Adding specialized gun grips to your custom gun can improve your shooting experience and performance. Whether you’re adding grip sleeves to your carry pistol or a foregrip to an AR-15, the intent is the same. Better handling for better shooting. Before you start bolting all kinds of contraptions onto your gun or spending your hard-earned money, it’s important to understand how grip affects your shooting, custom grip benefits, and how to choose the right gun grips for your shooting needs.
The gun grips are the point at which you connect to your firearm. They provide the leverage to aim, squeeze the trigger, and control recoil. They offer a firm gripping surface that sits surely in your hand. Grips also need to be comfortable enough that you can maintain your hand position through extended aiming or manage the recoil generated by the small explosion inside the chamber without injuring yourself or losing your handhold. They may not always get a lot of attention, but when a grip fails or doesn’t do its job well, your shooting suffers.
Too often, shooters simply accept bad gun grips as “just one of those things”, whether they’re the stock OEM slabs or custom upgrades that look the part but just don’t feel right. You don’t have to. Back in the day, most gun stores had the grip display–which looked like a spinning showcase had come down with revolver warts–to showcase a dozen or so wood variations and a few Pachmayr options. You have an almost limitless set of gun grip solutions for modern handguns, including established favorites like fresh plates or grip sleeves, as well as modern 3D-printed grips, frames, foregrips, and more–all in a variety of colors, patterns, materials, textures, and configurations.
There’s no reason to settle for bad grips anymore.
While not every set of gun grips offers every benefit, there are a few common upsides shooters are looking for when they pick out their new furniture. You should start by considering what you hope new grips will do for your shooting or where your current setup may be letting you down.
One of the top reasons to add custom gun grips or foregrips is that they can make handling your gun easier. From designs that offer better purchase when your hands are wet, slick, or slippery to thinner grip sizes for small hands and grip sleeves that add a little more bulk for big ol’ bear paws, you can make sure you have the handhold you need. This doesn’t just affect accuracy and precision. A loss of control during live fire on the range or in real life can be dangerous and come with deadly consequences.
Aside from the handling, when a grip fits your hand just right, it feels better. This makes it more comfortable to hold in a ready position or aimed. Your hand finds the proper shooting grip more readily on the draw from a holster, improving your speed-on-target and efficiency. This might be due to molding that conforms better to your hand, a lighter weight, or surface texturing that offers fewer sharp points that dig into your skin.
Because custom gun grips give you better handling, you also have more control for better aiming and precision, the follow-up shot placement after you manage recoil and come back on target. The right grip plates or sleeves make it easier for you to mitigate recoil and ride through the muzzle flip to return to your aiming point. Foregrips and custom stocks do the same for rifles and carbines, making even rapid-fire tactical engagements more manageable.
We may be all about function-first around here, but there’s nothing wrong with functional gun upgrades looking cool as all get out. In fact, it’s a bonus. Gun grips are available to suit every taste, coordinate with every color, and emphasize every curve or angle on your custom gun. Why not take advantage of cool points while improving your shooting?
When it comes to choosing your custom gun grips, it helps to take stock of your shooting needs and preferences. There are plenty of options on the market, so every gun owner can find the perfect solution for their firearms.
Get the grip surfaces you need for better shooting. We offer custom gun grips, stocks, sleeves, and fore grips that give you the quality and design features you want with friendlier pricing for your bank account. Order your gun grips online from JSD Supply.
Usually the template used to make the grips comes from a tracing of the original grips. Here we're using the rubber grips that were on the gun to make a tracing to use on our wood.
If you no longer have the grips at all, trace the frame and estimate how much of the upper section will be covered by wood and allow the grips to either match the width of the frame or add extra space for things like contour grooves (finger grooves) or artistic encasement.
Next we need to take the trace that we have and place it on the wood itself. Half inch wood is fine here, unless we want really oversized grips.
Most hardwoods are perfect for pistol grips and what you use really comes down to personal taste. There are many types that have various grain patterns and exotic colors even.
Some suggestions are:
There are many, many more - too many to list! But for this project, we are using some colorful oak wood to make our grips out of.
Oak was selected for several reasons, the first and foremost that we had a scrap piece that allowed us to fit a pair of grip traces onto perfectly. Secondly, oak is a very strong hardwood and it can take bumps, taps and hits without denting easily - perfect for an old rough and rugged revolver!
