Industrial conveyors are the backbone of production plants in every industry, allowing for seamless operation throughout the plant, as well as the transportation of material to and from storage and shipping.
LIONSHELL supply professional and honest service.
As a leading provider of bulk material handling equipment, we’ve put together the information below to serve as a comprehensive guide in selecting the most appropriate belt conveyor types, how to best customize industrial conveyors according to handling goals, and essential guidance for troubleshooting. What we’ll cover:
Selection:
Configuration:
Troubleshooting
Industrial conveyor systems are extremely versatile; they can be modified and customized to suit a vast array of specific requirements, which can sometimes make selecting the most appropriate conveyor for a given job a challenging task.
Despite some overlap in capabilities, industrial belt conveyors are classified by how they function, with each type offering different strengths.
FEECO offers three main belt conveyor types that cover most handling needs:
It’s important to note that bucket elevators complement industrial conveyor systems by adding high-capacity vertical handling when additional height and/or capacity are required. Since they aren’t a true conveyor, bucket elevators are not covered here, but they remain an essential tool in bulk solids handling operations.
Troughed belt conveyors are the most popular and most versatile type of industrial conveyor available.
Also called a troughing conveyor, this type of industrial conveyor is made up of a rubber conveyor belt riding on heavy-duty troughed rollers, each securely mounted to a structural steel frame.
Because the rubber conveyor belt rides on troughed rollers, the material is “tracked” towards the center of the belt, which prevents the material from spilling off the conveyor.
Depending on the size of the conveyor required, a heavy-duty motor and gear reducer are typically selected, along with the proper belt tensioner or take up system, both of which are discussed later.
Belt conveyors can be set to run horizontally, or at a slight angle (in this case the unit may be referred to as an incline conveyor). Some materials may require special belting to run at higher angles.
The belt conveyor itself has the ability to work with almost any material. Several different belting options are available, each designed for different material characteristics.
Troughed belt conveyors can be designed with either a structural steel channel frame, or fabricated truss frames. Platforms and walkways can be incorporated for improved maintenance and observation in longer-spanning conveyors.
Troughed belt conveyor
A steep incline conveyor is a vertical conveyor that goes beyond the slight angle a traditional troughed belt conveyor can achieve, conveying at angles between 18° and 90°, while still maintaining the same feed and discharge properties of a standard belt conveyor. This is accomplished with multiple pulleys and rollers designed to redirect the conveyor vertically. The vertical change in direction then spans the elevation required, while at the same time, minimizing the equipment’s footprint, which makes it a great solution in settings where space is limited. Belting options have a cleat, which contains the material as it moves vertically, resulting in reduced material fallback.
Steep Incline Conveyor with tramp metal magnet and metal detector
A reversing shuttle conveyor is, in short, a belt conveyor mounted onto a rail system. The conveyor has the ability to move along the rails in either direction, and the belt rotation can be switched for either direction, making this industrial conveyor great for evenly filling multiple hoppers or storage bins. The conveyor is typically around half the length of the rails, giving it plenty of room for several discharge locations. Both functions (belt rotation and shuttle movement) can be automated or controlled by an operator.
3D Rendering of a FEECO Reversing Shuttle Conveyor
The objective shared by incline conveyors and steep incline conveyors – to convey bulk solids on an incline – often presents confusion in determining which type of industrial conveyor is best for a given application.
While both offer an effective handling solution, these two industrial conveyor types operate and are designed very differently, making the selection between the two dependent on a few key factors. In an effort to make the choice between the two more clear, we’ve outlined the primary differentiators between incline conveyors and steep incline conveyors here.
As mentioned, both incline conveyors and steep incline conveyors can convey material on an angle to some extent. The key difference between these two industrial conveyor types is the angle at which they can transport material.
A typical incline conveyor is simply a troughed belt conveyor positioned on an incline (or decline). Troughed belt conveyors are generally not effective at inclines greater than 18°, as material slippage on the belt becomes a concern beyond this. Conversely, steep incline conveyors can convey material at inclines up to 90°.
One of the most common reasons for selecting a steep incline conveyor over an inclined conveyor is the smaller spatial footprint.
Incline conveyors require a specific amount of conveyor length to reach the desired amount of lift (see chart below). In other words, if a steep incline conveyor is not used, the greater the amount of lift, the longer the conveyor will need to be in order to convey the material at an angle that promotes optimal handling.
Because steep incline conveyors can efficiently move material at a steeper angle, their overall length is significantly reduced. As such, steep incline conveyors take up considerably less space than a standard troughed belt conveyor positioned on an incline.
The chart above illustrates the distance/length requirement for the level of incline on an inclined conveyor.
In addition to a lower profile, the “L” and “S” configurations of the steep incline conveyor allow it to replace multiple pieces of handling equipment; one S-type steep incline conveyor can replace two belt conveyors and a bucket elevator, significantly reducing the overall footprint of the handling equipment.
Steep Incline Conveyor
Because steep incline conveyors can combine horizontal and vertical handling to replace multiple pieces of equipment, they can also eliminate the need for additional transfer points.
This reduction in transfer points can be a major benefit, as it lessens the potential for material degradation and dust generation by providing a continuous conveying solution.
Though steep incline conveyors generally tend to be more messy than a standard inclined conveyor, FEECO utilizes custom-designed inlet hoppers to maximize loading capacity for straight inclines while keeping loading points clean. And while steep incline conveyors cannot utilize the belt cleaners that standard inclined conveyors can, enclosures, as well as other options, are available to minimize fugitive material. Additionally, a drag chain conveyor can be included under the steep incline in order to capture fugitive material and introduce it back into the material stream or capture it in a collection hopper.
Although the available belt widths for these two types of industrial conveyors are the same (18-72”), steep incline conveyors have a slightly lower capacity than standard incline conveyors. This reduced capacity is because the sidewalls on the steep incline belt take up a portion of the belt width, making the “effective width,” or the width inside the sidewalls, slightly less.
The operational differences in these two types of industrial conveyors necessitate different physical and structural requirements as well. These differences are most apparent in the belting and structural framing.
Incline conveyors typically use smooth belting. Cleated or chevron belting can be employed to contain material and prevent fallback, if necessary. This type of belting is generally effective for angles up to 30°, depending on the characteristics of the material being conveyed.
Since steep incline conveyors run at angles exceeding 30°, they require a different type of cleated belting known as pocket or corrugated sidewall belting.
Pocket or sidewall belting forms “pockets” or troughs at intervals along the conveyor in order to contain material at steeper angles. A deeper exploration of belting for both types of industrial conveyor can be found below.
FEECO Steep Incline Conveyor with pocket/sidewall belting
The difference in structure requires a different frame design; while troughed incline conveyors can use a channel stringer or structural truss-type of frame, steep incline conveyors only use the channel stringer type.
