Subrack and cabinet numbering rules | PDF - SlideShare

09, Jun. 2025

 

Subrack and cabinet numbering rules | PDF - SlideShare

  • 1. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description Issue 03 Date -07-30 HUAWEI TECHNOLOGIES CO., LTD.
  • 2. Copyright © Huawei Technologies Co., Ltd. . All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen People's Republic of China Website: http://www.huawei.com : Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i
  • 3. Contents 1 Introduction....................................................................................................................................1 1.1 Scope..............................................................................................................................................................................1 1.2 Intended Audience..........................................................................................................................................................1 1.3 Change History...............................................................................................................................................................1 2 Overview.........................................................................................................................................4 2.1 Base Stations and Cabinets.............................................................................................................................................4 2.1.1 Mapping Between Base Station Models and Cabinet Types.......................................................................................4 2.1.2 Cabinet Numbering Rules...........................................................................................................................................8 2.2 Subrack.........................................................................................................................................................................11 2.2.1 Subrack Types...........................................................................................................................................................11 2.2.2 Subrack Numbering Rules.........................................................................................................................................12 2.3 BBU Board Types........................................................................................................................................................14 2.4 Typical Cabinet and Subrack Configurations for Series Base Stations...............................................................16 3 Related Features...........................................................................................................................24 4 Impact on the Network...............................................................................................................25 5 Engineering Guidelines.............................................................................................................26 5.1 Information to Be Collected.........................................................................................................................................26 5.2 Feature Deployment.....................................................................................................................................................26 5.2.1 Deployment Requirements........................................................................................................................................26 5.2.2 Network Planning......................................................................................................................................................26 5.2.3 Data Preparation........................................................................................................................................................26 5.2.4 Feature Activation/Initial Configuration...................................................................................................................35 5.2.5 Activation Observation..............................................................................................................................................37 5.3 Feature Reconfiguration...............................................................................................................................................37 5.3.1 Modifying Cabinet Configuration.............................................................................................................................37 5.3.2 Modifying Subrack Configuration.............................................................................................................................39 5.3.3 Modifying BBU Board Configuration.......................................................................................................................40 5.3.4 Deleting BBU Boards................................................................................................................................................42 5.4 BBU Board Maintenance..............................................................................................................................................44 5.4.1 Resetting BBU Boards...............................................................................................................................................44 5.4.2 Querying BBU Board Information............................................................................................................................45 SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description Contents Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii
  • 4. 6 Parameters.....................................................................................................................................46 7 Counters........................................................................................................................................60 8 Reference Documents.................................................................................................................61 SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description Contents Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii
  • 5. 1Introduction 1.1 Scope This document describes which cabinets and subracks are required for different base station models and how to configure them. This document also describes how to configure and maintain boards in a baseband unit (BBU) subrack. The base stations mentioned in this document refer to series base stations. Any managed objects (MOs), parameters, alarms, or counters described in this document correspond to the software release delivered with this document. In the event of updates, the updates will be described in the product documentation delivered with the latest software release. 1.2 Intended Audience This document is intended for personnel who: l Need to understand the features described herein l Work with Huawei products 1.3 Change History This section provides information about the changes in different document versions. There are two types of changes, which are defined as follows: l Feature change Changes in features of a specific product version l Editorial change Changes in wording or addition of information that was not described in the earlier version 03 (-07-30) This issue includes the following changes. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 1 Introduction Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 1
  • 6. Change Type Change Description Parameter Change Feature change Added rules when configuring RRU subrack numbers. For details, see section Table 2-8. None Editorial change None. None 02 (-06-25) This issue includes the following changes. Change Type Change Description Parameter Change Feature change Added a parameter for modifying the baseband board configurations of co-MPT base stations. For details, see section Modifying the Baseband Board Configuration. CPRIEX Editorial change Incorporated the original chapter "Configuration Rules" into 2 Overview. None 01 (-04-28) This issue includes the following changes. Change Type Change Description Parameter Change Feature change Added the following configuration rules for upgraded BTS series base stations: l Added nameplates and logical names of cabinets to Table 2-1. l Added cabinet numbering rules to Table 2-6. l Added subrack numbering rules to Table 2-9. Value range of TYPE Editorial change None None SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 1 Introduction Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2
  • 7. Draft A (-01-15) Compared with issue 03 (-09-15) of SRAN7.0, Draft A (-01-15) of SRAN8.0 includes the following changes. Change Type Change Description Parameter Change Feature change l Added configurations and maintenance modes of cabinets, subracks, and BBU boards to eGBTSs and co-MPT base stations. For details, see chapter 5 Engineering Guidelines. l Added cabinet nameplates for upgraded cabinets to Table 2-1. None. Editorial change None. None. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 1 Introduction Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 3
  • 8. 2Overview 2.1 Base Stations and Cabinets 2.1.1 Mapping Between Base Station Models and Cabinet Types The series base stations have the following models: l BTS l BTSL l BTSA l BTSAL l DBS l BTSC The series base stations have the following cabinet types: l BTS l BTSL l Advanced power module (APM30) series cabinets l Radio frequency cabinet (RFC) l Transmission cabinet (TMC) series cabinets l Outdoor mini box (OMB) l Battery backup cabinet (BBC) l BTSAL l TPA-H17B1 l BTS_SRAN cabinet l BTSII_SRAN cabinet l BTSAE_SRAN cabinet l VIRTUAL cabinet SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 4
  • 9. For details about the mapping between base station models and cabinet types, see section Table 2-1. NOTE VIRTUAL indicates a virtual cabinet. It can be an object in physical entity modeling, for example, a legacy cabinet or a cabinet type not included in the existing cabinet types. It can also be an object when there is no physical entity, for example, when a base station is installed in an open rack. Table 2-1 Mapping between base station models and cabinet types Base Station Model Physical Cabinet Cabinet Nameplate Logical Name DBS APM series cabinet APM30/APM30H (Ver.A)/APM30H (Ver.B)/APM30H (Ver.C)/APM30H (Ver.D) /APM30H (Ver.D_A1)/ APM30H (Ver.D_A2)/ APM30H (Ver.D_B) APM30 OMB cabinet OMB/OMB (Ver.C) OMB TMC series cabinet TMC/TMC11H (Ver.A)/TMC11H (Ver.B)/TMC11H (Ver.C)/TMC11H (Ver.D) /TMC11H (Ver.D_A1)/ TMC11H (Ver.D_A2)/ TMC11H (Ver.D_B) TMC TPA-H17B1 cabinet TPA-H17B1 TPA Battery cabinet BBC BBC SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 5
