so, is it only "against code" for professionals, while homeowners are still allowed to use them? (just curious what the "rules" are.)
Also, I was really suggesting replacing the valve (and wanting to know what my chances were of success)in repairing/replacing the valve for use for a month or 2, or possible the full season. If I was going to continue to use the humidifyer next year, I would have had a tee installed. SO I was really inquiring about a shorter term solution
Since there seems to be nothing I can do without calling a plumber, you now have me wondering. I have that saddle valve, seemingly stable (i.e., not working, but not leaking) and a second saddle valve on a cold water line for an ice maker, which is no longer being used. The copper line was snipped, and the remaining 2 inches or so simply crimped. Presuming I ditch the idea of "fixing" the existing saddle valve, do you recommend that I have either or both of those valves removed? In other words, is the failure that it no longer works, or that one or both are likely to start leaking at some point and should be removed?
Again, thanks very much.
-DC
Just because something may or may not be against code doesnt mean a homeowner or plumber cant just simply do what needs to be done to remedy a problem. Codes are inforced when selling a home or purchasing one I dont think an inspector would randomly show up at your house and tell you to remove a saddle because its against code. Anyway, saddles do blow but if you insist. Turn water off to house
Install new saddle in same hole
where existing one is.
You dont want to hear this but
you might mess something up and
end up calling plumber anyway.
GOOD LUCK
In my town, they are against code, but if you hire someone, even licensed, to install a humidifier they will put in a saddle valve unless you either have a regular valve there or are willing to pay them to do it. If you get a house inspected, they will note that it's not the best thing to have, but the house will still pass inspection. Dishwasher installer is the same thing.
Plumbers, in my experience, will replace it if they are installing something or replacing supply lines. Or is you just ask them to of course.
Now, if you do a renevation with a permit I think the city will require that you not use a saddle valve.
My opinion, call 3 places and get quotes to have a valve installed in it's place.
What kind of humidifier is it you want to hook up? How old is it? Is it worth trying the old one?
John
I have a supply house that is providing the compression tee with valve that jj is referring to. It's my understanding that most codes do not allow the saddle valve. There was a big fight at the UPC again this year but not as big as the AAV fight. I'll need to check but I also thought the International code didn't allow them.
Codes are the minimum standard for a community. That the work and products in a structure meet a certain standard. This protects subsequent purchasers, insurance and mortgage companies as well as the current owner/user. Codes are not for just when there's an inspection. Most code items don't require an inspection.
For more Tapping Saddleinformation, please contact us. We will provide professional answers.