The table below summarizes the main differences between incline conveyors and steep incline conveyors:
It’s important to recognize that neither type of conveyor is necessarily better than the other; whether or not one is a fit over the other is dependent on the specific parameters of the situation. Most often, this comes down to the allotted spatial footprint in the plant.
In facilities where spatial limitations exist, the steep incline conveyor offers a better handling option. However, if space is not a concern, an inclined troughed belt conveyor can achieve a greater capacity and promote a cleaner production environment.
As other factors such as transfer points and fugitive material come into play, it is often helpful to work with a bulk solids handling expert to identify the best solution.
Similarly, those looking for an industrial conveyor often face the choice between a troughed belt conveyor and a screw conveyor.
While screw conveyors offer a cost-effective option for many settings, they are not a fit for all applications. In selecting the best fit for the job at hand, it’s important to understand the key differences between these two types of handling equipment, and where belt conveyors provide a better handling option.
Troughed belt conveyors are the material-moving standard for good reason, bringing several benefits to bulk material handling systems. In comparing belt conveyors and screw conveyors, the best fit is not always immediately clear, leading many buyers to opt for the less costly screw conveyor. However, they often discover later that a belt conveyor is much more suited to the job.
There are several situations in which the industrial belt conveyor provides a better handling option:
Belt conveyors promote gentle handling with very little material degradation; once loaded onto the belt, material is contained in the trough, with minimal agitation between loading and discharge. This keeps friable or fragile materials intact and ensures material or product arrives at its next stop in the precise condition intended.
In contrast, since screw conveyors utilize a helical screw inside a trough or tube to advance material forward through contact with the blades, screw conveyors cause some friction and therefore degradation. As such, they are not a fit for materials requiring gentle handling or where friability is concerned, such as with granular fertilizers.
Capable of handling material at up to 8,000 TPH, belt conveyors can handle much higher capacities than screw conveyors. Belt conveyors are available up to 72” wide and can operate at speeds up to 600 feet per minute (FPM), making them the preferred choice for high-capacity settings.
Both belt conveyors and screw conveyors are capable of handling a wide range of materials. Screw conveyors, however, are generally not a fit for conveying materials that are long and/or stringy, as they are likely to become tangled and cause blockages as a result of the horizontal screw motion. Materials that typically do not do well in a screw conveyor include:
Because of the torque necessary to advance materials by force, screw conveyors require more horsepower compared to belt conveyors, especially if they will be operated on any sort of incline.
Belt conveyors have an additional advantage when conveying on an incline; in a screw conveyor, some material tends to fall backward over the blades, making the belt conveyor more efficient. Vertical screw conveyors are an option, but efficiency is reduced as the incline increases.
Perhaps the biggest advantage of the belt conveyor is that it can convey material for both short and long distances. FEECO conveyors can carry material for distances anywhere from 10’ to ’ with a single conveyor. Screw conveyors are limited to much shorter distances – typically around 30m maximum.
Belt conveyors are also a better option for handling abrasive materials. The friction that occurs in a screw conveyor accelerates abrasive wear on the unit, unlike with the belt conveyor where material is not moving over the carrying surface. And while screw conveyors can be fitted with abrasion-resistant liners, belt conveyors still require less protection from abrasive materials, only requiring added protection at discharge hoppers and skirt boards.
Belt conveyors are generally easier to clean than screw conveyors; their open design allows for maximum accessibility and the use of belt cleaners are often enough to manage cleaning requirements.
In contrast, screw conveyors do not allow for self cleaning and since they are contained, must be shut down and dismantled in order to fully clean out the trough and shaft. This can be especially problematic when working with wet and/or sticky materials that tend to cake and build up, requiring more frequent cleaning.
Screw conveyors can cause material to pack together as it moves through the unit. This can cause buildup, blockages, and may even result in packed material eventually dislodging and discharging with the material.
Such problems often translate to increased upset conditions and downtime for cleaning and maintenance, additional screening or conditioning of the material, and product sizing irregularities. As such, screw conveyors are typically unfit for materials such as clays and composts, which are prone to packing.
The industrial conveyor industry is expansive, and while the number of manufacturers does provide diversity in selection, it often makes choosing the right industrial conveyor manufacturer a challenge.
Below are the key factors to consider when selecting an industrial conveyor manufacturer.
One-size-fits-all belt conveyors pervade the bulk material handling market, promising efficient, trouble-free handling. But as anyone who works with bulk solids knows, a one-size-fits-all approach is not appropriate outside of low-value, light-duty applications.
All materials present unique challenges in handling, requiring a manufacturer that can design belt conveyors around those challenges to yield the most efficient and reliable handling solution possible.
In selecting a manufacturer, ensure the manufacturer recognizes this need for flexibility and is prepared to meet such challenges through thoughtful, custom designs.
The material to be handled will dictate many aspects of industrial belt conveyor design. Parameters such as a material’s bulk density, particle size distribution, moisture content, angle of repose, and so forth, will influence decisions throughout the engineering and design process.
As such, it is important to select a manufacturer that has a diverse handling background, allowing them to provide expertise in unique handling challenges, and expertly tailor equipment to work with the material in the most effective way possible.
Ultimately, this will minimize downtime and maintenance costs, and reduce the many headaches associated with an under-performing system.
During the selection process, ask short-listed candidates for project profiles, references, or other materials that illustrate proven success stories.
Industrial conveyor systems often operate in harsh environments and are tasked with extremely demanding workloads. Given that an offline conveyor can put an entire operation at a standstill, reliability is essential.
For this reason, priority should be given to conveyor manufacturers that follow strict quality standards in both design and fabrication. Materials of construction, welding procedures, and more, should all be focused on achieving a lasting, durable product that minimizes wear and downtime while maximizing production.
In high-value or high-capacity production settings, the cost of downtime and potential losses represents significant risk, making avoiding unexpected outages a top priority. Just as equipment quality plays a critical role in preventing unnecessary down time, so too does maintenance, and even the most well-built conveyors must be maintained to provide efficient and reliable performance in the long term.
Be sure to select an original equipment manufacturer (OEM) that will stand behind their work, providing tailored support, from conveyor inspections and routine maintenance, to spare parts and troubleshooting services. This support often makes the difference in the ability to minimize downtime.
The needs of a bulk solids handling operation can vary significantly and are often incredibly specific from one application to the next. As a result, customization has become a cornerstone of bulk material handling systems, allowing conveyors to be expertly applied to any operation.
The ability to customize a system with precision can optimize efficiency, reduce downtime, and lower maintenance costs. It also prolongs equipment life, reduces the need for clean-outs, encourages process automation, and more; a well-designed handling system creates a seamless production facility, whatever the application may be.
The customizations available for belt conveyors are as varied and diverse as the materials these systems handle. Some of the most common add-ons and customizations are listed here.
Designed for material discharge control, a belt tripper, also called a tripper conveyor, re-routes the belting to discharge material at any point along the conveyor. Belt trippers can be mounted stationary, or set to move locations automatically or manually to release material on one side or both sides of the conveyor.