(It also has the added benefit of having a very tight but flowing grain pattern that often produces lovely results without being too "exotic" looking.)
Remember that we have two grips to make, the left and right half and that these will be mirrored pieces or opposites. Note in the above picture, a simple piece of scrap oak wood was able to be re-purposed for this project and the two halves just barely fit.
The butt end of the grips are being placed directly together like you see to create a mirrored grain pattern throughout the pair. We could also just as easily flip one of the pieces to create a flowing grain pattern between the two. There are many tricks and techniques to give interesting effects in wood grain and I recommend reviewing some of them to get a good idea of what you'd like to see in your final results.
Goto Zechen Fitness to know more.
To separate the two pieces, place one piece gently into a vice and give the other piece a light tap with a wooden or soft-head mallet. This should break the glue bonding easily and give you two identical pieces of wood, ready to be mated to the frame.
Frame mating is a slow process and takes patience and focus. Trace the location of the frame onto the wood and begin removing the wood a little bit at a time. Remember - it's always better to go back and remove a little more, than to take off a little too much and have to start all over again.
Pistol grips are all about precision and attention to detail.
Take care not to go out of bounds if you're encasing the metal (as shown with this grip, the bottom and front of the gun will be covered over with wood. The front has a very thin piece near the bottom that had to be carefully worked around so as to not damage it and go through the wood) and make sure you're not carving away too much wood.
For the next step we need to make sure the areas we've cut away are level and smooth. Flat sanding with a wood block (In this case, a paint stick was wrapped in sand paper to make a small wood block that would fit the contours of the grips) is preferred as this will give you the most level finish possible.
The grips must be measured for even depth (a digital caliper helps in this process but it can technically be done by hand and with just your eyes if you have a high attention to detail - these grips were put .300mm within tolerance before a digital caliper was used to zero out the variance) and then test fitted to the handgun.
It must be done repeatedly and slowly, so the gap (seen above) will slowly come together and you will have a very tight fitting, properly flush hand grip pair.
We are now at the end of fitting where we make sure that we have a 100% fit all around the gun, even and smooth, no gaps or seams anywhere.
After that, we begin the transformation from blank to rough grip, by rounding off the sharp corners and we begin to put curves and shapes into our grips.
A pilot hole must also be drilled to set a screw into the wood to allow the two grips to be pulled together tightly to the frame. CARE MUST BE TAKEN to make sure you're drilling through the hollow part of the gun frame and nowhere near the frame or any working parts! Failure to do so will cause damage to your firearm and may make it unsafe or incapable of firing!
We test fit the grips on the gun once more to make sure the escutcheon and screw function properly and then remove them from the gun. We use a piece of wood the same thickness as the gun to brace the grips and join them together by the screw set.
Once that's done, we can now shape and sand the grips without any risk to the gun's finish. Note, this is a perfect time to place thumb grooves for left, right or both handedness, as well as any other contour features you'd like.
Attention to detail is critical at this point because we're nearly finished! If it doesn't "feel" right, it's not. Mark the location that's lumpy, too bulky or awkward and sand it smooth or make adjustments.
As an example, the grip sat far too low behind the trigger guard and was significantly raised by sanding down that section of the wood.
How it feels means everything at this stage - if it's not comfortable to hold, it's not going to be comfortable to shoot.
As an option, hand carving, checkering or grip grooves may be added to the grips at this time. Care must be taken not to damage any of the wood and detail sanding is required for more intricate carvings. Checkering may be kept a little rough, as the whole purpose is to add more grip to the handle's surface.
In this step we're going to turn the surface of the wood into a glass-like smoothness.
This is achieved in two ways. One, we're going to take a lightly damp cloth (very very lightly, it should be difficult to get the wood wet at all) and rub it all over the outside of the grips. This will make the wood grain "pop" up and rough sections will leap out at you when you run your fingers over it.
Sand them smooth and repeat. Continue until there are no more surprise pops from the grain.
Finally, rub the outside of the grips with 000 steel wool. This will do two things - one, it will smooth out the wood beyond 120 or even 200 grit sandpaper. Two, it will collect sawdust that is trapped in the wood, showing off the beautiful grain hidden underneath.