To coat or not to coat? Rotating equipment owners know protective coatings safeguard against fouling and corrosion, but are they absolutely necessary for every application? Which conditions and/or process media should be considered for coatings? Will coating impact the performance of the equipment positively or negatively? Which coating should be used for which process media? Will coating critical components reduce the need for rotating equipment repairs and downtime? These are the questions rotating equipment owners ask when deciding whether to invest in this practice. The main reason owners look at using coatings is to prolong service life, decrease operation and maintenance costs, and increase equipment efficiency.
Are you interested in learning more about special coating? Contact us today to secure an expert consultation!
Equipment reliability and longevity are the two biggest concerns for industrial facilities and undeniably so, as capital equipment is your largest investment. Depending on the size of the equipment and its usage, the cost of the coating and labor can be paid back in less than a year by an increase in efficiency of just a mere two percent. Other secondary benefits of using coatings are decreased electricity usage and increased performance. Rotating equipment is subjected to harsh conditions with long operational times and abrasive or corrosive process materials. Coatings help protect against the damage caused by wear-prone applications. They have been designed to be wear resistant, reduce friction, protect against caustic/acidic materials and cleaning agents, and increase line efficiencies. Coatings come in two categories – organic and inorganic. Organic coatings range from thermoset and thermoplastic polymers to elastomers. They are the most commonly used and cost effective mode of protection. Inorganic coatings are non-carbon based compounds such as glass, metals, silicones, and ceramics. Choosing one type over the other involves understanding the ease of coating application and whether the service condition is mechanical, thermal, or chemical. Inorganic coatings perform highly in abrasive and corrosive applications and last long, but tend to be more expensive than organic coatings. Check with your equipment manufacturer for coating recommendations.
Sometimes coatings are not the best solution. Coatings work well for equipment that is stationary and that will not experience high volumes of turbulence or erosion from abrasive particles. Coatings are great short-term solutions in your anti-corrosion strategy. Once a coating has been applied, it immediately begins a degradation process that will require touch-ups, maintenance, or even a complete reapplication. Coatings can also inhibit pump performance by causing obstacles or closing off passes and ports. When these applications begin to throttle your equipment, it moves the machinery farther away from its original design point, thus reducing efficiency and service life. In high velocity services, coatings will be quickly removed and will be less cost-effective in the long run because of constant reapplications.
If organic and inorganic coatings are not right for your rotating equipment’s service condition, then it may be time to check out structural composite components. There are numerous advantages to composites. First and foremost, they are corrosion and chemical resistant. With metallic equipment that has been coated, process media is able to penetrate the coating, getting underneath it, and corroding the metal components. Composites are a solid piece, so coating is not required, thus eliminating corrosion issues. They are also incredibly strong and lightweight. Lightweight materials are easier to move and equate to significant energy savings. Their high strength makes them durable and resistant to pitting and damage. Composites also have excellent elasticity. When metal components are under stress, they will dent and yield. Composites will spring back into place after the stressor is removed. Because they are non-metallic, composites are also non-conductive, making them safer in high-voltage operations.
Composites are an excellent choice for rotating equipment owners, but it requires investing in new parts and equipment. There are advantages and disadvantages to using coatings on your rotating equipment. You will have to look at several factors to determine whether using a coating is your best solution or whether to invest in structural composite components and equipment instead. Though coatings are a more short-term solution, they are a more cost-effective investment (up front) and easy to apply. If you are looking for a more permanent, long-term solution, check out structural composites. Either way, you will see immediate benefits of increased efficiency, reduced energy usage, prolonged service life, and a reduction in the need for rotating equipment repair.
Anticorrosion Coatings Pump Up Efficiency. Industrial Equipment News.
What Are the Advantages of Powder Coating?
Since its development in the 1940s, powder coating has become an industry standard for durable, long-lasting, attractive protection for metal and other surfaces, making them both look better and last longer. With numerous compatible materials and applications, powder coatings offer a variety of advantages over other techniques, including:
Versatility
Powder coatings can be applied by spraying or fluidized bed techniques, using a wide variety of plastic resins such as polyester, epoxy, polyolefin, nylon, vinyl, and Halar, taking advantage of each material's specific features.
Durability
If you are looking for more details, kindly visit Sand Storage Hopper manufacturer.
Powder coating is one of the toughest surface treatments available, strongly bonding the coating to the substrate by electrostatic charge. Depending on materials and environment, powder coatings usually last up to 20 years or more.
Multifunctional
Beyond offering long-lasting protection, powder coating materials add such benefits as abrasion resistance, chemical resistance, electrical resistance, reduced or increased friction, easy cleaning, impact resistance, or vibration deadening.
Coating Thickness & Quality
Smoother, thicker coatings can be achieved with powder coating than by dipping or other plastic coating processes, and generally with more uniform thickness and appearance.
Environmentally Friendly
A downside of working with many plastics is found with the volatile organic compounds (VOCs) in the accompanying solvents and primers needed to apply them. Because powder coating works with heat and electromagnetic attraction, these toxic substances can be avoided. Powder coating also produces less waste overall as most of the powder is attracted to the substrate, and any overspray waste that does occur can generally be reused and is non-toxic.
Attractive
Powder coatings can match any color of the rainbow, and can include special effects from matte finishes and wrinkled or sandy textures to translucent, glittery, or veined looks. Many of these special effects could not be achieved with other coating techniques.
Speedy
Offering a generally shorter curing time than dipping techniques, powder coating can shorten production time.
At Precision Dip Coating, we have decades of experience in powder coating and other plastic coating techniques. Contact us today to take advantage of our coating expertise and many value-added services.
The company is the world’s best Lost foam casting sand treatment equipment supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.