FEECO Belt Tripper
A belt plow is a simplified mechanism for diverting the discharge location on a belt conveyor. Belt plows are a more economical alternative to the belt tripper. However, they are not as versatile and are generally used when only a limited amount of discharge locations are required. Belt plows can also release material from one or both sides of the conveyor.
Belt plow on industrial conveyor
A belt feeder controls the amount of material released onto the belt conveyor, resulting in a consistent material feed rate. This makes it possible to add bulk material into the hopper without causing any quantity fluctuation in the process system.
Belt Feeder for gold ore
Idlers are the support mechanism on which the belt rides. The Conveyor Equipment Manufacturers Association, better known as CEMA, sets forth the industry standard for best practices in idler dimensions, load, and capacity.
Note: not all industrial conveyor manufacturers follow CEMA standards, so this should be a consideration in the buying process.
Troughed belt conveyors may utilize a variety of idler types for a given conveyor:
Within these divisions, idlers are available in many different configurations, with adjustable angles, various facings, seal types, and more.
35° Steel Roll Idlers on Channel stringer frame
Flat rubber disc impact idlers
Idlers are generally constructed out of steel. However, steel is not always the best fit, such as when working with abrasive or corrosive materials. In instances such as these, composite idlers offer an excellent alternative.
Composite idlers can be constructed from a number of different materials, the choice of which is dependent on the application. In all cases, composite idlers offer several advantages over steel:
Impact beds, sometimes also called cradles, can be a better option over idlers in some situations, providing extra support for heavy loading; impact beds are beneficial when large or heavy pieces of material will be loaded onto the belt, or, when heavy material will be loaded from a greater height, causing more forceful impact with the belt.
Skirt boards are frequently used to aid in material containment and dust management. Skirt boards run parallel to the conveyor along the interior of the belt in order to keep material from making its way off of the conveyor.
Skirt board side plates are available in carbon steel or stainless steel. Optional liners can be provided in AR400, tungsten carbide, or UHMW, as well as non-stick liners such as teflon. The portion of the skirt board in contact with the belt is typically rubber and can be upgraded to high-temp rubber if needed.
Close-up of a belt feeder with skirt board system
When it comes to the support structure of the conveyor, there are two generally accepted options: truss frames and channel frames.
Truss-style frames are available in several depths, allowing for long spans between support points.
Truss frames awaiting shipment
When the conveyor will be located close to grade, or when long spans between support points are not required, channel frames provide an alternative frame option.
Channel frame conveyor
One of the most important aspects of an industrial conveyor system is the surface treatment. Since the equipment will regularly be in contact with the material, the materials of construction and paint/coating system should be carefully considered. The correct surface treatment will protect the equipment from abrasion and corrosion, while maintaining the longevity of the equipment.
Hundreds of options are available, from stainless steel, to galvanized steel, various paint systems, and more. The standard FEECO paint system is a durable, single coat, direct to metal Epoxy Mastic.
As the component most in contact with the material being handled, belt type is also a critical consideration in industrial conveyor design and selection, with many options available, including 2-ply, 3-ply, 4-ply, and 6-ply with various PIW (pounds per width-inch) ratings. Belt cover options include typical RMA grade I and II, with upgrades available for oil resistance, high temperatures, solar/UV protection, flame retardant, chemical resistance, and more. Additional information on types of conveyor belts can be found below.
Instrumentation can also provide added functionality and automation to a bulk handling system. This might include incorporating zero-speed switches, e-stops, belt alignment switches, or even plugged chute switches for indicating a hopper backup.
Weather covers are often essential when handling material in the elements. Covers protect material from rain, snow, ice, and direct sunlight exposure. They may also aid in dust control, preventing the material from becoming windblown. FEECO covers are designed to be long-lasting and durable, while still allowing for easy access for observation and general equipment maintenance. Partial, full, or three-quarter covers are available.
As with weather covers, gallery enclosures also protect material from the outside elements. Gallery enclosures, however, also provide weather protection for workers as well, allowing them to walk beside the conveyor inside the enclosure. A gallery can also span much greater distances than a typical truss frame conveyor.
Gallery conveyor
As a safety feature, guarding should not be overlooked. While the guarding on a system may be regulated in some cases, in others, it is up to the system owner/operator to protect workers from moving parts.
Guards are available for nearly every part of the conveyor to ensure moving parts and pinch points are not accessible without dismantling the conveyor. FEECO can accommodate both OSHA and MSHA regulations for proper guarding.
It is essential to select the correct belting and cleaning options in order for an industrial conveyor to operate at its full potential.
While there are many conveyor belt types, the most appropriate belt is determined by examining what belt characteristics will result in the most efficient handling solution for the material’s unique characteristics at any given point in the process. For example, if material is hot, such as when coming off of a kiln or dryer, a heat-resistant belt may be required. Choosing the right belting for the application at hand can mean the difference between an efficient, low-maintenance conveyor, and one that results in frequent maintenance and downtime.
In most cases, shuttle conveyors and troughed belt conveyors can run the same types of belts and belt cleaners. The most common options are discussed here.
For conveyors handling material coming off of hot processes, heat-resistant belts offer an excellent option, resisting degradation associated with heat. Typical conveyor belting is rated for 200°F steady operating temperature. Heat-resistant belt ratings are 400°F, but are available for temperatures as high as 750°F.
When working with moderately oily materials such as waste products or some fertilizers, an oil-resistant belt provides protection from swelling or ply separation due to oil exposure. This type of belting is also referred to as MORS.
Raised profile belting can be used for inclined conveyors carrying material at limited angles exceeding 20°. This type of belting features low-profile cleats to assist in preventing material fallback while conveying on an angle. Despite this raised profile, this type of belting is still flexible enough to be used on conveyors with small-radius pulleys.
FEECO Incline Conveyor with raised profile belting
Other belt types can be sourced for chemical resistance, flame retardance, and solar resistance.
Some materials, particularly those that are wet or sticky, have a tendency to adhere to the belt surface, causing carryback, build-up, and ultimately preventing the conveyor from operating correctly. These problems contribute to increased wear and mechanical failures, as well as higher maintenance costs and downtime.
As such, belt cleaners are an essential tool in prolonging conveyor belt life and protecting pulleys, keeping belt conveyors in optimal condition and ensuring efficient operation for years to come.
Several options and designs exist for keeping conveyor belts clean. Commonly used implements include:
A conveyor belt cleaner, also referred to as a belt scraper, is a spring-loaded blade or plate that scrapes the conveyor belt in order to clear any fugitive material sticking to the belt. The scraper blade may be made up of plastic or metal and is usually mounted at the tangent point of the discharge pulley, removing material before it is carried past the discharge point.
A dual conveyor belt cleaner setup is an ideal option for materials with a higher moisture content, or that require more aggressive belt cleaning.