  • 10. Base Station Model Physical Cabinet Cabinet Nameplate Logical Name IBBS200T (Ver.A) IBBS200D (Ver.B)/ IBBS200T (Ver.B) IBBS200D (Ver.C)/ IBBS200T (Ver.C) IBBS200D (Ver.D)/ IBBS200T (Ver.D) IBBS200D (Ver.D_A)/ IBBS200T (Ver.D_A) IBBS200D (Ver.D_B)/ IBBS200T (Ver.D_B) BBC IBBS700D/ IBBS700T BBC Virtual cabinet, including indoor centralized rack (ICR), IMB03, and 19-inch rack - VIRTUAL BTSC(1) OMB cabinet BTSC/ BTSC (Ver.C) OMB BTS BTS cabinet BTS (Ver.B)/ BTS (Ver.C)/ BTS (Ver.D)/ BTS (Ver.D_A)/ BTS (Ver.D_B) BTS BTS cabinet BTS (Ver.D_Z) BTS_SRAN BTSII cabinet/ BTSIII cabinet BTS (Ver.D_Z) BTSII_SRAN Virtual cabinet - VIRTUAL SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 6
  • 11. Base Station Model Physical Cabinet Cabinet Nameplate Logical Name BTSA APM series cabinet APM30/APM30H (Ver.A)/APM30H (Ver.B)/APM30H (Ver.C)/APM30H (Ver.D) /APM30H (Ver.D_A1)/ APM30H (Ver.D_A2)/ APM30H (Ver.D_B) APM30 RFC cabinet RFC (Ver.B)/RFC (Ver.C)/RFC (Ver.D_A)/RFC (Ver.D_B) RFC TMC series cabinet TMC/TMC11H (Ver.A)/TMC11H (Ver.B)/TMC11H (Ver.C)/TMC11H (Ver.D) /TMC11H (Ver.D_A1)/ TMC11H (Ver.D_A2)/ TMC11H (Ver.D_B) TMC Battery cabinet BBC BBC IBBS200T (Ver.A) IBBS200D (Ver.B)/ IBBS200T (Ver.B) IBBS200D (Ver.C)/ IBBS200T (Ver.C) IBBS200D (Ver.D)/ IBBS200T (Ver.D) IBBS200D (Ver.D_A)/ IBBS200T (Ver.D_A) IBBS200D (Ver.D_B)/ IBBS200T (Ver.D_B) BBC IBBS700D/ IBBS700T BBC BTSAE cabinet BTSAE (Ver.D_Z) BTSAE_SRAN SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 7
  • 12. Base Station Model Physical Cabinet Cabinet Nameplate Logical Name Virtual cabinet - VIRTUAL BTSL BTSL cabinet BTSL (Ver.B)/ BTSL (Ver.C)/ BTSL (Ver.D)/ BTSL (Ver.D_B) BTSL Virtual cabinet - VIRTUAL BTSAL BTSAL cabinet BTSAL (Ver.A) BTSAL TMC series cabinet TMC11H (Ver.C) TMC Battery cabinet IBBS700D/ IBBS700T BBC Virtual cabinet - VIRTUAL NOTE (1) The BTSC is a type of distributed base station. The logical names of other cabinets used by the BTSC are configured to the same as those of the DBS. 2.1.2 Cabinet Numbering Rules Cabinet numbers range from 0 to 62, and cabinets where BBUs reside must be numbered 0 to 7. Otherwise, software cannot work properly. Table 2-2, Table 2-3, Table 2-4, Table 2-5 and Table 2-6 describe how cabinets are numbered. Table 2-2 BTS and BTSL cabinet numbering rules Logical Name of the Cabinet Cabinet Number Description BTS/ BTSL/ VIRTUAL 0 to 7 Assigned according to the sequence of deploying base stations. For example, if a site has only one BBU, the BBU is configured in cabinet 0. If a site has two BBUs, it is recommended that the primary BBU be configured in cabinet 0. Reserved 8 to 9 Reserved for other cabinets not mentioned in this document APM30/TMC/ VIRTUAL/BBC/ OMB 10 to 19 Remote cabinets used for monitoring UMTS/LTE RRUs SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 8
  • 13. Logical Name of the Cabinet Cabinet Number Description APM30/TMC/ VIRTUAL/BBC/ OMB 20 to 29 Remote cabinets used for monitoring GSM RRUs Reserved 30 to 62 Reserved for other cabinets not mentioned in this document Table 2-3 BTSAL cabinet numbering rules Logical Name of the Cabinet Cabinet Number Description BTSAL/ VIRTUAL 0 to 7 Assigned according to the sequence of deploying base stations. The BBU is configured in cabinet 0. TMC 8 Transmission cabinets BBC 9 to 10 BTSAL supporting BBC cabinets APM30/TMC/ VIRTUAL/BBC/ OMB 10 to 19 Remote cabinets used for monitoring UMTS/LTE RRUs (In new deployment scenarios, it is recommended that you number this type of cabinet sequentially from 11 if a BBC cabinet is numbered 10) APM30/TMC/ VIRTUAL/BBC/ OMB 20 to 29 Remote cabinets used for monitoring GSM RRUs Reserved 30 to 62 Reserved for other cabinets not mentioned in this document Table 2-4 BTSA and DBS (including outdoor APM30H) cabinet numbering rules Logical Name of the Cabinet Cabinet Number Description APM30/TMC 0 APM30, TMC, or virtual cabinet where a BBU resides. Assigned according to the sequence of deploying base stations. For example, if a site has only one BBU, the BBU is configured in cabinet 0; if a site has two BBUs, it is recommended that the primary BBU be configured in cabinet 0. RFC/VIRTUAL 1 to 4 Cabinets where RFUs reside, including virtual cabinets and RFC cabinets SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 9
  • 14. Logical Name of the Cabinet Cabinet Number Description APM30/TMC/ VIRTUAL 5 to 7 APM30H, TMC11H, and virtual cabinet TMC 8 Transmission cabinets (not configuring BBUs) BBC 9 to 14 APM30 supported BBC cabinets APM30/TMC/ VIRTUAL/BBC/ OMB 10 to 19 Remote cabinets used for monitoring UMTS/LTE RRUs (In new deployment scenarios, it is recommended that you number this type of cabinet sequentially from 11 if a BBC cabinet is numbered 10) APM30/TMC/ VIRTUAL/BBC/ OMB 20 to 29 Remote cabinets used for monitoring GSM RRUs Reserved 30 to 62 Reserved for other cabinets not mentioned in this document Table 2-5 DBS indoor scenario or OMB cabinet numbering rules Logical Name of the Cabinet Cabinet Number Description OMB/VIRTUAL 0 to 7 OMB or virtual cabinet where a BBU resides, assigned according to the sequence of deploying base stations. Reserved 8 to 9 Reserved for other cabinets not mentioned in this document APM30/TMC/ VIRTUAL/BBC/ OMB 10 to 19 Remote cabinets used for monitoring UMTS/LTE RRUs APM30/TMC/ VIRTUAL/BBC/ OMB 20 to 29 Remote cabinets used for monitoring GSM RRUs Reserved 30 to 62 Reserved for other cabinets not mentioned in this document SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 10
  • 15. Table 2-6 Upgraded BTS series cabinet numbering rules Logical Name of the Cabinet Cabinet Number Description BTS_SRA N/ BTSAE_SR AN 0 to 7 Assigned according to the sequence of deploying base stations. Cabinets where BBUs reside are numbered from 0 to 7. For example, if a site has only one BBU, the BBU is configured in cabinet 0. If a site has two BBUs, it is recommended that the primary BBU be configured in cabinet 0. Reserved 8 Reserved for other cabinets not mentioned in this document BBC 9 to 12 Supported BBCs APM30/TMC/ VIRTUAL/BBC/ OMB 10 to 19 Remote cabinets used for monitoring UMTS/LTE RRUs (In new deployment scenarios, numbers 10, 11, and 12 are preferentially used for BBCs.) APM30/TMC/ VIRTUAL/BBC/ OMB 20 to 29 Remote cabinets used for monitoring GSM RRUs Reserved 30 to 62 Reserved for other cabinets not mentioned in this document 2.2 Subrack 2.2.1 Subrack Types Table 2-7 lists the subrack types. Table 2-7 Subrack types Logical Name of the Subrack Description BBU BBU subrack: 2 U (88.9 mm or 3.50 in.) RFU RFU subrack PMU Power subrack TCU Temperature control device subrack FMU RFU fan subrack BAT Battery subrack RRU RRU subrack SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 11
  • 16. Logical Name of the Subrack Description EMU EMU subrack GRU GPS receiver subrack CCU CCU subrack 2.2.2 Subrack Numbering Rules Entity subracks, such as BBU subracks and RFU subracks, depend on cabinet types. Extension subracks house optional peripherals, such as EMUs and GPS receivers. To ensure subrack number consistency and scalability, a peripheral can occupy an extension subrack independently. Subrack numbers range from 0 to 254. Numbers of entity subracks cannot be changed. Numbers of extension subracks can be defined by users. Table 2-8 and Table 2-9 describe how subracks are numbered. Table 2-8 Subrack numbering rules for BTS series base stations (including upgraded ones) Logical Name of the Subrack Subrack Number Subrack Type Description BBU 0 to 1 Entity subrack None RFU 4 to 5 Entity subrack RFU subrack. RFUs can be configured in subracks 4 and 5 in BTSL and virtual cabinets, and only in subrack 4 in other cabinets. PMU 7 Entity subrack None TCU 8 Entity subrack None FMU 11 to 12 Entity subrack None CCU 15 Entity subrack None GRU/ EMU 40 to 59 Extension subrack GPS receivers, EMUs, and GATMs can be configured in extension subracks. You are advised to configure the GATM in subrack 50 or 51. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 12
  • 17. Logical Name of the Subrack Subrack Number Subrack Type Description RRU 60 to 254 Entity subrack You are advised to comply with the following rules when configuring RRU subrack numbers: l The RRU subrack numbers for the same project must consistent with each other. l If a multimode RRU needs to be configured in multiple modes, it must be configured with the same subrack number. Otherwise an alarm is generated, indicating the configuration conflict. l The RRU subrack numbers are numbered starting from the lowest band that the RRUs support. Some subrack numbers need to be reserved for capacity expansion. For example, in a network using the RRU of 900 MHz, RRU of MHz, and RRU of MHz, the subrack numbers are assigned as follows: 60 to 69 are assigned to the RRUs of 900 MHz, 70 to 79 are assigned to the RRUs of MHz, and 80 to 89 are assigned to the RRUs of MHz. Reserved 2 to 3 Reserved None Reserved 6 Reserved None Reserved 9 to 10 Reserved None Reserved 13 to 14 Reserved The TCU can be configured in subrack 14 in a virtual cabinet. Reserved 16 to 39 Reserved None SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 13
  • 18. Table 2-9 Upgraded BTS series base station subrack numbering rules Logical Name of the Subrack Subrack Number Subrack Type Description BBU 0 Entity subrack None BBU 1 Entity subrack None RFU 4 Entity subrack None RFU 5 Entity subrack RFU subrack, not housing any board PMU 7 Entity subrack None TCU 8 Entity subrack None FMU 11 Entity subrack None RRU 60 to 254 Entity subrack RRU subrack, which must be configured in cabinet 0 Reserved 2 to 3 Reserved None Reserved 6 Reserved None Reserved 9 to 10 Reserved None Reserved 12 to 19 Reserved None MCS 20 Entity subrack MCS, not housing any board AFS 21 Entity subrack AFS, not housing any board Reserved 22 to 39 Reserved None Reserved 40 to 59 Extension subrack For housing the EMU and other boards 2.3 BBU Board Types Table 2-10 lists the modules that can be configured in a BBU and the corresponding configuration rules. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 14
