Our silica nanoparticles are produced via the condensation of silanes to form nanoparticles that consist of an amorphous network of silicon and oxygen via the Stöber method. The particles are monodispersed with narrow size distributions. The refractive index of silica is estimated at 1.43. The density of silica nanoparticles is approximately 2 g/cm3 and depends on the degree of condensation. Colloidal silica is amorphous or non-crystalline, meaning that the atoms do not have long-range order, similar to the atomic structure of bulk glass. As prepared, they are readily suspended in polar solvents such as water and ethanol. By binding different silanes to the nanoparticle surfaces, they can be rendered hydrophobic for suspension into non-polar matrices.
Click here to get more.
Spherical silica nanoparticles can be produced at large scale with sizes ranging from tens of nanometers to micrometers in diameter. By changing reaction conditions such as the concentration of reactants, the catalyst used, and the reaction temperature, the sizes of the particles can be easily tuned. For example, increasing the concentration of water and ammonia results in larger nanoparticles, whereas increasing the concentration of tetraethyl orthosilicate (TEOS) yields smaller particles.
The TEM images below illustrate that careful control over the growth conditions produces uniform particles of various sizes with low coefficients of variation (CV). In fact, silica particles are known for their low CVs and have even been suggested for use as size standards to aid in calibration of materials characterization tools.1
Dispersible in: ethanol, water, isopropyl alcohol (IPA), dimethyl sulfoxide (DMSO), ethylene glycol, dimethyl formamide (DMF)
Not readily dispersible in: non-polar organic solvents
Interested in silica compatibility that is not listed here? Read on to learn about silica surface chemistry and our custom synthesis capabilities.
Silica is known for its rich surface chemistry that can be easily functionalized with hundreds of silanes. Common silica surfaces include amino-, mercapto-, carboxy-, and aldehyde-terminated depending on the application of interest. At nanoComposix, we have extensive experience fabricating particles with custom sizes and surface chemistries, conjugating particles to a variety of proteins and antibodies, and incorporating fluorophores, quantum dots, or dyes within colloidal silica particles. For more information please visit our Custom Synthesis page or contact us.
NanoXact Silica Nanospheres are available with a negatively-charged bare (non-functionalized) silica surface and a positively charged amine-terminated surface. Non-functionalized (hydroxyl-terminated) silica is ideal for physadsorption of small molecules or for applications requiring high particle stability. Aminated silica is used for covalent binding to molecules such as dyes, proteins and antibodies.
Bare silica nanoparticles have very good colloidal stability in water and alcohols. The silica surface is very versatile and can be readily modified to attach specific functional groups. This can include creating hydrophobic, or fluorophilic, surfaces. The nanoporous structure of silica allows moderate molecular weight molecules, such as fluorophores or drug molecules, to be loaded into the silica shell.
The hydroxyl groups give silica colloids a large negative zeta potential at neutral and basic pH. Zeta potential measurements of 80 nm-diameter silica colloids as a function of pH show that the isoelectric point of silica nanoparticles is close to pH 2. This indicates that at pH > 2, the surfaces will be negatively charged and functionalized with Si-O– groups.
For help reading and interpreting the data above, check out our Zeta Potential Tutorials. To learn more about this type of surface chemistry, try out our Silica Surface module.
Amine-functionalized silica is useful for binding studies, conjugation with carboxyl-containing molecules through EDAC coupling, or binding to dyes and molecules with isothiocyanate (ITC) or amine-reactive esters. The amines at the colloid surface can be protonated at acidic pH to yield particles with a large positive zeta potential. Measurement of zeta potential versus pH for 120 nm amine-terminated silica particles indicates an isoelectric point near pH 7.5.
Based on the amount of reagent used during the surface functionalization step and the surface area available for the ligand to bind, we calculate a maximum of ~2.5 amine groups/nm2 at the particle surface. This is consistent with literature reports,2 which estimate approximately two amine groups/nm2. Depending on orientation, packing density, and other factors, only a portion of the amines may be accessible for conjugation. Further, in some cases there are also amine groups that are incorporated into the silica network below the particle surface, and which contribute to the zeta potential of the particle and can be detected using different characterization methods. Because they are embedded within the silica shell, however, these amines are not accessible for conjugation.