This setup prevents material from traveling to idlers and other components through the use of a primary and secondary belt cleaner; by positioning a primary belt cleaner at the head pulley, the cleaner is able to remove the bulk of material. A secondary cleaner, positioned lower than the primary cleaner, sitting just behind the head pulley, removes any remaining material for a more thorough clean.
The return side belt plow, also commonly called a V-plow, is another belt cleaning option. This v-shaped “plow” is positioned just before the tail pulley on the return (non-carrying) side of the belt in order to prevent any large particles from getting lodged between the belt and pulley, which could otherwise cause rips and tears.
Return-side belt plow (v-plow)
In addition to external belt cleaners, self-cleaning tail pulleys are also useful in preventing material from getting pinched between the pulley and the belt, avoiding buildup and excess wear.
Various self-cleaning tail pulley designs are available on the market, including wing pulleys, chevron pulleys, spirals, and more.
Self-cleaning Tail Pulley (Wing Pulley)
While many manufacturers use only a self-cleaning tail pulley when fugitive material is a concern, FEECO recommends employing both the self-cleaning tail pulley and the v-plow for optimal protection of the tail pulley and belt.
Because of their design differences, steep incline conveyors cannot proficiently use any of the same components (belts or cleaners) as troughed or shuttle conveyors unless the angle is under approximately 20 degrees.
Pocket belt conveyors instead utilize special belting known as corrugated sidewall belting.
This style of conveyor belt contains material with corrugated sidewalls. Sidewalls are flexible enough to contain material and work with a variety of pulley sizes. The belting is available with a range of cover compounds for various types of handling, including standard, oil-resistant and heat-resistant.
Corrugated sidewall conveyors also employ cleats along the belt in order to contain material during vertical handling, creating pockets for material to rest in (it is for this reason that the steep incline conveyor is also frequently referred to as a pocket belt conveyor). Cleats can range in height from 1” – 6”, and can be either integrated or detachable.
Steep incline conveyors are limited in their cleaning ability, due to the special type of belting they use. For this reason, dry, less-adhesive materials perform better with this style of belt conveyor.
When some type of cleaning is necessary, producers employing a steep incline conveyor can enlist the help of a belt thumper.
A belt thumper is mounted to the underside of the belt on the return side of the conveyor. This mechanism creates a high-speed rotating action that causes the belt to vibrate, loosening and removing any material that may be stuck, before it reaches the feed location.
A conveyor belt tensioner, also known as the take up, is a key component in maintaining proper belt tension, which contributes significantly to process and mechanical stability; proper belt tension helps to ensure that the belt wears evenly, material is contained in the trough, and the belt runs centrally over idlers.
While a few types of take up are available for adjusting belt tension, the specific project parameters, along with customer preference, generally guide the decision on which type is best for a given application. The following covers the most commonly used types of tensioner/take up assemblies and when each type is most appropriate.
Belt tension is a substantial factor in conveyor operation; belt tension that is too loose can cause a number of problems, including mistracking, unpredictable behavior, fugitive material, and excessive belt wear or damage. Proper tension is also important in ensuring that the belt has enough friction to prevent slippage at the head pulley. Tension that is too tight can also cause mistracking, fugitive material, and excessive belt wear, in addition to belt “cupping” (when the edges of the belt curl up), and overstretching of the belt.
All conveyor belts will experience a certain amount of stretch. A general rule of thumb is to expect that a new belt will stretch an additional 2% of its total length. This stretch will add to the length of the belt, requiring any slack to be taken up in order to maintain proper tension.
The longer the conveyor, the greater the amount of stretch that will require take up. For example, a 20’ conveyor will only have around five inches of stretch to accommodate, while a 300’ conveyor will have to manage six feet of stretch.
Take up is also helpful when the belt requires maintenance, allowing the necessary amount of slack to be let out for operators or maintenance personnel to more easily make their repairs. When using a gravity take up, FEECO recommends including some additional belt length in the design. Including this buffer allows the ability for worn or damaged sections of belt to be cut out and re-spliced, rather than purchasing a new belt. This helps to minimize downtime and cost.
Take up assemblies are available in many different types and styles, each offering its own advantages and disadvantages. The primary types of belt conveyor take up are the screw (manual) take up, gravity take up (GTU), and horizontal take up.
The screw take up design utilizes mechanical force to take up any slack in the belt. This is done by adjusting a threaded tensioning screw integrated into the conveyor frame on each side of the tail pulley. By adjusting the screw, the tail pulley can be either pushed outward or pulled inward.
Since this requires manual adjustment of the assembly, this style is often referred to as a manual take up. Various styles of screw take up are available based on customer preference and the level of duty required.
FEECO prefers the telescoping take up screw. Another style, the top-angle take up, is also popular, but requires a much larger and heavier tail frame, as well as larger guarding.
Screw take ups offer a cost-effective means of managing belt tension for conveyors less than 150’ in length and are the standard take up choice.
Telescoping screw take-up on a FEECO Belt Feeder
Screw take ups are generally not suited to accommodate the length of belt stretch that occurs in conveyors longer than 150’ and in these settings, the gravity take up is usually the best approach to belt tensioning.
A gravity take up assembly utilizes three pulleys – two bend pulleys and one gravity take up or sliding pulley – to automatically manage belt tension. A counter weight attached to the gravity take-up pulley pulls down on the belt to maintain tension via gravity. The bend pulleys direct belt slack around the gravity take up pulley.
The entire assembly is incorporated into the bottom side of the conveyor frame and creates a constant tension on the belt. This self-tensioning setup allows the take up to simply adjust to spikes in load or tension as it “floats” below the belt conveyor. As such, a gravity take up assembly always maintains proper belt tension and avoids belt or take-up damage due to spikes in load or tension.
The self-tensioning nature of GTUs also means they require less maintenance than the screw take up. Maintenance is typically only needed when the belt reaches the end of its life, having stretched so much that the assembly has reached the bottom of the allotted travel distance (the ability to see where the take up falls in its allotted travel distance also provides a helpful visual cue to operators of roughly when maintenance may be needed). When this occurs, the conveyor belt will need to either be replaced or cut and revulcanized.
Because the gravity take up system adjusts automatically to changes in belt tension, it is also known as an automatic take up.
The horizontal take up is an alternative to the gravity take up when space is a limitation.
This type of take up is similar to the gravity take up, but instead of the assembly situated below the belt, it is positioned vertically behind the tail pulley. This makes it particularly useful in situations where the conveyor is positioned on a grade that eliminates any additional space under the conveyor.
Since the horizontal take up does not fall below the conveyor, a system of pulleys and cables is used to tension the belt with a weight box. The cabling attaches to the tail pulley, which rides on a carriage, allowing it to be moved in and out of place.
The image above shows a horizontal take-up: on the left, the tail pulley and carriage are installed on the inside of the building; and on the right, the weight box (behind guarding) is installed in a structure that will direct the cabling through pulleys (at the top) outside of the building (cables not yet installed).
