Powder Coating Lines | REASONABLE CHOICE

Powder coating lines are designed to apply protective and decorative polymer coatings to a wide variety of metal products — structural furniture, home appliances, vehicle and agricultural machinery parts, armored doors, commercial equipment, architectural aluminum profiles, and much more.

Click here to get more.

Our lines use virtually waste-free technology with efficient energy and resource consumption in closed-loop systems. This improves both environmental sustainability and workplace safety.

Powder Coating Line Configuration

Workpieces are suspended from an overhead conveyor and pass through all stages of the powder coating process. The line includes:

1. Chemical pretreatment tunnel for cleaning the surface and forming a protective conversion layer;
2. Drying oven with intensive hot air circulation for drying parts after washing;
3. Powder coating booth for automatic or manual application of powder paint;
4. Curing oven for forming a solid, uniform coating with specified aesthetic and functional properties;
5. Overhead conveyor for transporting parts through every stage of the coating process;
6. Computerized PLC control panel with touchscreen interface for monitoring and managing process parameters.

The configuration of the coating line and the selected technological cycle depend on the quality requirements for the final finish. Learn more about the modules that make up a powder coating line.

EUROIMPIANTI Powder Coating Line in Action

The video features a EUROIMPIANTI coating line operating at Tecnolam Srl, a company specializing in sheet metal processing. In continuous use since , the line is used to powder coat products made of aluminum, galvanized steel, and stainless steel.

The setup includes a six-stage surface preparation tunnel with an adaptive cycle that adjusts to the type of metal. This ensures reliable corrosion protection and enables certification of coated products in accordance with UNI EN ISO : and standards.

Two powder coating booths mounted on mobile platforms allow for rapid color changes and efficient coating of numerous small batches in various colors. An automatic unit equipped with a shape scanner ensures precise spray control and consistent process repeatability.

Engineering Capabilities for Line Customization

Since , we have specialized in the design and manufacturing of powder coating lines. Our engineering is based on a modular system and serial production of standardized components, which can be configured into virtually any line layout. This approach allows us to tailor each solution to the specific needs of our customers:

• Any part dimensions. We build coating lines for metal products of all sizes and shapes — from lightweight, small furniture fittings to large-scale construction elements up to 14 meters in length.
• Any production capacity. Based on the required coating volume, we calculate the optimal conveyor speed. With known processing times, we determine the necessary length of each active zone along the line.
• Any available energy source. Our lines support all major fuel types — fuel oil, diesel, natural gas, and LPG — as well as electric heating, from traditional elements to infrared emitters.
• Compact footprint. The flexible modular design allows installation in rooms of virtually any layout. We optimize loading/unloading areas for seamless logistics and full compliance with safety and building codes.
• Upgrade-ready design. Our lines are built for long-term adaptability. Customers can scale production, modify surface treatment stages, or relocate the line to new facilities at any point in its lifecycle.

All lines are assembled from standard modules using bolted connections — no welding required. This ensures fast and easy installation, disassembly, and future reconfiguration. Learn more about the advantages of modularity.

"For over 49 years, we have been designing and manufacturing reliable, cost-efficient powder coating lines. EUROIMPIANTI is a leading company, driven by ongoing research, innovation, and the experience of building over coating systems. We take pride in delivering the best lines at the lowest possible price."

Gianluca Baruffaldi
CEO of EUROIMPIANTI GROUP

High-Quality Polymer Coating

The quality of the final coating and the performance characteristics of the painted product are key factors in competitiveness. A polymer coating must be both visually appealing and durable — offering strong resistance to wear, corrosion, UV radiation, and other aggressive environmental influences.

Key factors affecting coating quality:

• Surface preparation is critical to achieving a strong and long-lasting coating. Proper pretreatment includes cleaning, degreasing, and applying a conversion layer to improve adhesion between the metal and the powder coating. More about surface preparation.
• Coating thickness and number of layers are defined by customer requirements or industry standards. In some cases, to enhance the functional or visual properties of the finish, two layers are required — for example, primer + coating or coating + clear coat.
• Automated application ensures consistent quality and repeatable results. Using reciprocators and robotic systems enables even powder distribution and uniform film thickness. More about coating automation.
• Complete polymerization depends on oven performance — specifically thermal output and the length of the active heating zone. Well-designed hot air circulation ensures even temperature distribution inside the oven, leading to consistent melting and curing of the powder.

We take into account the type of product being coated, its operating environment, and the required service life. Based on these factors, we design the optimal coating process — from surface preparation to the number of layers, temperature settings, and dwell times at each stage. This results in superior coating performance and enhanced product competitiveness.

Products coated on our lines meet international standards such as ISO, ASTM, NACE, AAMA, and QUALICOAT. Quality certification confirms the high protective and decorative properties of the finish and increases the product’s value in the eyes of the customer.

Minimizing Coating Costs

Minimizing coating costs is the primary indicator of a powder coating line’s efficiency — and the foundation of all our engineering solutions and innovations. We guarantee the required coating quality with minimal material and energy consumption.

