New Scaffold Fittings - Scaffold Board Limpet Clip

To place an order you will be asked to provide a valid email address so that we can send a confirmation email as soon as your order has been placed. This provides you with the opportunity to check the delivery details and advise if any amendments are necessary. The cost of delivery varies, depending on the size, weight & volume of your order. You will be asked for the delivery address and postcode on the checkout screen, at which point any additional charges due to the location will be applied.

With competitive price and timely delivery, Gongde sincerely hope to be your supplier and partner.

We use various methods of delivery for our orders, which include DHL and DX Freight for small orders consisting of bagged items and small bundles of tube etc., medium sized orders are delivered using Palletline or one of our own vehicles and larger orders are transported using our own HGV with fork lift offloading, if applicable.

For more information on delivery charges, please contact our office and a member of our team will be happy to help.

These rates will vary, depending on size, weight and location of delivery. We aim to be able to deliver within 2/3 days to most locations.

Please note: Standard delivery is Most of UK Mainland Only and excludes zones 2 & 3 along with some parts of South West England and West Wales, Scottish Highlands and Islands due to the distance involved, please contact our office for a delivery rate.

The Metal Store now stocks a number of scaffold fittings and tube for use on site or furniture. Each fitting is offered in Pressed Steel or Drop Forged Steel. Pressed Steel is cold pressed into shape from a single piece of material and drop forged steel is formed using heat. The difference is that drop forging leaves the centre of the metal not as hard as the outside, but press forging gives more uniform hardness for larger components.

Please scroll the page to ensure you see the full list of products available

The Metal Store is one of the leading online suppliers of scaffolding tube in the UK.

What are scaffolding fittings and what are they used for

Scaffolding fittings, often referred to as scaffolding joints, scaffolding components and scaffolding connectors are used to join scaffolding tubes, creating a stable and reliable structure. Because scaffold fittings help to support the weight and pressure of the scaffold structure, it’s important to ensure you select the correct fittings for the structure you’re putting in place. Doing so will decrease the possibility of your structure swaying collapsing or snapping.

There are various types of scaffold fittings to choose from for your desired project. These fittings serve different purposes, therefore it can be challenging to decide on what’s right for you. Our team are here to help and will do their best to support with whatever you need. Fittings include; single, double, wrapover and pressed steel couplers are used for this.

Scaffolding fitting range and industry standards

The Metal Store now stocks a number of scaffold connectors for use on-site or with furniture. Each fitting is offered in Pressed or Drop Forged Steel. Our range of scaffolding fittings and descriptions are listed here:

The Metal Stores Double Coupler is a heavy duty forging with large rivet design used to connect two scaffold tubes at a 90 degree angle. It Features a solid body construction for cruciform stiffness. This fitting has been tested to EN74 Class B and has a slip resistence of 15 kN & Failure load of 30 kN. This fitting is available in two options, Drop Forged and Pressed Steel.

Our Swivel Couplers are designed to connect two 48.3mm scaffold tubes at any angle and can be used with all types of scaffold. This fitting is mostly used when diagonal bracing is required. Also commonly used with guard rails, lighting rigs and staging. These fittings are available in Drop Forged and Pressed Steel and have been tested to EN74 Standards

The Wrapover Coupler, also known as a Putlog, is a heavy duty fitting designed to secure transoms (board supports) or Putlogs to ledgers, connecting two 48.3mm tubes at right angles. This fitting can also be used in lighting, rigs, staging and guard rails.This fitting is Not designed to be load bearing. Our Wrapover Coupler is tested to BS1139-2.2 and has a slip resistence of 1.02 kN along the transom. This fitting is available in Drop Forged or Pressed Steel.

Contact us to discuss your requirements of Scaffolding Pressed limpet Coupler. Our experienced sales team can help you identify the options that best suit your needs.

The Pressed Steel Sleeve Coupler is designed to connect end to end joints on standards, ledgers or bracing. It's wide range of adjustability means it is also possible to fit various sizes. As with all of our scaffolding fittings, they conform to EN74 which is the most recent British Standards.

The Metal Store's Joint Pin is a heavy duty pressing, designed to connect two 48.3mm scaffold tubes end on end. This fitting has a longer body to allow for bending resistance. It can be used with all types of scaffolding, guard rails, staging and also light rigs. Our Joint Pins conform to BS1139-2 and are available in Drop Forged or Pressed Steel.

Our Fixed Girder Coupler also known as a Gravlock Coupler, is designed to connect 48.3mm outside diameter scaffold tube to a range of structural sections up to a maximum flange thickness of 45mm. These fittings are to be used in pairs, zinc plated and tested to a AS1576 standard.

The Metal Store's Swivel Girder Coupler also known as a Swivel Gravlock, is designed to connect 48.3mm outside diameter scaffold tube to a range of structural sections up to a maximum flange thickness of 45mm at any angle through 360 degrees. These fittings are to be used in pairs, zinc plated and tested to a AS1576 standard.

Our Pressed Steel Base Plate is designed for use with lightly loaded applications, this is an economy type of base plate intended to provide a weight bearing flat surface to permit even load distribution of scaffold standards. It is manufactured from carbon steel to the very latest British Standards.

Protect both your employees and the general public with these highly visable scaffold tube end caps. Made from a tough and robust plastic for long lasting sustainability, they simply fit over the end of any scaffolding tube.

Looking for scaffold tube fittings near you

It’s not an issue whether you’re located nearby or in a completely different area of the UK. We proudly offer FREE UK shipping nationwide for all orders over £99+VAT. Our delivery is fast, reliable and we’ll keep you informed every step of the way.

Need other scaffolding products to complete your project?

The Metal Store now has a wide range of scaffolding products so you can get everything you need in one place. We stock varying lengths of scaffolding tube and scaffold boards , plus a range of scaffolding accessories including debris nets, sleeves, toggle ties and metal board ends.

Buy scaffolding fittings from The Metal Store

Our full range of scaffolding fittings can be viewed and purchased easily online for either delivery or collection. Simply find the scaffold fittings you need, add the relevant quantities to your basket and checkout in three simple steps.

You can also call our sales team on 01274 875479 or email us at [email protected] and we will be happy to help.

Want more information on Adjustable Scaffolding Steel Props? Feel free to contact us.