As the driving power behind a troughed belt conveyor, the drive assembly is a critical component in a conveyor’s ability to perform reliably and efficiently in the long term.
Also known as the drive arrangement, the drive assembly is what supplies the torque to create the necessary motion for the pulley to move the conveyor belt. The drive assembly consists of several components, but is primarily considered as the motor and reducer.
Selecting the proper drive assembly for the intended application is essential to minimizing downtime, streamlining maintenance procedures, and ensuring optimal belt conveyor performance. What follows is an overview on the types of drive assemblies available for industrial belt conveyors, as well as some of the considerations to keep in mind when designing or purchasing a new belt conveyor or other bulk material handling equipment.
As a key contributor to industrial conveyor performance and longevity, as well as overall efficiency, selecting the right drive assembly for a given task is crucial. Troughed belt conveyors and other bulk material handling equipment are tasked with a variety of jobs throughout various industries, from handling wood chips and biomass, to transporting ores, fertilizers, and more.
This diverse set of handling requirements necessitates an equally diverse solution to powering a belt conveyor; a drive assembly for a conveyor handling shredded paper has significantly different needs than one designed for ore handling at a mine site. As such, drive assemblies are available in a variety of configurations, each suited to different demands.
Selecting an under-powered drive assembly will eventually require replacement of the unit with something more adequate. Selection of an overpowered drive assembly may seem like a safer option, but incurs substantially higher operating costs over time. Additionally, since cost increases with horsepower requirements, larger drive assemblies require a greater capital investment, making an oversized drive assembly a costly alternative.
Belt conveyors allow facilities to keep production moving. This necessitates two key criteria that industrial conveyor drive assemblies must offer:
Plant operators demand a high level of reliability from their conveyor assemblies. If the drive assembly isn’t reliable, it can cause a process upset, holding the entire operation hostage and resulting in material backlogs and other problems.
As bulk material handling systems must work tirelessly, often without stopping for months at a time, drive assemblies must remain dependable for long-term operation.
Reliability is often achieved by selecting a reputable handling equipment supplier that has the expertise to size and design the drive assembly according to the precise demands of the application, ensuring the unit is fit for the level of duty in the long-term.
Factors such as the hours of operation, material bulk density, whether or not the unit will be started under load, how frequently the unit will be cycled (started and stopped), as well as environmental factors such as plant elevation, ambient temperature, humidity, and more, will all influence drive assembly design.
While conveyor drive assemblies generally require minimal maintenance, they do depend on regular upkeep such as routine oil changes and visual inspections, as well as temperature and vibration monitoring systems to ensure long-term reliability. For this reason, drive assemblies must be easily accessible to maintenance personnel, allowing them to conduct any necessary procedures or troubleshooting safely and without issue.
Drive assemblies are made up of moving parts such as rotating shafts and couplings that require proper guarding to minimize the potential for injury. High-speed V belts also require guarding.
Drive assemblies should be designed to be as energy efficient as possible to minimize unnecessary energy costs. As mentioned, selecting an overpowered drive assembly may seem like a good option, but can incur much higher operating costs over time.
FEECO utilizes several base model drive assemblies as a platform for creating custom drive assemblies suited to the specific project demands of the application at hand. As FEECO designs bulk material handling equipment for everything from specialty chemicals to mineral processing, we start with already-robust drive assembly configurations. Typical industrial conveyor drive assemblies include the following:
The Torque Arm type of reducer is a shaft-mounted reducer with top motor mount and high-speed V belts. This reducer is an excellent fit for a broad range of applications requiring an average reduction ratio.
An alternative is the Motorized Torque Arm, a shaft-mounted reducer that utilizes a right angle C-face motor mount (this replaces the top motor mount and high-speed V belts with a directly connected motor).
The Shaft-Mounted Reducer with Inline Motor offers a suitable option for high horsepower and/or high reduction reducers (common in belt feeder designs).
For applications requiring low horsepower but high reduction, FEECO employs a “gearmotor” type arrangement.
In addition to the many standard designs available, there are also many ways to further customize the drive assembly to the specific demands of the application at hand.
A backstop device is employed in order to prevent the load from reversing direction when the motors are switched off.
VFDs, or Variable Frequency Drives, allow operators to control motor speed as needed.
Vibration and heat/temperature sensors are optional components that are becoming more standard, as they are effective in promoting reliability and longevity of drive components.
Most reducers are of the shaft-mounted design. However, in applications where an especially heavy reducer is utilized, a swing base is often used to reduce the weight load. A rigid low-speed coupling is also typically used in such settings.
In lieu of a shaft-mounted reducer, a foot-mounted reducer can also be utilized. In this case, the reducer is fully supported by the drive base.
While drive assemblies can be installed at either the head or tail end of the conveyor, head end installation is typically preferred, as this “pulls” the conveyor belt, which is more effective than pushing. When space is limited, it is sometimes beneficial to install the assembly at a point along the conveyor (between the head and tail ends).
In some high-horsepower applications, it may be more economic to install two smaller drive assemblies as opposed to one large one.
While belt conveyors provide a reliable, efficient bulk handling solution, they can experience occasional problems. And when issues arise, they can wreak havoc on a production line. Below are some of the most commonly seen issues when working with industrial belt conveyors, including what causes these problems and how to prevent them.
Note: This is not a comprehensive list and does not substitute for the expertise of a professional. Always consult your original equipment manufacturer or manual to ensure all necessary safety, maintenance, and troubleshooting guidelines are followed. Maintenance and storage procedures should always be carried out by a trained professional. FEECO does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this guide and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage.
Carryback is the material that remains on the belt after discharge and is perhaps the most common struggle among conveyor operators. Typically all industrial belt conveyors experience carryback to some extent, but given its potential for serious consequences, keeping it to a minimum is essential.
Carryback creates a messy and potentially hazardous work environment, as it gets into the undercarriage and surrounding area of the conveyor. This can cause outages and increase the time devoted to cleaning and maintenance.
Not only does carryback create a mess, but material allowed to build up on rollers, idlers, and pulleys degrades these components, causing excessive wear. Further, a buildup of carryback can also cause belt tracking issues, potentially wearing and damaging the belt.
Carryback is largely a result of the conveyed material’s characteristics and propensity for sticking. In general, a material with a higher moisture content is more likely to stick to the belt. Similarly, carryback can be more of a problem in humid environments where hygroscopic materials pull moisture from the air, increasing the likelihood of sticking.
Sticking can also occur when condensation is produced as a result of extreme temperature differences between the material and the belt.
The best way to prevent carryback in industrial belt conveyors is to utilize one or more belt cleaners. Belt cleaners can be installed at both the head and tail pulley and ride against the conveyor belt, dislodging any material that may be adhered to the belt. These devices substantially reduce buildup on the belt, and depending on the level of carryback, several options may be appropriate.