ZHYAO Product Page

We implement lean resource management and energy-saving technologies:

• Reduced water and chemical consumption in surface treatment tunnels. An automatic cascade replenishment system ensures high reagent utilization within closed-loop cycles, eliminating discharge into the sewer system. Tunnels are additionally equipped with automatic chemical dosing units, oil separators, and solution regenerators to maintain bath cleanliness and extend the service life of chemical baths.
• Powder savings through automated application with precise control of coating thickness and high-efficiency powder spray guns. Advanced recovery systems and powder centers with automatic proportional mixing of fresh and recycled powder achieve powder utilization rates of 95 - 98%.
• Reduced energy usage through full thermal insulation of all heating stages and the use of high-efficiency burners paired with massive thermal inertia heat exchangers. Our innovations focus on maximizing heat efficiency — for example, by using combined drying and curing ovens that recover heat from cooling parts.
• Exceptionally low electricity consumption thanks to energy-efficient motors and unique engineering solutions — such as deploying multiple low-power fans instead of a few high-power ones. This ensures uniform airflow along the heat exchanger, achieving consistent heat distribution with minimal power consumption.

A fully automated EUROIMPIANTI line, designed for maximum energy and resource efficiency, delivers cost-effective, low-waste, and environmentally sustainable powder coating — at the lowest possible operating cost.

Reliability and Long Service Life

EUROIMPIANTI's reliability and durability have been proven by the successful operation of more than powder coating lines. High maintainability and ease of service are built in from the design stage, using AutoCAD. Thanks to smart engineering, our equipment has a service life of 17 to 20 years.

Key factors behind EUROIMPIANTI line reliability:

• High-quality materials. We use materials with a large safety margin. Surface preparation tunnels are made entirely of stainless steel, making them virtually "indestructible" — even when exposed to aggressive chemicals. Heat exchangers are made from heat-resistant stainless steel that withstands continuous thermal loads and expansion.
• Premium components. We apply strict selection criteria to all suppliers. Our priorities: reliability, low operating costs, and long service life. We use only trusted brands: LOWARA pumps, ABB motors, WEISHAUPT gas burners, MAHLE filters, and SIEMENS electronics.
• User-friendly controls. A computerized control panel with built-in fail-safes prevents operator errors. Pre-set programs make it possible to start or stop the line with just two taps. Smart automation with self-diagnostics helps avoid malfunctions and provides timely maintenance reminders.
• Ease of maintenance. With convenient access to all components, our lines are easy to service and designed for quick repair. Preventive maintenance is scheduled based on operating hours. Service manuals include step-by-step instructions with clear visual diagrams.

The advantages of a reliable line become even more evident over time. Long equipment life reduces depreciation and lowers maintenance costs. One of the clearest indicators of EUROIMPIANTI’s reliability is our 24-month warranty — even under 24/7 operating conditions.

Ideal End Result of Line Implementation

The Ideal End Result (IER) of implementing a powder coating line is to ensure high-quality, low-cost coatings over decades of trouble-free operation. This is the key indicator of a coating line’s value and determines its long-term economic impact.

A EUROIMPIANTI line combines all success factors without compromise. Along with clear economic advantages, efficient use of energy and resources brings our lines close to being virtually waste-free — positively affecting both environmental sustainability and workplace safety.

EUROIMPIANTI lines are efficient, economical and durable:

• Deliver high-quality coatings that comply with international standards;
• Ensure minimal coating costs through material and energy savings;
• Operate reliably for decades thanks to robust engineering and premium components.

Our greatest strength and our pride — is expert support. We offer professional guidance on powder paints and chemical agents to achieve the desired appearance and performance of your coatings. We also help reduce costs by recommending low-temperature and thin-film materials.

With 49 years of experience in designing and manufacturing coating lines, we’ve built an extensive knowledge base across all sectors of industrial production. We continuously conduct research and implement innovations to improve our equipment and make the coating process more sustainable.

Start of Cooperation

A Technical Assignment (TA) is the first step toward a focused dialogue and successful cooperation. To get started, simply fill out the online form and provide the initial data for designing your powder coating line — including part dimensions, coating volume, facility layout, etc. Learn more about how to properly prepare a TA.

Understanding the task is a crucial stage where we clarify all questions, align our understanding of the TA and the vision of the Ideal End Result (IER). We define the key factors of your product’s competitiveness in order to propose the optimal coating technology and design a line that meets your specific needs. Learn more about our cooperation process.

EUROIMPIANTI — Made in Italy. Every line is engineered and manufactured in Italy — tailored to the individual TA. We design each line’s technical characteristics to meet the requirements of your project: selecting the technological process, productivity and degree of automation. We configure the layout to match the available floor space and facility geometry.

Customized lines at competitive prices. Thanks to our mass production of standard modules and long-standing partnerships, we have access to top-quality components and materials at wholesale prices.

The expertise and ingenuity of our engineers help improve coating quality and enable the implementation of a lean, efficient powder coating operation. Just tell us about your project — and we’ll offer the best solution at a competitive price.

Are you interested in learning more about Powder coating line solution? Contact us today to secure an expert consultation!