NanoComposix’s amine-functionalized silica is provided in ethanol in order to preserve the integrity of the amine functional groups on the surface, as silica has much higher solubility in water and under some solution conditions the silica network will partially dissolve, leading to a loss of some functional groups. While ethanol provides good material stability, it is also slightly basic with a pH of approximately ~7.0–7.5, which happens to be very close to the isoelectric point of the amine-functionalized silica. This can cause certain sizes of amine-functionalized silica to flocculate and fall out of solution because of the low surface charge present under these solution conditions. This phenomenon is separate from large diameter nanoparticles settling over time due to gravity. This can be reversed by dispersing the silica in a low pH acidified buffer, such as acetate at pH 5. Sizes > 50 nm can be centrifuged down and redispersed in a low pH buffer. Contact us for details.
Different commercial vendors report concentration using various methods. When researching which nanoparticles to purchase and use it is critical to be able to compare formulations from different suppliers. There are a number of different ways that the concentrations are reported. Here we provide tables converting our silica nanoparticle formulations into other commonly reported concentration units.
SizeSilica has low but non-negligible solubility in water. At pH values above 8 and below 3, the solubility of silica increases rapidly. In dilute concentration, silica can dissolve from particle surfaces until equilibrium is reached. This is especially noticeable for silica shells on metal nanoparticles. At low concentrations, silica shells can be removed completely in just a few hours. The rate of dissolution can be modified by exposure to aluminum chloride, heating, or reduced temperature. One the other hand, the slow silica dissolution can be advantageous, enabling dried silica to be deagglomerated by resuspending in a slightly basic solution.
The extent of silica nanoparticle porosity is highly tunable and can be carefully controlled during synthesis by varying the degree of condensation of hydroxide (–OH) groups through a process called olation. Porosity can also be controlled through hydrolysis and dissolution of siloxane bonds, heat treatment with sodium borohydride, and post-synthetic etching under basic conditions.3 Solid silica nanoparticles are only slightly porous relative to metal nanoparticles, whereas hollow and mesoporous silica nanoparticles have large internal pores that are often spacious enough to incorporate small molecules or even large biomolecules into the nanoparticle’s interior.
The figure above shows that each tetraethyl orthosilicate (TEOS) molecule in the silica network can couple to as many as four other silane molecules through oxygen atom bridges. However, during standard sol-gel growth and coating procedures, there are still many hydroxides present in the coating. These unbound –OH groups reduce the silica density and thus increase its porosity; more complete condensation can be driven by heating particles. This tunable porosity lends itself to ready fabrication of mesoporous silica and hollow porous silica nanostructures. Interestingly, silica can be hollowed even in juxtaposition with other materials for controlled formation of heterostructures and core-shell nanoparticles with porous silica engineered into different spatial regions of the particles.
Aluminosilicate refers to the class of materials in which aluminum atoms are substituted for some of the silicon atoms. Several aluminosilicate polymorphs exist in nature and can be made synthetically, and similar to silica, these materials are amorphous. Aluminosilicates are particularly well known for their strength at high temperatures, beyond that of other related glasses and on the order of properties typically associated with ceramics.
One very effective method for increasing the robustness of silica nanoparticles in water is to convert some portion of the incompletely condensed silica surface into aluminosilicate. This surface conversion significantly reduces the dissolution of silica and preserves its surface chemistry. Aluminosilicate can also be deposited as shells on the surfaces of different types of nanoparticle cores; for instance, magnetic nanoparticles to enhance their stability and/or facilitate their binding to DNA.
Nanoparticles with varying identities can also be attached to silica surfaces with a wide variety of biomedical and technological applications in mind. For instance, silica shelled gold nanoparticles can be studded with fluorescent quantum dots (QDs) on the surface. The fluorescence from the QDs can be used to track the particles for nanomedicinal applications.
Interested in these varieties? Learn more about our Custom Synthesis capabilities.
According to MRI, the global Hydrophobic Silica Market size in terms of revenue was valued at around USD XX.X billion in 2024 and is expected to reach a value of USD XX.X billion by 2031, growing at a CAGR of roughly XX.X% from 2024 to 2031. The global Hydrophobic Silica market is projected to grow at a significant growth rate due to several driving factors.