  • 19. Table 2-10 Configurations of modules in a BBU Board Name Full Name Logical Name Cabinet Number Subrack Number Slot Number Quantity WBBP WCDMA baseband processing unit WBBP 0 to 7 0 to 1 Slots 0 to 5 0 to 6 LBBP LTE baseband processing unit LBBP 0 to 7 0 to 1 Slots 0 to 5 0 to 6 UTRP Universal transmissi on processing unit UTRP 0 to 7 0 to 1 GSM: Slots 0 to 4 UMTS/ LTE: Slots 0 to 6 0 to 1 USCU Universal satellite card and clock unit USCU 0 to 7 0 to 1 Slots 0 to 5 0 to 1 GTMU GSM transmissi on and timing and manageme nt unit GTMU 0 to 7 0 to 1 Slot 6 0 to 1 WMPT WCDMA main processing and transmissi on unit WMPT 0 to 7 0 to 1 Slot 6 or 7 0 to 2 LMPT LTE main processing and transmissi on unit LMPT 0 to 7 0 to 1 Slot 6 or 7 0 to 2 UMPT Universal main processing and transmissi on unit UMPT 0 to 7 0 to 1 Slot 6 or 7 0 to 2 SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 15
  • 20. Board Name Full Name Logical Name Cabinet Number Subrack Number Slot Number Quantity FAN FAN module FAN 0 to 7 0 to 1 Slot 16 1 UPEU Universal power and environme nt interface unit UPEU 0 to 7 0 to 1 Slot 18 or 19 1 to 2 UEIU Universal environme nt interface unit UEIU 0 to 7 0 to 1 Slot 18 or 19 0 to 1 UCIU Universal cascaded interface unit UCIU 0 to 7 0 to 1 Slots 0 to 7 0 to 1 UBRI Universal baseband radio interface unit UBRI 0 to 7 0 to 1 Slot 0 to 3 0 to 2 NOTE BBU board in a BTS supports automatic or manual configuration. If a BBU board supports automatic configuration, the configuration of the board automatically takes effect when the configuration of the cabinet housing the board takes effect. If a BBU board supports manual configuration, the configuration of the board takes effect only after the board is manually configured. In a BBU of a BTS, the GTMU, FAN, and UPEU support automatic configuration, whereas other boards require manual configuration. All boards installed in a BBU must be configured. For more details about the BBU board configuration, see BBU Hardware Description. 2.4 Typical Cabinet and Subrack Configurations for Series Base Stations The configuration rules in this section apply to GBTSs, eGBTSs, NodeBs, eNodeBs, and co- MPT base stations. In multimode base stations, the configuration rules for cabinets, subracks, and common boards in a BBU subrack are as follows: SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 16
  • 21. l The primary mode in a multimode base station is listed in descending order of priority: GSM, UMTS, and LTE. l All cabinets and the following subracks must be configured in primary mode: BBU, primary mode-dedicated RF, PMU, EMU, TCU, CCU, and FMU. Only BBU subracks containing the main control boards for secondary modes, secondary mode-dedicated RF subracks, and cabinets housing these subracks need to be configured in secondary modes. l Cabinets and subracks configured in both primary and secondary modes must have consistent cabinet and subrack numbers. Otherwise, parameter configuration conflict alarms will be generated. l In a BBU subrack, the UPEU, UEIU, and FAN can be configured in two modes, the UCIU and UTRPc can be configured only in one mode, and the USCU can be configured in either one mode or two modes. Table 2-11 lists the typical subrack configuration for series base stations. Table 2-11 Typical subrack configuration for series base stations Base Station Model Pow er Inpu t Hardwa re Cabinet Type Type and Quantit y of the Cabinet to Be Configu red Cabi net Num ber Recom mende d Subrac k Type Su bra ck Nu mb er Remarks BTS390 0 -48 V DC BTS 1 BTS 0 RFU 4 None FMU 11 EMU/ EMUA 40 BBU390 0 0 +24 V DC/ 220 V AC/ 110 V AC BTS 1 to 2 BTS s 0 to 1 RFU 4 If there are two BTS cabinets, BBU is configured in cabinet 0. It is recommended that the two cabinets be numbered 0 and 1. The BBU manages the two cabinets. Each cabinet is configured with one PMU. A +24 V DC cabinet does FMU 11 BBU390 0 0 EMU/ EMUA 40 SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 17
  • 22. Base Station Model Pow er Inpu t Hardwa re Cabinet Type Type and Quantit y of the Cabinet to Be Configu red Cabi net Num ber Recom mende d Subrac k Type Su bra ck Nu mb er Remarks PMU 7 not require any PMU. BTS390 0 220 V AC BTS _SRAN 1 to 2 BTS _SRANs 0 to 1 RFU 4 BBU is configured in cabinet 0. It is recommended that the two cabinets be numbered 0 and 1. The BBU manages the two cabinets. FMU 11 BBU390 0 0 EMU/ EMUA 40 PMU 7 BTS390 0 -48 V DC BTS _SRAN 1 to 2 BTS _SRANs 0 to 1 RFU 4 BBU is configured in cabinet 0. It is recommended that the two cabinets be numbered 0 and 1. The BBU manages the two cabinets. FMU 11 BBU390 0 0 EMU/ EMUA 40 BTS390 0L -48 V DC BTS L BTS L 0 RFU 4 and 5 In the BTSL cabinet, the lower RFU subrack is numbered 4, and the upper RFU subrack is numbered 5. The lower FMU subrack is numbered 11, and the upper FMU FMU 11 and 12 EMU/ EMUA 40 GATM0 50 GATM1 51 SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 18
  • 23. Base Station Model Pow er Inpu t Hardwa re Cabinet Type Type and Quantit y of the Cabinet to Be Configu red Cabi net Num ber Recom mende d Subrac k Type Su bra ck Nu mb er Remarks BBU390 0 subrack is numbered 12. 0 BTS390 0A 220 V AC APM30H 1 to 3 APM30s 0,5,6 TCU 8 As a management cabinet, APM30 manages devices in multiple cabinets. BBU390 0 0 PMU 7 EMU/ EMUA 40 It is configured in No.0 APM30. GATM0 50 GATM1 51 RFC 1 to 3 RFCs 1 to 3 RFU 4 None FMU 11 TMC11H 0 to 1 TMC 7 or 8 (1) TCU 8 IBBS200 D/ IBBS200 T 0 to 6 BBCs 9 to 14 TCU 8 Devices in BBC cabinets are managed by APM30. l No.0 APM30 manages No.9 and No.10 BBCs. l No.5 APM30 manages No.11 and No.12 BBCs. l No.6 APM30 manages No.13 and No.14 BBCs. BTS390 0A -48 V DC TMC11H 1 TMC 0 TCU 8 None BBU390 0 0 SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 19
  • 24. Base Station Model Pow er Inpu t Hardwa re Cabinet Type Type and Quantit y of the Cabinet to Be Configu red Cabi net Num ber Recom mende d Subrac k Type Su bra ck Nu mb er Remarks RFC 1 to 3 RFCs 1 to 3 RFU 4 None FMU 11 BTS390 0A 220 V AC BTS AE_SRA N 1 to 2 BTS AE_SRA Ns 0 to 1 TCU 8 None RFU 4 BBU390 0 0 PMU 7 FMU 11 EMU/ EMUA 40 IBBS200 D/ IBBS200 T or IBBS700 D/ IBBS700 T 0 to 4 BBCs 9 to 12 TCU 8 Devices in BBCs are managed by BTSAE_SR AN. l If BTSAE_ SRAN 0 requires two battery cabinets, BBCs 9 and 10 are configured for it. l If BTSAE_ SRAN 1 requires two battery cabinets, BBCs 11 and 12 are configured for it. DBS390 0 110 V/ Virtual 0 to 1 Virtual 0 BBU390 0 0 None SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 20
  • 25. Base Station Model Pow er Inpu t Hardwa re Cabinet Type Type and Quantit y of the Cabinet to Be Configu red Cabi net Num ber Recom mende d Subrac k Type Su bra ck Nu mb er Remarks 220 V AC APM30/ APM30H 1 to 3 APM30s 0,5,6 TCU 8 As a management cabinet, APM30 manages devices in multiple cabinets. BBU390 0 0 PMU 7 None TMC/ TMC11H 0 to 1 TMC 7 or 8 (1) TCU 8 None BBU390 0 0 BBU is optional and needs to be configured only when it resides in a TMC cabinet. OMB 0 to 1 OMB 0 TCU 8 OMB cabinets are configured independently of other types of cabinets. BBU390 0 0 PMU 7 IBBS200 D/ IBBS200 T 0 to 6 BBCs 9 to 14 TCU 8 Devices in BBC cabinets are managed by APM30. l No.0 APM30 manages No.9 and No.10 BBCs. l No.5 APM30 manages No.11 and No.12 BBCs. l No.6 APM30 manages No.13 and No.14 BBCs. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 21
  • 26. Base Station Model Pow er Inpu t Hardwa re Cabinet Type Type and Quantit y of the Cabinet to Be Configu red Cabi net Num ber Recom mende d Subrac k Type Su bra ck Nu mb er Remarks TP A 0 to 4 TP As 0 PMU 7 None CCU 15 TCU 8 EMU 40 BBU390 0 0 -48 V DC TMC/ TMC11H 1 TMC 0 TCU 8 In a triple-mode co-cabinet scenario, two TMC cabinets are required to house two BBUs. BBU390 0 0 OMB 1 OMB 0 TCU 8 None BBU390 0 0 +24 V DC APM30/ APM30H 1 to 2 APM30s 0 TCU 8 In a triple-mode co-cabinet scenario, two APM30 cabinets are required to house two BBUs. BBU390 0 0 BTS390 0AL 220 V AC BTS AL 1 to 2 BTS ALs 0 to 1 BBU390 0 0 None BBU390 0 1 PMU 7 TCU 8 CCU 15 FMU 11 EMU 40 SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 22
  • 27. Base Station Model Pow er Inpu t Hardwa re Cabinet Type Type and Quantit y of the Cabinet to Be Configu red Cabi net Num ber Recom mende d Subrac k Type Su bra ck Nu mb er Remarks RFU 4 TMC11H 0 to 1 TMC 0 TCU 8 IBBS700 D/ IBBS700 T 1 to 2 BBCs 9 to 10 CCU 15 TCU 8 BTS390 0C 110 V/ 220 V AC OMB 1 OMB 0 TCU 8 None BBU390 0 0 PMU 7 -48 V DC OMB 1 OMB 0 BBU390 0 0 TCU 8 NOTE The recommended cabinet number for a transmission cabinet configured with a BBU is 7. If conditions do not allow, configure the transmission cabinet as cabinet 8. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 2 Overview Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 23
  • 28. 3Related Features N/A SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 3 Related Features Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 24
  • 29. 4Impact on the Network N/A SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 4 Impact on the Network Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 25
  • 30. 5Engineering Guidelines 5.1 Information to Be Collected Before feature deployment, confirm information about cabinets, subrack, and BBU boards. 5.2 Feature Deployment 5.2.1 Deployment Requirements Cabinets, subracks, and BBU boards have been installed properly. 5.2.2 Network Planning N/A 5.2.3 Data Preparation l Scenario 1: Adding Cabinets l Scenario 2: Adding Subracks l Scenario 3: Adding BBU Boards Scenario 1: Adding Cabinets Table 5-1 and Table 5-2 describe the parameters for adding cabinets. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 26
  • 31. Table 5-1 Parameters for adding cabinets to GBTSs Parameter Name Parameter ID Setting Description Source Index Type IDTYPE Set this parameter to BYNAME(By Name) or BYID(By Index) based on the site requirements. Network plan BTS Index BTSID This parameter uniquely identifies a base station under a BSC. Network plan BTS Name BTSNAME This parameter uniquely identifies a base station under a BSC. Network plan Cabinet No CN GUI Value Range:0 to 62 It is recommended that the cabinet number start from 0. Network plan Is Support SingleRAN Mode SRANMODE This parameter indicates whether the SingleRAN base station supports normalized data configuration. Set this parameter based on the site requirements. Network plan Cabinet type TYPE l APM30 l TMC l BBC l PS l OMB l RFC-6 l BTS l BTSL l BTSAL l VIRTUAL l TPA Network plan SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 27