Routine cleaning should also be prioritized as part of a conveyor maintenance program in order to minimize any remaining buildup on components.
Tracking, or training, refers to the way in which the belt rides on the rollers. Conveyor belts should always track centrally. Mistracking occurs when the conveyor belt rides unevenly on rollers, favoring one side over the other.
Material rides centrally on this properly trained FEECO belt conveyor
Like carryback, mistracking can cause several issues in an industrial conveyor system. This includes uneven belt wear, belt damage resulting from catching or rubbing on surrounding infrastructure, material spillage, warped belting or belts that are not square, and more.
Mistracking is also recognized as a safety violation by the US Department of Labor’s Mine Safety and Health Administration (MSHA). When a belt is not tracking properly, areas that are normally safe can become pinch points, presenting a hazard to workers. Mistracking can also cause material to fall off of the conveyor, falling on to workers and equipment, or creating piles that present a safety risk.
Since conveyor and belt alignment are carefully balanced, any number of factors may be the source of mistracking, making it difficult to identify the origin of the problem. Potential causes of mistracking in industrial belt conveyors include improper idler spacing, seized or worn rollers, a misaligned frame, material buildup on any part of the conveyor, excessive belt tensioning, and a worn or damaged belt, to name a few.
The range of possible mistracking causes make a blanket solution to prevention impossible. There are, however, measures that can help to reduce the potential for this issue to occur.
Belt conveyors can fall out of perfect alignment through normal wear and tear. As a result, routinely inspecting alignment of the conveyor structure and its many components helps to prevent mistracking. Off-center loading can also create an alignment issue, so ensure that chutes are positioned centrally over loading areas.
Since mistracking can be caused by material buildup, it’s also important to keep the belt conveyor, idlers, and pulleys clean. This will reduce wear on components, which could also cause mistracking.
Slight off-tracking issues can be remedied by “knocking idlers,” a practice in which idlers are skewed a small amount to correct an off-tracking belt.
Belt slippage typically occurs around the drive/head pulley and happens when the belt and pulley do not have enough grip to adequately turn the belt around the pulley.
Belt slipping reduces productivity and efficiency, causing process upsets, or preventing the proper amount of material from being conveyed. It can also cause belt wear and damage, and put added stress on the motor, resulting in premature failure.
There are several reasons why a belt experiences slipping. This includes:
There are several ways to prevent slippage when working with industrial belt conveyors. Maintaining an adequate belt tension is critical to preventing slippage. It’s important to note, however, that while over-tensioning the belt may seem like an easy fix, this should be avoided, as it can stretch and damage the belt, as well as put added stress on the motor.
When there is not enough grip between the pulley and the belt, consider installing lagging. Lagging is a material added to the surface of the pulley for increased traction.
Alternatively, a snub pulley may be installed. A snub pulley is simply an idler installed at a point which increases the arc between the belt and pulley to improve friction between the two.
Spillage, not to be confused with slippage, refers to any material that falls off of the conveyor belt into the surrounding area, whether that be at the loading zone, along the conveyor length, or at the discharge. Spillage can occur with both inclined and horizontal troughed belt conveyors for various reasons and is the most commonly encountered problem when working with belt conveyors. Managing spillage is a top priority for plant managers, as it is the cause of a number of subsequent issues.
The consequences of material spillage are numerous and have the potential to be severe and costly. The issues associated with material spillage from conveyors may vary depending on the setting, but in general, include:
Whether losing raw materials or finished product, even a small amount of lost material quickly contributes to profit losses and inflated operating costs. This may come in the form of spoiled or inferior product, reprocessing costs, or lost feedstock. Spillage is especially problematic when handling high-value materials or products.
In many cases, fugitive material can be a safety hazard. This may be because the material poses a toxicity or inhalation risk, creates tripping or slipping hazards for employees, or causes equipment to malfunction.
Not surprisingly, material spillage frequently drives up downtime and labor costs. Time and labor are often lost, whether that’s due to stopping the entire operation for a clean-out, managing fugitive material in the plant, addressing equipment issues caused by fugitive material, or otherwise.
Material spillage also frequently causes equipment degradation, especially if not carefully managed. Fugitive material has the potential to damage conveyor belts, idlers, and drive components, all costly parts to replace.
Damage may occur as a result of the material’s specific characteristics, such as its corrosiveness, or because material has been allowed to build up and cause interference between components.
In general, it is not uncommon to see some level of material spillage with industrial belt conveyors. Excessive fugitive material, however, likely indicates an underlying issue. There are a number of potential causes for spillage, but they can usually all be traced back to the equipment’s original design.
The root cause of conveyor spillage in any given bulk material handling system, if not overtly obvious, is best determined by a bulk solids handling expert. Common causes of spillage include:
Addressing conveyor spillage should begin with identifying the root cause of the issue, as this will dictate the best approach to resolve the issue. The FEECO Customer Service Team offers process and equipment audits to assess bulk material handling systems for mechanical problems, design issues, and general optimization. Common approaches to preventing spillage are outlined here:
Material spillage is more likely to occur at loading zones than along the length of the conveyor. Common ways to address spillage occurring at loading areas include:
Add a Skirt Board
Skirt boards help to minimize material by keeping it contained at the sides of the conveyor. In other words, skirt boards provide a place for material to ride against, as opposed to falling off the sides of the conveyor. Some conveyors experiencing problems may already have existing skirt boards, but they are not properly designed. For example, idlers may be spaced too far apart. In some cases, existing skirt board rubber may be worn, requiring replacement or adjustment.
Add an Apron Seal
An apron seal can be added to skirt boards as a way to further prevent fugitive material from escaping at the loading area. Integrated exhaust ports can also be added at the skirt board area for dust pick-off at loading.
Decrease Idler Spacing or Incorporate a Slider Bed
Spillage at the loading area can also be the result of a sagging belt, which creates gaps from which material can escape between the belt and skirt board rubber. This can be resolved by decreasing the space between idlers at the loading area until any sagging is mitigated. Typical spacing is one foot at load zone and two feet for the remainder of skirt boards. This helps to create a better seal between the belt and skirt boards.
To further minimize spillage, idlers can be replaced by a slider bed at the loading area, completely eliminating belt sag between idlers and therefore the potential for material loss.
FEECO Slider Bed for reducing material spillage at conveyor loading zone
Ensure Proper Feeding
Various feeding issues can exist that are likely to result in material spillage upon loading. Common feed issues include uneven loading (loading should be centered, not skewed to one side), a worn hopper (i.e., holes in the hopper or feeder that allow material to escape), inconsistent material flow or ratholing in the hopper, a feed rate that is too high, or a mismatch between feed rate and belt speed. All of these issues have the potential to overload the conveyor, either consistently, or intermittently. These issues must be specifically addressed, either through adjustments in the feedstock, modifications to or implementation of a new hopper, adjustment of feed rate or belt speed, or otherwise.