Hydrophobic Silica Market Overview:
Market Research Intellect projects a promising growth trajectory for the Hydrophobic Silica Market from 2024 to 2031. The market is set to witness robust expansion fueled by factors such as drivers. Technological advancements and innovation will be key drivers, leading to product differentiation and market diversification. Moreover, favorable regulatory initiatives and increasing consumer awareness will bolster market growth. Market Research Intellect forecasts a steady CAGR of X% during this period, signaling lucrative opportunities for industry participants. By embracing emerging trends and implementing effective strategies, companies can strengthen their competitive position and capitalize on the evolving market dynamics.
Request PDF Sample Copy of Report: (Including Full TOC, List of Tables & Figures, Chart) @ https://www.marketresearchintellect.com/download-sample/?rid=1020007&utm_source=Pulse&utm_medium=019
Hydrophobic Silica Market Dynamics:
Growth Drivers of Hydrophobic Silica Market:
Hydrophobic Silica Market Restraints
Get a Discount On The Purchase Of This Report @ https://www.marketresearchintellect.com/ask-for-discount/?rid=1020007&utm_source=Pulse&utm_medium=019
The following Key Segments Are Covered in Our Report
Hydrophobic Silica Market, By Type
Hydrophobic Silica Market, By Application
Major companies in Hydrophobic Silica Market are:
Global Hydrophobic Silica Market Regional Analysis
North America:
Europe:
Asia-Pacific:
Latin America:
Middle East and Africa:
Hebei Silicon Research Electronic Materials Co., L Product Page
Frequently Asked Questions (FAQ)
1. What are the present scale and future growth prospects of the Hydrophobic Silica Market?
Answer: The Hydrophobic Silica Market is anticipated to witness a compound annual growth rate (CAGR) of XX% from 2024 to 2031, transitioning from a valuation of USD XX Billion in 2024 to USD XX billion by 2031.
2. What is the current state of the Hydrophobic Silica market?
Answer: As of the latest data, the Hydrophobic Silica market is experiencing growth, stability, and challenges.
3. Who are the key players in the Hydrophobic Silica market?
Answer: Prominent players in the Hydrophobic Silica market include key companies, known for their notable characteristics or strengths.
4. What factors are driving the growth of the Hydrophobic Silica market?
Answer: The growth of the Hydrophobic Silica market can be attributed to factors such as key drivers technological advancements, increasing demand, and regulatory support.
5. Are there any challenges affecting the Hydrophobic Silica market?
Answer: The Hydrophobic Silica market's challenges include competition, regulatory hurdles, and economic factors.
6. How is the competitive landscape in the Hydrophobic Silica market?
Answer: The competitive landscape is characterized by the competitive dynamics – key players, market share, and strategies.
7. What are the key trends shaping the Hydrophobic Silica market?
Answer: Current trends in the Hydrophobic Silica market include significant technological innovations and changing consumer preferences.
For More Information or Query, Visit @ Global Hydrophobic Silica Market Size And Forecast
Table of Contents:
1. Introduction of the Hydrophobic Silica Market
2. Executive Summary
3. Research Methodology of Market Research Intellect
4. Hydrophobic Silica Market Outlook
5. Hydrophobic Silica Market, By Product
6. Hydrophobic Silica Market, By Application
7. Hydrophobic Silica Market, By Geography
8. Hydrophobic Silica Market Competitive Landscape
9. Company Profiles
10. Appendix
About Us: Market Research Intellect
Market Research Intellect is a leading Global Research and Consulting firm servicing over 5000+ global clients. We provide advanced analytical research solutions while offering information-enriched research studies. We also offer insights into strategic and growth analyses and data necessary to achieve corporate goals and critical revenue decisions.
Our 250 Analysts and SMEs offer a high level of expertise in data collection and governance using industrial techniques to collect and analyze data on more than 25,000 high-impact and niche markets. Our analysts are trained to combine modern data collection techniques, superior research methodology, expertise, and years of collective experience to produce informative and accurate research.
Our research spans a multitude of industries including Energy, Technology, Manufacturing and Construction, Chemicals and Materials, Food and Beverages, etc. Having serviced many Fortune 2000 organizations, we bring a rich and reliable experience that covers all kinds of research needs.
For inquiries, Contact Us at:
Mr. Edwyne Fernandes
Market Research Intellect
APAC: +61 485 860 968
EU: +44 788 886 6344
US: +1 743 222 5439
Contact us to discuss your requirements of hydrophobic silica. Our experienced sales team can help you identify the options that best suit your needs.