  • 32. Parameter Name Parameter ID Setting Description Source Cabinet Description CABINETDESC This parameter gives the description of the cabinet, including functions, location, and other information. Network plan SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 28
  • 33. Parameter Name Parameter ID Setting Description Source Is Master TMU Configured ISMAINCABINET This parameter can be specified only when the base station supports normalized data configuration. This parameter indicates whether an added cabinet is a basic cabinet. l If this parameter is set to NO, the cabinet is an extension cabinet. l If this parameter is set to YES, the cabinet to be added is an extension cabinet. l If the cabinet to be added is the first one and this parameter is set to DEFAULT, the cabinet is a basic cabinet and the cabinet number must be 0. l If there is a basic cabinet, set this parameter to DEFAULT when adding a new cabinet. The newly added cabinet is an extension cabinet. l If cabinet 0 is not a basic cabinet, you must set this parameter to NO when adding cabinet 0 to ensure that Network plan SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 29
  • 34. Parameter Name Parameter ID Setting Description Source cabinet 0 is an extension cabinet. The default value is DEFAULT. NOTE A cabinet with a BBU is defined as a basic cabinet, and a cabinet without a BBU is defined as an extension cabinet. Master TMU Subrack No. MAINCABINETSR N This parameter can be specified only when the base station supports normalized data configuration. This parameter specifies the number of the subrack where the master TMU resides. Network plan Table 5-2 Parameters for adding cabinets to eGBTSs, NodeBs, eNodeBs, or Co-MPT base stations Parameter Name Parameter ID Setting Description Source Cabinet No CN The cabinet number starts from 0. Network plan SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 30
  • 35. Parameter Name Parameter ID Setting Description Source Cabinet type TYPE l APM30 l TMC l BBC l PS l OMB l RFC l BTS l BTSL l VIRTUAL l BTSAL l TPA l BTS_SRAN l BTSAE_SR AN l BTSII_SRA N Network plan Cabinet description DESC This parameter gives the description of the cabinet, including functions, location, and other information. Network plan Scenario 2: Adding Subracks Subracks can be added to eGBTSs, NodeBs, eNodeBs, and Co-MPT base stations, but not to GBTSs. Table 5-3 describes the parameters for adding subracks to eGBTSs, NodeBs, eNodeBs, or Co-MPT base stations. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 31
  • 36. Table 5-3 Parameters for adding subracks to eGBTSs, NodeBs, eNodeBs, or Co-MPT base stations Parameter Name Parameter ID Setting Description Source Cabinet No. CN This parameter specifies the number of the cabinet where the subrack is configured. Set this parameter based on the cabinet number in use. Network plan Subrack No. SRN This parameter is set according to the subrack in use. Subracks 0 and 1 can be BBU subracks, and subracks 4 and 5 can be RFU subracks. Network plan Subrack type TYPE This parameter is set according to the subrack in use. Subrack types are as follows: l BBU subrack l RFU subrack Network plan Subrack description DESC This parameter gives the description of the subrack, including functions, location, and other information. Network plan Scenario 3: Adding BBU Boards Table 5-4 and Table 5-5 describe the parameters for adding BBU boards. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 32
  • 37. Table 5-4 Parameters for adding BBU boards to GBTSs Parameter Name Parameter ID Setting Description Source Index Type IDTYPE Set this parameter to BYNAME(By Name) or BYID(By Index) based on the site requirements. Network plan BTS Index BTSID This parameter uniquely identifies a base station under a BSC. Network plan BTS Name BTSNAME This parameter uniquely identifies a base station under a BSC. Network plan Cabinet No. CN The cabinet number starts from 0. Network plan Subrack No. SRN Value range: 0, 1 Single-mode: subrack 0 Multi-mode: If subrack 0 has been occupied, use subrack 1. Otherwise, use subrack 0. Network plan Slot No. SN Value range: 0 to 7, 16, 18, 19 Network plan Board Type BT This parameter indicates the type of the newly added board. Set this parameter based on the site requirements. Value range: PWC, UPEU, UEIU, USCU, UBRI, FAN, UTRP, UCIU Network plan SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 33
  • 38. Parameter Name Parameter ID Setting Description Source Subboard Type SBT This parameter indicates the subboard type. Value range: UIEB, UTRPc Network plan Table 5-5 Parameters for adding BBU boards to eGBTSs, NodeBs, eNodeBs, or Co-MPT base stations Paramet er Name Paramet er ID Setting Description Sourc e Cabinet No. CN The cabinet number starts from 0. Netwo rk plan Subrack No. SRN Value range: 0, 1 Single-mode: subrack 0 Multi-mode: If subrack 0 has been occupied, use subrack 1. Otherwise, use subrack 0. Netwo rk plan Slot No. SN Value range: 0 to 7, 16, 18, 19 Netwo rk plan Board type BT This parameter indicates the logical board type. Set this parameter according to the board in use. Value range: UMPT, WMPT, LMPT, UCIU, GTMU, UTRP, WBBP, LBBP, UBRI, USCU, UBBP, FAN, UPEU, UEIU Netwo rk plan SubBoar d Type SBT This parameter indicates the subboard type in the UTRP. Set this parameter according to the subboard used in the UTRP. Value range: UAEC, UIEC, UUAS, UQEC, UEOC, UIEB, UTRPc Netwo rk plan Work Mode WM This parameter indicates the working mode of the baseband processing board. Set this parameter to FDD, HYBRID, TDD, TDD_ENHANCE, TDD_8T8R, TDD_TL, or TDD_HIGHWAY based on the site requirements. Netwo rk plan Hardware Capacity Enhance HCE This parameter determines whether the baseband processing board provides basic or maximum processing capability. The recommended value is FULL. Netwo rk plan SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 34
  • 39. NOTE If you want to expand capacity by adding WBBPs or increase downlink CE resources by adding boards to the downlink resource group, set Resource Allocate Rule to CAPAFIRST(Capacity First Rule). 5.2.4 Feature Activation/Initial Configuration Adding Cabinets and Subracks l Configuring a single base station on the GUI Follow the instructions in the following reference documents and refer to section 6.2.3 "Data Preparation" to complete the initial configuration. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating GBTSs > Creating a Single GBTS > Configuring GBTS Device Data > Cabinet and BBU data > Procedure. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating a NodeB > Creating a Single NodeB > Configuring NodeB Device Data > Cabinet and BBU data > Procedure. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating an eNodeB > Creating a Single eNodeB > Configuring eNodeB Device Data > Cabinet and BBU data > Procedure. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations >Creating Co-MPT Base Stations > Creating a Single Co-MPT Base Station > Configuring Device Data > Cabinet and BBU data > Procedure. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations >Creating Separate-MPT Multimode Base Stations > Creating a Single Separate-MPT Multimode Base Station > Configuring Device Data > Cabinet and BBU data > Procedure. l Configuring base stations in batches You can save the data of a single base station (including data of the BBU subrack) as a template. Then, configure multiple base stations in batches by importing this template. Follow the instructions in the following reference documents and refer to section 6.2.3 "Data Preparation" to complete the initial configuration. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating GBTSs > Creating GBTSs in Batches. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating a NodeB > Creating NodeBs in Batches. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating an eNodeB > Creating eNodeBs in Batches. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 35
  • 40. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating Co-MPT Base Stations >Creating Co-MPT Base Stations in Batches. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating Separate-MPT Multimode Base Stations > Creating Separate-MPT Multimode Base Stations in Batches. l Configuring a single base station using MML commands – Run the ADD BTSCABINET command to add a GBTS cabinet. – Run the ADD CABINET command to add an eGBTS, NodeB, or eNodeB cabinet. Run the ADD SUBRACK command to add an eGBTS, NodeB, or eNodeB subrack. Adding BBU Boards l Configuring a single base station on the GUI Follow the instructions in the following reference documents and refer to section 6.2.3 "Data Preparation" to complete the initial configuration. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating GBTSs > Creating a Single GBTS > Configuring GBTS Device Data > Cabinet and BBU data > Procedure. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating a NodeB > Creating a Single NodeB > Configuring NodeB Device Data > Cabinet and BBU data > Procedure. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating an eNodeB > Creating a Single eNodeB > Configuring eNodeB Device Data > Cabinet and BBU data > Procedure. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations >Creating Co-MPT Base Stations > Creating a Single Co-MPT Base Station > Configuring Device Data > Cabinet and BBU data > Procedure. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations >Creating Separate-MPT Multimode Base Stations > Creating a Single Separate-MPT Multimode Base Station > Configuring Device Data > Cabinet and BBU data > Procedure. l Configuring base stations in batches You can save the data of a single base station (including data of the BBU subrack) as a template. Then, configure multiple base stations in batches by importing this template. Follow the instructions in the following reference documents and refer to section 6.2.3 "Data Preparation" to complete the initial configuration. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 36