Spillage is especially likely when working with stringy materials such as wood chips or bark, as these do not flow and feed as cleanly as other materials. These types of materials often require special consideration when designing the conveyor load zone.
If you are looking for more details, kindly visit chip conveyor.
While material spillage is most common at loading zones, it can be an issue along the length of the conveyor if something is wrong. The cause, and ultimate resolution for spillage along the length of the conveyor is usually fairly obvious. Common ways to minimize spillage along the conveyor length include:
Increase or Decrease Belt Tension
A belt tension that is too high pulls and stretches the conveyor belt, preventing it from troughing properly and therefore making it unable to contain material as well. If belt tension is too low, the belt will sag between idlers, allowing material to fall off the sides. These issues are resolved by properly tensioning the belt.
Reduce Belt Load
Overloaded belt conveyors also cause spillage. CEMA recommends belt loading not exceed 75%. Operations consistently running beyond this should consider a means of either reducing belt load, or increasing available handling capacity through additional or replacement handling equipment.
Increase Angle of Idlers/ Trough Depth
Idlers can be adjusted to accommodate a variety of trough angles, typically 20°, 35°, and 45°. If the trough is too shallow, material may spill over the edges. By adjusting the idler angles to form a deeper trough, material can be better contained.
Remove Buildup
Excessive buildup is not only damaging to the belt and idlers, but it can also interfere with how the belt runs. Material that is allowed to build up on idlers, or at other points along the conveyor can cake, harden, and/or cause interference, causing the belt to run unevenly or erratically, spilling the material. By removing buildup, the interference is mitigated, though additional repairs may be necessary. Conveyors should be routinely cleaned when there is potential for buildup to occur.
Keep Belt Dry
In some cases, a wet belt could be the cause for spillage, as it can promote sticking or slipping of the material on the belt. This is often seen with unprotected belt conveyors operating outdoors, as they are subject to rain and frost, which can cause the belt to become slippery. Conveyors operating outdoors should utilize weather covers or gallery enclosures to protect the material and the belt. If the belt is operating indoors, identify the source of moisture and work to resolve it.
Add a Belt Cleaner
FEECO recommends belt cleaners on all conveyors as a preventative measure in reducing spillage and potential buildup.
Add Deck Plates & Drip Pans
Deck plates and drip pans catch falling material, and while they do not prevent conveyor spillage or address the root cause, they can help to keep spillage contained.
Any one of the aforementioned issues has the potential to cause serious problems: premature equipment failure, unexpected downtime, employee injuries, and more. Even if problems do not reach a high level of severity, however, they still represent unnecessary hazards and losses in productivity and efficiency. For these reasons, a preventative approach to conveyor problems is always the best policy.
Regularly inspect the conveyor system to look for signs of trouble: excessive material spillage, abnormal sounds, visual indicators, or other abnormalities. Always ensure that the equipment, as well as the surrounding area, are kept clean. Replace conveyor components that begin to show signs of wear.
By taking these measures, the potential for unexpected downtime and lengthy repairs is greatly reduced.
As we’ve already covered, problems encountered with troughed belt conveyors have the potential to injure employees, shut down the production line, and incur substantial costs in repairs and production losses.
Choosing a reputable industrial conveyor manufacturer and having a system designed around the unique needs of the specific handling application are the first steps in maintaining efficiency and prolonging equipment life, but even the best conveyors can still encounter issues through normal wear and tear or unforeseen production changes.
The ability to quickly troubleshoot an under-performing or stalled conveyor is crucial in minimizing downtime and preventing further damage and loss, but when a problem occurs, it can be hard to know where to start troubleshooting.
Fortunately, the rubber belt itself is often a reliable indicator, hinting at the underlying problem through wear pattern, running problems, and more. Use the guide below to quickly assess and resolve common industrial conveyor problems often exhibited in the belt.
Note: Once again, this is not a comprehensive list and does not substitute for the expertise of a professional. Always consult your original equipment manufacturer to ensure all necessary safety, maintenance, and troubleshooting guidelines are followed. Maintenance and storage procedures should always be carried out by a trained professional. FEECO does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this guide and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage.
During conveyor inspection, be alert for any abnormalities such as strange odors, leaks, sounds, or visual wear. Other potential indications of a problem include excess material spillage, process bottlenecks, a change in product quality, or other sign of underperformance. When troubleshooting, always follow all necessary safety measures.
Operators and maintenance personnel should be trained on the system so they are able to safely troubleshoot any issues that arise.
Potential Cause: When a conveyor belt runs off one side of the terminal pulley, this is most often an indication that something is not right with the pulley itself. Typically, this type of belt behavior results when the pulley is either not square with the axis of the belt, or when the pulley shaft is not level transversely. Material buildup, as well as worn or missing lagging can also cause this behavior.
Fix: To resolve this issue, confirm that the pulley shaft is level horizontally. Use several idlers (carrier or return) prior to the pulleys to train the belt. Improve cleaning procedures if buildup is an issue and replace worn or missing lagging if necessary.
There are many possible reasons why a belt runs toward a particular point on the frame:
Potential Cause: Idlers prior to the point of trouble may not be square with the frame.
Fix: Minimally advance the end of several idlers on the run-out side.
Potential Cause: The conveyor frame may be either out of alignment, or is not transversely level.
Fix: Use a string to check alignment along the length of the conveyor. Use a level to check alignment across the width of the frame. Adjust alignment as needed.
Potential Cause: There could be material buildup on idlers and return rollers, or idlers may be damaged or frozen.
Fix: Improve maintenance practices and/or install a cleaning device such as a belt cleaner.
Potential Cause: The terminal pulley may be out of alignment.
Fix: Check and adjust both terminals.
Potential Cause: Spilled material may be forcing the belt to move to one side.
Fix: Find and correct the cause of spillage.
Here again, there are many factors that may cause an entire conveyor belt (or long section) to run to one side:
Potential Cause: The structure may be out of alignment, or not level transversely.
Fix: Check and correct.
Potential Cause: It’s possible the belt is not cut and spliced squarely. Similarly, the belt could be bowed as a result of poor storage conditions.
Fix: In the case of new belt conveyors, operate under the full load tension for the “break-in” period. If condition persists, a new, higher-quality belt may be required. For bowed conveyor belts, a complete replacement is necessary.
Potential Cause: Material is being loaded on the belt conveyor off center.
Fix: Correct the cause at loading point.
Potential Cause: Belt is tensioned improperly.
Fix: Adjust the pulleys as needed.
Potential Cause: The belt may be too stiff to train. Alternatively, improper belt tension could also be causing the belt to run improperly.
Fix: Check quality manufacturer of belt for proper specifications on conveyor. Check belt tension and adjust pulleys as needed.
Potential Cause: Twisting of frame on portables and stackers.
Fix: Brace loading hoppers so load and loading stresses do not allow frame to twist out of line. Adjust belt tension.
