Subject to technical modifications.
For more information, please visit Shengmao.
Our machines, consumables and services meet the highest standards. This is promised not only by numerous certifications, but above all by our own claim: Excellence in Clipping. In this way, we guarantee you the reliability and dependability that you can expect for your production. We ship spare parts worldwide within the shortest possible time, quickly and without complications. If necessary, our technical service is on the spot via the fastest route.
Show more ... Show less ...One operator works on the clipper, who simultaneously serves the sausage filler. One or more workers are additionally involved in hanging the formed sausage sticks on the smoking frames (depending on the worker’s performance and the filler capacity).
The clipper is aggregated directly with the filler or with the attached grinder VP- and then the filler. The operator fills the clip and loop, installs the cog of the required diameter, puts on the measured section of the casing on the cog. The braking unit is installed on the cog, which allows adjusting the degree of casing overflow. Necessary turn-back of the cog during clipping is selected.
The end of the casing is threaded into the twisting unit. By pressing the twisting drive handle, the operator applies the first clip and loop on the beginning of the casing hose and the clip on the beginning of the next stick, then monitors and adjusts the degree of clip clamping, adjusts the degree of the casing overfilling. The clipper is ready for operation.
After pressing the "Dosing" button, the filler automatically delivers the required dose of minced meat through the cog into the casing with the required overfilling density. The operator closes clipping manually. Two clips, and loop are applied and the sticks are cut with the cutter. The twisting is opened and in its upper position the filler received the command to give the next dose.
The clipper is equipped with 5-inch touch screen LCD monitor. The size of the clickable menu icons is optimized for comfortable operation by the operator wearing rubber gloves. The menu interface is simple and intuitive. The control buttons have a high degree of moisture protection.
The use of a special "apple" type connecting unit makes it possible to simplify connection of the clipper with the filler, to level the tilt of the equipment on the floors, to avoid misalignment of the cog in relation to the twisting jaws which lead to casing tears and porosity in sausages.
Simplified adjustment of the position of the movable cog axle - for a minimum mechanical effect on the casing, the optimal position of the cog axle at the moment of clamping the casing with the jaws is as close as possible to the fixed jaws of the clipper. For each diameter of the casing horn filled with minced meat, the twisting center will change. The cog axle position for each diameter is adjusted by rearranging the fixing device in accordance with the required diameter on the scale.
The assortment of cogs of different diameters: 20 mm, 25 mm, 30 mm, 35 mm, 50 mm, rose-cog - 30 mm.
For more Sausage Clipperinformation, please contact us. We will provide professional answers.
The use of an active brake significantly reduces the likelihood of casing breakage. The degree of the brake unit shift can be adjusted for each casing.
The "Cog filling function" allows for quick filling the cog at the beginning of the operation and forming the last stick of the corrugated tube, not changing the clipper settings and not moving the dosing flag.
The function of adjustment of the jaws opening width allows limiting the width of jaws opening of the clipper during operation with small caliber casings to reduce amplitude of the twisting handle movement which reduces the load on the operator’s hand and, in general, labour intensity of the twisting process.
Adjustment of the length of the twisting drive handle allows changing the length of the twisting drive handle depending on the casing diameter used. When clamping large diameters, the handle is extended increasing the lever and reducing the tension of the operator’s hand; when processing small diameters, the handle is shortened reducing the amplitude of hand movement during twisting.
The clipper allows for regulating not only the clip clamping force and the clipping speed (the speed of the pusher movement), but also changing the speed of the pusher movement from the moment the clip starts to be clamped until the end of the process. This made it possible to increase productivity of the clipper, while retaining the possibility of careful clipping for protein casings, since before the impact on the clip begins, the pusher moves at maximum speed, and when it reaches the clip, the speed changes to the set one.
To ensure maximum purity of sausage tails, it is possible to adjust overhang of the inner jaws of the clipper for each type and diameter of the casing (thickness of the casing harness). Thus, it is possible to adjust the maximum squeezing of minced meat from the casing harness not damaging it.
Independent adjustment of the degree of clamping of each clip allows adjusting the degree of clamping (separately at the beginning of the stick and separately in the end of the stick) when a loop or a labeling tape is fed under it increasing thickness of the casing harness, which is especially critical when working with delicate casings.
The clipper is equipped with the advanced loop introduction system. The loop tape unwinding unit has been improved and more efficient loop feed into the clipping zone has been provided. The mechanism for removing the used tape (loop backing) has been simplified.
Allows checking operability of the clipper units directly on the control display by input and output signals without disassembly of sheatings and access to the units themselves.
Are you interested in learning more about manual clipping machine? Contact us today to secure an expert consultation!