  • 41. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating GBTSs > Creating GBTSs in Batches. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating a NodeB > Creating NodeBs in Batches. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating an eNodeB > Creating eNodeBs in Batches. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating Co-MPT Base Stations >Creating Co-MPT Base Stations in Batches. – For details, see Series Base Station Initial Configuration Guide and navigate in the following sequence: Series Base Station Initial Configuration (Base on the CME) > Creating Base Stations > Creating Separate-MPT Multimode Base Stations > Creating Separate-MPT Multimode Base Stations in Batches. l Configuring a single base station using MML commands – Run the ADD BTSBRD command to add boards to a GBTS cabinet. – Run the ADD BRD command to add boards to an eGBTS, NodeB, or eNodeB cabinet. 5.2.5 Activation Observation Checking GBTS Cabinets, Subracks, and BBU Boards Run the DSP BTSBRD command to check whether the boards are available. Checking Cabinets, Subracks, and BBU Boards in eGBTSs, NodeBs, eNodeBs, or Co-MPT Base Stations Run the DSP BRD command to check whether the boards are available. 5.3 Feature Reconfiguration 5.3.1 Modifying Cabinet Configuration For GBTS cabinets, you can only modify the cabinet description. For eGBTS, NodeB, eNodeB, and Co-MPT base station cabinets, you can modify the cabinet description and change the cabinet type in specific scenarios. Modifying GBTS Cabinet Configuration Run the MOD BTSCABINET command to modify the parameters described in Table 5-6. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 37
  • 42. Table 5-6 Parameters to be modified Parameter Name Parameter ID Setting Description Source Index Type IDTYPE This parameter cannot be modified. Network plan BTS Index BTSID This parameter cannot be modified. Network plan BTS Name BTSNAME This parameter cannot be modified. Network plan Cabinet No CN This parameter cannot be modified. Network plan Cabinet Description CABINETDESC This parameter gives the description of the cabinet. Network plan Modifying Cabinet Configuration for eGBTSs, NodeBs, eNodeBs, or Co-MPT Base Stations Run the MOD CABINET command to modify the parameters described in Table 5-7. NOTE l You can only change the virtual cabinet to other types of cabinets. l If a cabinet to be modified contains non-BBU subracks, you cannot change the cabinet type. l If a cabinet to be modified contains only BBU subracks and can house additional BBU subracks, you can change the cabinet type. Otherwise, you cannot change the cabinet type. l If a cabinet to be modified contains no subracks, you can change the cabinet type to any type. Table 5-7 Parameters to be modified Parameter Name Parameter ID Setting Description Source Cabinet No CN This parameter cannot be modified. Network plan Cabinet description DESC This parameter gives the description of the cabinet, including functions, location, and other information. Network plan SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 38
  • 43. Parameter Name Parameter ID Setting Description Source Cabinet type TYPE Set this parameter according to the onsite cabinet type. If a cabinet type is not included in the defined cabinet types, set this parameter to VIRTUAL. Cabinet types are as follows: l APM30 l TMC l BBC l PS l OMB l RFC l BTS l BTSL l BTSAL l TPA l BTS_SRAN l BTSAE_SR AN l BTSII_SRA N l VIRTUAL Network plan 5.3.2 Modifying Subrack Configuration You can modify the subrack configuration of eGBTSs, NodeBs, eNodeBs, or Co-MPT base stations but cannot modify the subrack configuration of GBTSs. Run the MOD SUBRACK command to modify the parameters related to eGBTSs, NodeBs, eNodeBs, or Co-MPT base stations, as described in Table 5-8. Table 5-8 Parameters to be modified Parameter Name Parameter ID Setting Description Source Cabinet No. CN This parameter cannot be modified. Network plan SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 39
  • 44. Parameter Name Parameter ID Setting Description Source Subrack No. SRN This parameter cannot be modified. Network plan Subrack description DESC This parameter gives the description of the subrack, including functions, location, and other information. Network plan 5.3.3 Modifying BBU Board Configuration You can modify the baseband board and UTRP configurations of eGBTSs, NodeBs, eNodeBs, and co-MPT base stations but cannot modify BBU board configuration of GBTSs. Modifying the Baseband Board Configuration Run the MOD BBP command to modify the baseband board configuration. Pay attention to the following when modifying the LBBP configuration: l Before modifying the working mode of the LBBP for the existing activated cell, ensure that the eNodeB supports the modified working mode and that there are sufficient idle resources (see the cell specifications of the LBBP). Otherwise, the cell cannot be activated. l LBBPs in FDD mode support 1T1R, 1T2R, 2T2R, 2T4R, and 4T4R FDD cells. l LBBPs in TDD mode support 1T1R, 2T2R, 4T4R, and 8T8R TDD cells. l If an RRU chain/ring in load sharing mode is configured on LBBPs and the chain head and tail belong to different LBBPs, the working mode of the LBBP cannot be modified. l If the RRU/RFU cannot set up links or work at the maximum line rate after the LBBP is blocked/unblocked, run the STR CPRILBRNEG command to manually initiate negotiation. l To block or unblock the LBBP, change the value of the ADMSTATE parameter in the BLK BRD or UBL BRD command, respectively. After the board is blocked, ALM- Board Blocked will be reported and the board will not provide services. After the board is unblocked, the alarm will be cleared. Table 5-9 describes the parameters to be modified. Table 5-9 Parameters to be modified Parameter Name Parameter ID Setting Description Source Cabinet No. CN This parameter setting cannot be modified. Network plan SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 40
  • 45. Parameter Name Parameter ID Setting Description Source Subrack No. SRN This parameter setting cannot be modified. Network plan Slot No. SN This parameter setting cannot be modified. Network plan Work Mode WM This parameter indicates the working mode of the baseband board. Set this parameter to FDD, HYBRID, TDD, TDD_ENHANCE, TDD_8T8R, TDD_TL, or TDD_HIGHWAY based on the site requirements. Network plan Hardware Capacity Enhance HCE This parameter determines whether the baseband board provides basic or maximum processing capability. The recommended value is FULL. Network plan CPRI Extension CPRIEX This parameter indicates the CPRI extension switch of a baseband board. The transmission capability of a fiber optic cable is improved when this parameter is set to ON. Only LBBPd supports this parameter. Network plan Modifying the Work Mode or Hardware Capacity Enhance parameter interrupts services on the WBBP/LBBP. After the WBBP/LBBP resets, services on this board return to normal. If an SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 41
  • 46. RRU chain is configured on any of optical ports 3 through 5 of an LBBP, the CPRIEX parameter cannot be set to ON. Modifying UTRP Configuration of eGBTSs, NodeBs, eNodeBs, or Co-MPT Base Stations Run the MOD UTRP command to modify the UTRP configuration of eGBTSs, NodeBs, eNodeBs, or co-MPT base stations. Table 5-10 describes the related parameters. Table 5-10 Parameters to be modified Parameter Name Parameter ID Setting Description Source Cabinet No. CN The setting of this parameter cannot be modified. Network plan Subrack No. SRN The setting of this parameter cannot be modified. Network plan Slot No. SN The setting of this parameter cannot be modified. Network plan SubType SUBTYPE This parameter indicates the subboard type in the UTRP. Set this parameter based on the site requirements. Value range: UAEC, UIEC, UUAS, UQEC, UEOC, UIEB, UTRPc Network plan 5.3.4 Deleting BBU Boards When a board or module is not required, you can delete it. Only the configured board or module cannot be deleted. Deleting GBTS BBU Boards Run the RMV BTSBRD command to delete a BBU board from a BTS. Table 5-11 describes the related parameters. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 42
  • 47. Table 5-11 Parameters for deleting GBTS BBU boards Parameter Name Parameter ID Setting Description Source Index Type IDTYPE Set this parameter to BYNAME(By Name) or BYID(By Index) based on the site requirements. Network plan BTS Index BTSID This parameter uniquely identifies a base station under a BSC. Network plan BTS Name BTSNAME This parameter uniquely identifies a base station under a BSC. Network plan Cabinet No. CN It is recommended that the cabinet number start from 0. Network plan Subrack No. SRN Value range: 0, 1 Single-mode: subrack 0 Multi-mode: If subrack 0 has been occupied, use subrack 1. Otherwise, use subrack 0. Network plan Slot No. SN Value range: 0 to 7, 16, 18, 19 Network plan Deleting BBU Boards from eGBTSs, NodeBs, eNodeBs, or Co-MPT Base Stations Run the RMV BRD command to delete a BBU board from eGBTSs, NodeBs, eNodeBs, or Co- MPT base stations. Table 5-12 describes the related parameters. l Deleting a board causes a board reset. l After a board is deleted, services on the board are interrupted. l If a WBBP/LBBP has been configured with an RRU chain, it cannot be deleted. If you want to delete the WBBP/LBBP, delete the RRU chain configuration first and then delete the WBBP/LBBP. l If a board has been configured with a subboard, the subboard is deleted when the board is deleted. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 43
  • 48. Table 5-12 Parameters for deleting BBU boards from eGBTSs, NodeBs, eNodeBs, or Co-MPT base stations Parameter Name Parameter ID Setting Description Source Cabinet No. CN It is recommended that the cabinet number start from 0. Network plan Subrack No. SRN Value range: 0, 1 Single-mode: subrack 0 Multi-mode: If subrack 0 has been occupied, use subrack 1. Otherwise, use subrack 0. Network plan Slot No. SN Value range: 0 to 7, 16, 18, 19 Network plan 5.4 BBU Board Maintenance 5.4.1 Resetting BBU Boards When resetting BBU boards, pay attention to the following points: l In dual-mode scenarios, you can reset common devices at the peer end. Resetting common devices at the peer end interrupts services on the common devices. l In multi-mode base stations, resetting the GTMU, UMPT, WMPT, LMPT, and UTRP may interrupt services on base stations of other modes. Resetting GBTS BBU Boards Run the RST BTSBRD command to reset a specified BTS BBU board. Reset using this command consists of soft reset and power-off reset, which are specified by corresponding parameters. If power-off reset is selected for a multi-mode base station, boards in the BBUs of other modes are reset. The boards that support soft reset are as follows: Ordinary boards The boards that support power-off reset are as follows: l GTMU l UBRI SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 44
