Iridium Sputtering Targets
Purity: 99.9%;
Circular: Diameter <= 14 inch, Thickness >= 1mm;
Block: Length <= 32 inch, Width <= 12 inch, Thickness >= 1mm.
With competitive price and timely delivery, Acetron sincerely hope to be your supplier and partner.
Bonding is recommended for these materials. Many materials have characteristics that are not amenable to sputtering, such as brittleness and low thermal conductivity. This material may require a special ramp up and ramp down procedures. This process may not be necessary for other materials. Targets that have low thermal conductivity are susceptible to thermal shock.
We can provide Iridium Sputtering Targets (Ir) of other shapes or sizes according to your needs. Please contact us if there is a need.
We can also provide Iridium rods, Iridium flakes, Iridium particles, Iridium blocks, Iridium powder, etc.
Cutting-edge Quality: Utilizing state-of-the-art manufacturing technologies, we are committed to delivering high-quality Nickel sputtering targets. Our rigorous testing processes ensure that our targets not only meet but exceed industry standards.
Customer Satisfaction and Trust: With years of dedicated effort, we have earned the trust of countless customers, including being the chosen supplier for Stanford University. Our professional team is dedicated to providing top-notch services, building long-term relationships based on satisfaction and trust.
Global Impact and Accessibility: Serving clients globally, our efficient distribution network ensures prompt deliveries. Wherever you are, accessing our high-quality Nickel sputtering targets is seamless. We provide comprehensive support and guidance throughout the purchasing process, ensuring a seamless experience for our global clientele.
Expert Technical Team: With over a decade of industry experience, our technical team can provide tailored advice based on your specific needs.
Nickel sputtering targets are raw materials used in Physical Vapor Deposition (PVD) processes to create thin films. Nickel is a silvery-white lustrous metal with a slight golden tinge. It is widely used in the production of sponge nickel and decorative coatings. Nickel can form a decorative coating on ceramic surfaces or a solder layer in circuit device fabrication when evaporated in a vacuum. It is often sputtered to create layers in magnetic storage media, fuel cells, and sensors. AEM offers nickel sputtering targets with high-purity and fine grain. Under the same conditions, the coating film is more uniform than similar products, and the coating area is increased by 10% to 20%.
Density: Nickel exhibits a density of approximately 8.91 grams per cubic centimeter, contributing to its overall mass.
Are you interested in learning more about Rotary Metal Sputtering Targets? Contact us today to secure an expert consultation!
Melting Point: The melting point of nickel is relatively high, standing at around 1,455 degrees Celsius, making it suitable for high-temperature applications.
Hardness: Nickel possesses a notable hardness, contributing to its durability and resistance to wear.
Conductivity: As a metal, nickel demonstrates excellent electrical conductivity, making it applicable in various electronic and conductive applications.
Malleability: Nickel is malleable, allowing it to be shaped and molded without breaking, enhancing its versatility in manufacturing processes.
Corrosion Resistance: Nickel is known for its corrosion-resistant properties, making it suitable for applications where exposure to corrosive environments is a concern.
Purity: High-purity nickel targets are often used in sputtering applications, ensuring minimal impurities for precise thin-film deposition.
Compatibility: Nickel is compatible with a range of materials, contributing to its widespread use in various industrial processes.
Oxidation resistance: Nickel has antioxidant properties. A dense oxide film will form on the surface of nickel in humid air at room temperature, preventing the metal from continuing to oxidize, which is beneficial to long-term use.
These characteristics make nickel sputtering targets well-suited for applications in thin-film deposition, electronics, and surface coating processes.
AEM is a distinguished manufacturer and reliable source of high quality Nickel sputtering targets. Our comprehensive services ensure precision at every stage from initial selection to timely delivery, making AEM the first choice for quality Nickel sputtering targets requirements. Additionally, in most cases we have the flexibility to create custom samples based on your exact specifications. This ensures you get the exact Nickel sputtering target you need for your specific project. Trust AEM to meet your Nickel sputtering target needs with excellence and customization.
Want more information on alloy sputtering target? Feel free to contact us.