Safety should always be a top priority in any construction project. Manual pulling of heavy wire poses considerable risk of injury to workers and the integrity of the wire.
LONG ZHUO contains other products and information you need, so please check it out.
The iTOOLco Safe Pull™ running line tensioner allows load limits to be set and audible alarms to sound to ensure the cable is being pulled at a safe tension level. Electrical contractors can also track every pull on a mobile device with the Safe Pull RLT application. The convenient GPS capability ensures correct information is provided about the corresponding job site and notifications about tracked loads are sent wherever they need to go via and stored on the device.
Mitigate hazards and minimize accidents for a safer work environment.
Pulling wire not only takes a large amount of time, it’s also labor-intensive. Industrial-strength wire can weigh over one pound per foot, making it a hefty task to pull by hand. The physical strain and potential safety hazards associated with manual pulling are considerable.
One ergonomic tool-handling solution to consider is the iTOOLco Tool Crane™ which operates in tight spaces to position heavy tools for easy work completion, significantly lowering the tool’s required working weight and diminishing worker fatigue. The Tool Crane features 360˚ motion, multiple mounting options, and countless reach possibilities.
By alleviating the physical burden, these tools empower electrical contractors to focus on precision and quality, leaving behind the days of back-breaking labor.
Electrical wire pulling tools are essential for an electrician to complete their tool arsenal.
For some electricians, these could very well be the tools you use more than all others combined.
Whatever type of wiring situation you come across, there is a very good chance that you will need to pull a wire or two with wire pulling tools. This is part of the job. Whether you are working on a complicated repair in tight quarters or a new building with plenty of room to work, the tools you use can make the job a nightmare or a dream.
The biggest challenge is often selecting the right tools for the job. This is where your training comes in. When you know which tools work best in which situations, the job will be safer and go much smoother.
To pull wire through the conduit, you first thread, or fish, the tape through the conduit or pipe. Once it is through, you attach the wires you need to the end of the tape and reel them through the conduit.
Draw tape electrical wiring pulling tools usually come in fifty or one hundred foot lengths. It is housed in a plastic box, similar to many recoiling extension cords, complete with a handy carrying handle. You use the draw tape the same way you would use a measuring tape.
This tool is indispensable for an electrician. Whether you are pulling electrical wire or low voltage cable, this tool can be a lifesaver. Features you should look for in good electrical tools are non-conductive materials such as fiberglass, and an adjustable nose pin that can be easily adapted to your needs. When you look for a draw tape, make sure to get one long enough for various types of jobs. Get one with a stable, solid reel that is not likely to bind.
When working with longer conduit or heavier wires, attach a rope to the end of the tape. Although the tape is a tough and flexible electrical wire pulling tool, it is not a good idea to pull an overly-heavy load.
If you want to learn more, please visit our website Measuring Tools Supplier.
When attaching the wires to the end of the tape, strip off the outer insulation first. Thread the bare wire through the end and cover the entire connection with electrical tape.
This may seem like a lot of extra work, but losing your wire halfway through the conduit will be much worse. Lubricating the wire with special electrical lubricant will also make it easier to slip in the wire.
To pull the wire through, have one person stand by the box feeding the wire into the conduit, while you pull at the other end with the electrical wire pulling tool.
Make sure the person feeding the wire does not allow the wires to become tangled. Ideally, he will lubricate the wires with one hand while feeding them into the conduit and pull the wire off the reel with the other.
Pull the wires slowly, about two to three feet at a time. Check periodically with the person on the other end to ensure you are pulling at a good rate for him. Pulling too quickly can kink the wires or possibly catch your helper’s hand.
Space your pulls to ensure your helper has enough time to lubricate the wires and pull off enough new wire to keep feeding the conduit.
To prevent injury and kinking wires, simply tell your helper to tap the conduit when he is ready for another pull.
Wire pulling rods are shorter than draw tape electrical wire pulling tools and are not used with a reel. When longer lengths are needed, you may splice several rods together.
Many wire pulling rods have a special glowing feature. This makes them easily visible in the ceiling, under the floor and inside walls. When you are doing light work or wiring short distances, a non-conductive wire pulling rod may well become your staple wire puller.
These rods are typically three to six feet long. You can get various connection heads, enabling you to accomplish a variety of jobs, such as running cable television wires, lines, thermostat wiring and more.
The most important part of pulling wires is to keep the wires kink-free, and to not lose the wire inside the conduit. Of course, if you do lose the wire, simply pull it back out and start over. This is very time-consuming, so make sure the wire is attached securely in the first place.
For very small jobs, you may be able to simply thread the wires through without any help. But, these instances are rare. In most cases, you will have several feet of wire to pull through conduit.
Just threading the wire through without the help of the right electrical wiring pulling tools will most certainly result in kinked or stuck wires.