  • 49. Resetting BBU Boards in Soft Reset Mode in GBTSs, NodeBs, eNodeBs, or Co-MPT Base Stations If a board has a fault that cannot be rectified, soft reset is required. Soft reset takes a relatively short time. Run the RST BRD command to perform a soft reset. NOTE USCU, FAN, UPEU, and UEIU do not support soft reset. After the RST BRD command is executed, the BBU Board Maintenance Link Failure alarm and the Board Startup event alarm are generated. Run the DSP BRD command to check the values of AvailabilityStatus and OpState. If the value of AvailabilityStatus is Normal and the value of OpState is Enabled, the board has started up properly and the fault has been rectified. Resetting NodeB/eNodeB BBU Boards in Power-off Reset Mode If soft reset fails, power-off reset is required. Power-off reset takes a relatively long time. Run the RST BRDPWROFF command to perform a power-off reset. NOTE USCU, FAN, UPEU, and UEIU do not support power-off reset. After the RST BRDPWROFF command is executed, the BBU Board Maintenance Link Failure alarm and the Board Startup event alarm are generated. Run the DSP BRD command to check the values of AvailabilityStatus and OpState. If the value of AvailabilityStatus is Normal and the value of OpState is Enabled, the board has started up properly and the fault has been rectified. 5.4.2 Querying BBU Board Information Querying GBTS Board Information Run the DSP BTSBRD command to query the running status of a GBTS board. Querying Board Information in eGBTSs, NodeBs, eNodeBs, or Co-MPT Base Stations Step 1 Run the DSP BRD command to query the running status of a board in eGBTSs, NodeBs, eNodeBs, or Co-MPT base stations. Step 2 Run the DSP BRDMFRINFO command to query the manufacturing information about a board in eGBTSs, NodeBs, eNodeBs, or Co-MPT base stations. ----End SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 5 Engineering Guidelines Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 45
  • 50. 6Parameters Table 6-1 UMTS: Parameter description Parameter ID NE MML Command Feature ID Feature Name Description CN BTS ADD CABINET DSP CABMFRINFO LST CABINET MOD CABINET RMV CABINET None None Meaning:Indi- cates the cabinet number. GUI Value Range:0~62 Unit:None Actual Value Range:0~62 Default Value:None SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 46
  • 51. Parameter ID NE MML Command Feature ID Feature Name Description TYPE BTS ADD CABINET MOD CABINET LST CABINET None None Meaning:Type of a cabinet. This parameter is set to VIRTUAL when the type of a cabinet is not within the value range of this parameter. GUI Value Range:APM30 (APM30), TMC (TMC), BBC (BBC), APM100 (APM100), APM200 (APM200), PS (PS), OMB (OMB), RFC (RFC), BTS (BTS), BTSL (BTSL), BTSAL (BTSAL), VIRTUAL (Virtual Cabinet), BTSD (BTSD), BTS_SRA N (BTS_SRA N), BTSAE_S RAN (BTSAE_S RAN), BTSII_SR AN (BTSII_SR AN), TPA (TPA), SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 47
  • 52. Parameter ID NE MML Command Feature ID Feature Name Description TPA (TPA), ILC29(ILC29) Unit:None Actual Value Range:APM30, TMC, BBC, APM100, APM200, PS, OMB, RFC, BTS, BTSL, BTSAL, VIRTUAL, BTSD, BTS_SRA N, BTSAE_S RAN, BTSII_SR AN, TPA, TPA, ILC29 Default Value:VIRTUA L(Virtual Cabinet) SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 48
  • 53. Parameter ID NE MML Command Feature ID Feature Name Description DESC BTS ADD CABINET MOD CABINET LST CABINET None None Meaning:Indi- cates a brief description of the cabinet, which can be the function, location, and some other information of the cabinet. GUI Value Range:0~79 characters Unit:None Actual Value Range:0~79 characters Default Value:NULL (empty string) CN BTS ADD SUBRACK LST SUBRACK MOD SUBRACK RMV SUBRACK None None Meaning:Indi- cates the cabinet number of the subrack. GUI Value Range:0~62 Unit:None Actual Value Range:0~62 Default Value:None SRN BTS ADD SUBRACK LST SUBRACK MOD SUBRACK RMV SUBRACK None None Meaning:Indi- cates the number of the subrack. GUI Value Range:0~254 Unit:None Actual Value Range:0~254 Default Value:None SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 49
  • 54. Parameter ID NE MML Command Feature ID Feature Name Description TYPE BTS ADD SUBRACK LST SUBRACK None None Meaning:Indi- cates the type of the subrack. GUI Value Range:BBU390 0(BBU Subrack), RFU (RFU Subrack), PMU(PMU Subrack), TCU (TCU Subrack), FMU(FMU Subrack), RRU (RRU Subrack), RHUB(RHUB Subrack), PRRU (PRRU Subrack), EMU (EMU Subrack), GRU(GRU Subrack), BBU-1U (BBU-1U Subrack), GATM(GATM Subrack), PICO (PICO Subrack), CCU(CCU Subrack), AAS (AAS Subrack), UNKNOW (Unknow Subrack) Unit:None Actual Value Range:BBU390 0, RFU, PMU, TCU, FMU, RRU, RHUB, PRRU, EMU, GRU, BBU-1U, GATM, PICO, CCU, AAS, UNKNOW SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 50
  • 55. Parameter ID NE MML Command Feature ID Feature Name Description Default Value:None DESC BTS ADD SUBRACK MOD SUBRACK LST SUBRACK None None Meaning:Indi- cates a brief description of the subrack, which can be the function, location, and some other information of the subrack. GUI Value Range:0~79 characters Unit:None Actual Value Range:0~79 characters Default Value:NULL (empty string) SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 51
  • 56. Parameter ID NE MML Command Feature ID Feature Name Description WM BTS ADD BRD MOD BBP LST BBP None None Meaning:Indi- cates the working mode of the baseband processing board. There are seven working modes: FDD, TDD, HYBRID, TDD_ENHAN CE, TDD_8T8R, TDD_TL and FDD_ATG. The Frequency Division Duplex (FDD) mode carries the traditional voice and data services. TDD is short for Time Division Duplex. The HYBRID mode is a combination of FDD and IMB modes. In Integrated Mobile Broadcasting (IMB) mode, the baseband processing board carries the mobile TV services. The value TDD_ENHAN CE indicates the TDD mode integrated with the BeamForming (BF) function. The BF function provides the data SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 52
  • 57. Parameter ID NE MML Command Feature ID Feature Name Description transmission service in transmission modes 7 and 8 defined in protocols. For details, see 3GPP TS 36.213. In TDD_8T8R mode, the baseband processing board supports TD-LTE single- mode 8T8R. In addition, the baseband processing board supports the BF function and CPRI specifications are applied between the BBU and RRU. In TDD_TL mode, the baseband processing board supports the TD- LTE&TDS- CDMA dual mode and the TD-LTE single mode. In addition, the baseband processing board supports 8T8R BF and 2T2R Multiple- Input Multiple- Output (MIMO) and CMCC TD- LTE IR specifications SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 53
  • 58. Parameter ID NE MML Command Feature ID Feature Name Description are applied between the BBU and RRU. In FDD_ATG mode, the baseband processing board supports communication between Air and Ground. The FDD_ATG mode applies only to communication between air and ground. GUI Value Range:FDD (Frequency Division Duplex), TDD (Time Division Duplex), HYBRID (HYBRID), TDD_ENHAN CE(Support TDD BF), TDD_8T8R (TDD_8T8R), TDD_TL (TDD_TL), FDD_ATG (AirToGround) Unit:None Actual Value Range:FDD, TDD, HYBRID, TDD_ENHAN CE, TDD_8T8R, TDD_TL, FDD_ATG Default Value:FDD (Frequency SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 54
  • 59. Parameter ID NE MML Command Feature ID Feature Name Description Division Duplex) HCE BTS ADD BRD MOD BBP LST BBP None None Meaning:Indi- cates the hardware capabilities of a baseband processing board. This parameter is controlled by a license control item and is customized for a specific operator. For other operators, this parameter is invalid and the hardware capabilities of a baseband processing board are consistent with the hardware specifications of this board. GUI Value Range:NORMA L(NORMAL), FULL(FULL) Unit:None Actual Value Range:NORMA L, FULL Default Value:FULL (FULL) SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 55
  • 60. Parameter ID NE MML Command Feature ID Feature Name Description CN BTS DSP BBPTC LST BBP MOD BBP None None Meaning:Indi- cates the cabinet number of the baseband processing board. GUI Value Range:0~7 Unit:None Actual Value Range:0~7 Default Value:0 SRN BTS DSP BBPTC LST BBP MOD BBP None None Meaning:Indi- cates the subrack number of the baseband processing board. GUI Value Range:0~1 Unit:None Actual Value Range:0~1 Default Value:0 SN BTS DSP BBPTC LST BBP MOD BBP None None Meaning:Indi- cates the slot number of the baseband processing board. GUI Value Range:0~5 Unit:None Actual Value Range:0~5 Default Value:None SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 56
  • 61. Parameter ID NE MML Command Feature ID Feature Name Description CPRIEX BTS MOD BBP LST BBP None None Meaning:Indi- cates the CPRI extension switch of a BBP. The transmission capability of a fiber optic cable is improved when this parameter is set to ON. Only LBBPd supports this parameter.The BBP is reset after the parameter is modified. GUI Value Range:OFF (Off), ON(On) Unit:None Actual Value Range:OFF, ON Default Value:OFF(Off) CN BTS DSP BRDRAT LST UTRP MOD UTRP SET BRDRAT None None Meaning:Indi- cates the cabinet number of the extension transmission board. GUI Value Range:0~7 Unit:None Actual Value Range:0~7 Default Value:None SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 57
  • 62. Parameter ID NE MML Command Feature ID Feature Name Description SRN BTS DSP BRDRAT LST UTRP MOD UTRP SET BRDRAT None None Meaning:Indi- cates the subrack number of the extension transmission board. GUI Value Range:0~1 Unit:None Actual Value Range:0~1 Default Value:None SN BTS DSP BRDRAT LST UTRP MOD UTRP SET BRDRAT None None Meaning:Indi- cates the slot number of the extension transmission board. GUI Value Range:0~6 Unit:None Actual Value Range:0~6 Default Value:None SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 58
  • 63. Parameter ID NE MML Command Feature ID Feature Name Description SUBTYPE BTS MOD UTRP LST UTRP None None Meaning:Indi- cates the type of the sub-board. GUI Value Range:NULL (NULL), UAEC (UAEC), UIEC (UIEC), UUAS (UUAS), UQEC (UQEC), UEOC (UEOC), UIEB (UIEB), UTRPc (UTRPc) Unit:None Actual Value Range:NULL, UAEC, UIEC, UUAS, UQEC, UEOC, UIEB, UTRPc Default Value:None SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 6 Parameters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 59
  • 64. 7Counters There are no specific counters associated with this feature. SingleRAN Base Station Cabinets and Subracks (Including the BBU Subrack) Configuration Feature Parameter Description 7 Counters Issue 03 (-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 60

Rectangular Connectors | Series List

Request for Connectors manual


Connectors manual download - request transmission completed. The URL link will be sent (from ) to your chosen address very soon. Please wait for the to arrive in your inbox.
If you do not receive a , it is most likely due to an error in the return address you have provided above.
Or, usually the problem is a spam filter somewhere along the path and not a lack of response.

Rdekono are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Series Name

Application

Required

Country/Region

Required

State (Chinese)

Required

State(USA)

Required

State(Canada)

Required

Company Name

Required Download by competitors is not allowed.

Department Name

Title

Name

Required First Name Last Name

Required

Business Address

Required

Business Address (re-enter)

Required

● Do you wish to receive our direct marketing ? (including new product release etc.)
Please note that you can receive our direct marketing only if you agree to provide us with your information. [please select your preference]

  • Yes, I wish
  • No, I DON’T wish

Product Name

For more 19 Inch Subrack China Manufacturerinformation, please contact us. We will provide professional answers.

Application

Required

Country/Region

Required

State(USA)

Required

State(Canada)

Required

State (Chinese)

Required

Company Name

Required

Department Name

Title

Name

Required

Required

Business Address

Required

Business Address (re-enter)

Required

● Do you wish to receive our direct marketing ? (including new product release etc.)
Please note that you can receive our direct marketing only if you agree to provide us with your information. [please select your preference]

Required

Terms of Use

When requesting, receiving, and/or downloading Connectors manual from JAE, you are agreeing to comply with and be bound by the following terms and conditions of use. The terms of use are subject to change at any time without notice.

  1. Connectors manual provided by JAE may be deleted or revised at any time without notice.
  2. Connectors manual provided by JAE is meant solely for the use of the original individual the data was requested by.
  3. Connectors manual provided by JAE is copyrighted by JAE and is not to be altered or shared with outside parties.
  4. Downloaded Connectors manual is to be used only for dimension confirmations and reference purposes only.
  5. You acknowledge that such information and materials may contain unintended inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
  6. Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
  7. This website contains material which is owned by or licensed to JAE. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
  8. Unauthorized use of JAE ’s Connectors manual may give rise to a claim for damages and/or be a criminal offence.
  9. The content of the pages and data provided on this website is for your general information and use only. It is subject to change without notice.
  10. JAE does not share your contact information with any outside parties. Your provided contact information may be used for marketing and business operation purposes by JAE. However, you can request to not be included in marketing e-mails, calls, mails, etc. by Unsubscribe Form.
  11. Your provided contact information may be used for marketing and business operation purposes by JAE. However, you can request to not be included in marketing e-mails, calls, mails, etc. by Unsubscribe Form.
  12. Personal information provided by you shall be used and handled at JAE in strict accordance with the following Privacy Policy:

    PRIVACY POLICY
    This is an important notice regarding your privacy and the way in which Japan Aviation Electronics Industry, Limited (referred to as “we”, “our”, “us” or “JAE” in this policy) collects and makes use of your personal data. We want to be open and transparent with you, and therefore encourage you to contact us if you have any questions about this policy or the ways in which we use your personal data.

    We take our privacy responsibilities seriously and are committed to protecting and respecting your privacy.

    This policy sets out the basis on which any personal data we collect from you, or that you provide to us, will be processed by us. Please read the following carefully to understand our views and practices regarding your personal data and how we will treat it.

    For the purpose of applicable privacy legislation, the data controller is Japan Aviation Electronics Industry, Limited of 21-1, Dogenzaka 1-chome, Shibuya-ku, Tokyo 150-, Japan.

    Questions regarding this policy should be directed to . Any questions about the operation of this policy or any concerns that the policy has not been followed should be referred in the first instance to .

    1. 1.What information do we hold about you?
      We may collect, store and use personal data about you (referred to throughout this privacy policy as personal information):
      1. personal information you provide to us via our website, for example, by using this “Request for Connectors manual” form.
      2. Any personal information you provide to us during your interactions with us.
      3. Information gathered by cookies used on our website. Our website uses cookies to distinguish you from other users of our website. This helps us to provide you with a good experience when you browse and also allows us to improve the way our website works. For detailed information on the cookies we use and the purposes for which we use them please refer to our Cookie Policy (https://www.jae.com/en/cookies-law/ ).
      4. Information provided to us by third party service providers we work with, for example, analytics providers.
    2. 2.How will we use your personal information and what is the legal ground we rely on for doing so?
      We will only use your personal information when the law allows us to. When we use your personal information, we must have a legal ground for doing so. The following are (amongst others) the legal grounds by which we can use your personal information:
      1. Where you have provided us with your consent for us to do so;
      2. Where we need to perform the contract we have entered into with you or to take steps to enter into a contract with you;
      3. Where we need to comply with a legal obligation to which we are subject;
      4. Where it is in pursuit of our legitimate interests (or those of a third party) and your interests and fundamental rights do not override those interests.

        More specifically, we will use your personal information in the following circumstances:

      5. Your contact details to provide you with information on our products and services. This may include technical information and/or marketing information - in pursuit of our legitimate interests in keeping you informed about our products, services and business updates.
      6. Dealing with your enquiry made via this “Request for Connectors manual” forms on our website - in pursuit of our legitimate interest to ensure your enquiry is dealt with promptly and efficiently.
      7. Your contact details to facilitate business between your company and ours - in pursuit of our legitimate interest of daily business with your company.
      8. To administer our website and for internal operations, including troubleshooting, data analysis, testing, research, statistical and survey purposes - in pursuit of our legitimate interests (to better understand how people interact with our website and solve any issues it may have).
      9. To transfer to third party service providers - in pursuit of our legitimate interests (in outsourcing for effectiveness and efficiency).
      10. To contact you if we wish to use your information for a purpose not set out in this policy - to comply with a legal obligation.
      11. Your contact details to provide you with information on our products and services. This may include marketing information - where you are a consumer and have provided us with your consent for us to do so.
    3. 3.What happens if there is a change of purpose?
      We will only use your personal information for the purposes for which we collected it, unless we reasonably consider that we need to use it for another reason and that reason is compatible with the original purpose. If we need to use your personal information for an unrelated purpose, we will notify you and we will explain the legal basis which allows us to do so.

    4. 4.Which type of third parties might we share your personal information with?
      We require third parties to respect the security of your personal information and to treat it in accordance with the law. For example, where we instruct third party service providers, we carry out due diligence on those providers to ensure they treat your personal information as seriously as we do.
      We may share your personal information with the following types of third parties:
      1. Technical support providers, for example, assisting with our website.
      2. Professional advisers such as lawyers, accountants and business analysts.
      3. Providers which help us collate and organise information effectively and securely.
      4. Third party software hosting companies which provide us with software solutions.
      5. Providers which host our servers in their data centres in UK, USA and Taiwan.
      6. Cloud storage providers in order to back-up our data.
      7. Our subsidiaries in order to respond to your requirement effectively.
    5. 5. Data retention How long will we use your personal information for?
      We will only retain your personal information for as long as necessary to fulfil the purposes we collected it for.
      We assess the appropriate retention period for different information based on the size, volume, nature and sensitivity of that information, the potential risk of harm to you from unauthorised use or disclosure of that information, the purposes for which we are using that information, applicable legal requirements for holding that information, and whether we can achieve those purpose(s) through other means.

      Business contacts
      1. The period we keep your personal information depends on a number of circumstances. For example:
      2. Where we have collected your personal information during the course of your and our organisations doing business, we will keep your personal information for as long as this business continues, or for as long as we have a commercial interest in holding your personal information, for example, with a view to doing business in the future.
      3. Where you use our website and one of our cookies are activated, that cookie will operate for the duration set out in our Cookie Policy.
    6. 6. Where we store your personal data
      Electronic versions of your personal information are stored on our servers in Japan. We may also transfer personal data to our servers in UK, USA and Taiwan. We have put in place appropriate safeguards between our Japan and UK entities to provide for the lawful transfer of personal data outside of the European Economic Area.
      Where we use third party service providers to assist us, your personal information may also be stored in accordance with their practices and procedures. We require third parties to respect your personal information and to treat it in accordance with the law.

    7. 7. Rights of access, correction, erasure, restriction, and transfer Your rights in connection with your personal information
      Under certain circumstances, by law you have the right to:
      1. Request access to your personal information (known as a “data subject access request”). This enables you to receive a copy of the personal information we hold about you and to check that we are lawfully processing it.
      2. Request correction of the personal information that we hold about you. This enables you to have any incomplete or inaccurate information we hold about you corrected.
      3. Request the erasure of your personal information. This enables you to ask us to delete or remove personal information when there is no good reason for us continuing to process it. You also have the right to ask us to stop processing personal information where we are relying on a legitimate interest and there is something about your particular situation which makes you want to object to processing on this ground.
      4. Request the restriction of processing of your personal information. This enables you to ask us to suspend the processing of personal information about you, for example if you want us to establish its accuracy or the reason for processing it.
      5. Request the transfer of your personal information to another party.
      If you want to review, verify, correct or request erasure of your personal information, object to the processing of your personal data, or request that we transfer a copy of your personal information to another party, please contact .
    8. 8. No fee usually required
      You will not have to pay a fee to access your personal information (or to exercise any of the other rights). However, we may charge a reasonable fee if your request for access is clearly unfounded or excessive. Alternatively, we may refuse to comply with the request in such circumstances.

    9. 9. What we may need from you
      We may need to request specific information from you to help us confirm your identity and ensure your right to access any personal information (or to exercise any of your other rights). This is a security measure to ensure that personal information is not disclosed to another person who has no right to receive it.

    10. 10. Right to withdraw consent
      In the limited circumstances where you may have provided your consent to the collection, processing and transfer of your personal information for a specific purpose, you have the right to withdraw your consent for that specific processing at any time. To withdraw your consent, please contact .
      Where we are providing you with marketing information, you can also change your marketing preferences by using the unsubscribe button at the bottom of our marketing e-mails sent to you.
      Once we have received notification that you have withdrawn your consent, we will no longer process your personal information for the purpose or purposes you originally agreed to, unless we have another legitimate basis for doing so.

    11. 11. What happens if you fail to provide personal information?
      If you fail to provide certain information when requested, we may not be able to perform the contract we have entered into with you (such as providing you with our products or services), or we may be prevented from complying with our legal obligations (such as to ensure the health and safety of visitors to our premises).

    12. 12. Right to complain
      You have the right to make a complaint if you wish to do so. The organisation with oversight of our processing is the Information Commissioner’s Office, which can be contacted in writing at Information Commissioner’s Office, Wycliffe House, Water Lane, Wilmslow, Cheshire, SK9 5AF, by ( 123 ) or by ( ).

    13. 13. Changes to this privacy notice
      We may change, modify, add or remove portions of this policy at any time, and any changes will become effective immediately.
      Any changes we make to our privacy policy will be posted on this page and, where appropriate, notified to you.

Please tick the box to show your agreement with the above terms of use before “Submit”.

If you want to learn more, please visit our website Subrack Kit for Backplane.