When a belt is exhibiting extensive stretching, there are two primary causes:
1.Belt tension is too high.
Many factors can cause the tension to be too high, and as such, there are many potential ways to resolve the issue:
2.Belt construction is too light.
To confirm that belt construction is too light, check the tonnage capacity and belt tension against the belt specifications. The fix in this case is to replace the belt with one of adequate specifications.
Potential Cause: Idlers may be sticking, or the impact or load zones may be worn. Overloading could also be occurring.
Fix: Replace bad rolls. Improve maintenance practices. Reduce loading if necessary.
Potential Cause: Material is being allowed to spill onto the return belt.
Fix: There are many potential ways to resolve spillage of material on the belt. This includes:
Potential Cause: The head pulley fasteners could be protruding.
Fix: Replace worn lagging.
Potential Cause: Slippage may be occurring on the drive pulley.
Fix: Use rubber lagging on the drive pulley. Use grooved or herringbone type. If needed, install a snub pulley to increase drive pulley contact.
Potential Cause: Similar to the previous issue, breaks in the carcass could indicate a loading impact from sharp lumps.
Fix: Reduce the loading impact and employ impact idlers or bed.
Potential Cause: The chosen belt is not a good fit for the application.
Fix: Replace the belt with one better suited to the application.
Potential Cause: It’s also possible that material is getting between the belt and the pulley.
Fix: If this is the case, improve maintenance practices to reduce fugitive material between belt and pulley.
Potential Cause: Belt edges may be “folding up” on structure at or near pulleys.
Fix: Retrain belt properly.
Potential Cause: Material is jamming under the hopper or skirt boards.
Fix: Adjust for proper clearance and relief.
Potential Cause: The final idler is too close to the head pulley or too high.
Fix: Adjust final idler location or height.
Potential Cause: A sharp, convex curve is present in the system.
Fix: Adjust to a more gradual curve.
Potential Cause: When a belt exhibits wear at the edge, it is often a sign of misalignment, which can allow the belt to run out of line and rub against a structure.
Fix: Follow OEM recommendations for correcting belt alignment. Retrain as needed.
Potential Cause: Fastener plates are too long for the pulley size. (For mechanical splice only)
Fix: Use correct lacing and/or use larger pulleys.
Cupping occurs when the edges of the belt curl up. Cupping is expected as a part of normal wear and tear over time, but excessive cupping could be an indication that something is wrong. There are many reasons why a belt may exhibit excessive cupping:
Potential Cause: The belt may be over-tensioned.
Fix: Reduce take-up tension or counterweight on gravity take up. Check for drag from stuck idlers. Reduce loading rate or increase belt speed to reduce tension. Make certain that the belt is adequate for the tension requirements.
Potential Cause: Deep trough idlers and a low elasticity in belt fabric are causing high tension.
Fix: Use adjustable transition idlers at terminals for longer transitions between deep trough and pulleys. Use belting with moderate stretch. Ensure proper transition distances.
Potential Cause: Belt has been stretched or is worn out.
Fix: Replace belt.
Potential Cause: The top cover is too heavy for the thin-ply belt.
Fix: Consult a quality belt manufacturer.
The hardening and/or cracking of a rubber conveyor belt is a result of exposure to heat. To resolve the issue, use a Neoprene hot material belt. Use oil for lubrication.
Potential Cause: Spilled oil or grease are or have been on the belt.
Fix: Locate the source of the spill/leak and improve housekeeping practices.
Potential Cause: The troughing idlers may be over-lubricated.
Fix: Again, improve maintenance practices.
Potential Cause: There may be oil in the material.
Fix: Remove the source of oil if possible. If this is not an option, replace belt with the proper oil-resistant covers for the application.
Potential Cause: When the cover is exhibiting cutting or slashing, this could be a result of sharp material impact.
Fix: If this is the case, impact idlers, load tables, or cradles can be added. Some narrower belts or those with lighter loads may require a softer drop zone (no horizontal idler) at the load area. The chute design could also be modified to allow for better delivery of the material to the belt. A slope could also be added to the chute to allow material to slide onto the belt more gently.
Potential Cause: Tramp iron or other material could also be causing the cutting/slashing.
Fix: Use a metal detector or overhead magnet above the head pulley.
Again, one of any number of factors may be at play, causing wear on the top cover:
Potential Cause: Hopper or skirt board rubber is too stiff where pressed.
Fix: Use pliable skirt board rubber (not old belt) and adjust properly, adjust skirt seals of minimum clearances, and/or install slides in place of outer troughing rolls.
Potential Cause: There may be a gap between idlers at the loading point, allowing material to grind between the belt and flashing.
Fix: Space idlers more closely at the loading point and adjust to proper clearance.
Potential Cause: Skirt board metal is too close to the belt.
Fix: Adjust to proper clearance.
Potential Cause: The width between skirts is too narrow.
Fix: Widen spacing and taper the opening in the direction of belt travel.
Potential Cause: Belt deflects at the loading point allowing material to jam between the seals and belt.
Fix: Use loading hopper with slides for belt edges, or shift the idler or chute so that loading impact is just ahead of the idler.
Potential Cause: Material is jamming against belts at the head pulley in full bin or plugged chute.
Fix: Add plug chute switches, or observe more careful operation.
If top cover wear is excessive, there could be another reason for the issue, such as:
Potential Cause: Return rolls may have a build up of material, causing them to stick.
Fix: If rolls are stuck, they will require repair or replacement. For dirty return rolls, install rubber disc returns. Ensure belt cleaners are functioning properly. Retention/replace belt scrapers where necessary.
Potential Cause: The belt may be dragging through spilled material.
Fix: Improve cleaning and housekeeping procedures.
Potential Cause: Loading conditions are poor (ex., side loading).
Fix: Improve chutes and hoppers.
Potential Cause: The cover may be of a low tensile rating.
Fix: When replaced, use a higher quality, and possibly heavier cover.
Potential Cause: There may be excessive sag between idlers caused by shifts in the load. Belt tension may be too loose.
Fix: Adjust pulleys to retention belt.
Any observed abnormalities in an industrial conveyor system should be addressed immediately in order to avoid excess damage or failure. When the source of the problem is unclear, consult the OEM or other qualified service expert.
Routinely inspect the conveyor to catch problems before they have a chance to escalate. Having the OEM or other service technician conduct regularly scheduled conveyor inspections will also help to catch any potential problems early. The frequency of recommended inspections varies per operation, ranging from a couple times per year, to monthly in especially demanding cases.
Production plants in every industry rely on industrial conveyor systems to keep their operations moving. Selecting the right type of industrial conveyor, configuring it for optimal performance and longevity, and knowing how to address issues quickly, efficiently, and safely are all essential to maximizing uptime.
As a leader in custom bulk material handling equipment, FEECO not only offers incredibly robust, high-performance conveyors and handling systems, but we also have the expertise to guide customers in selection, as well as ongoing maintenance and troubleshooting. For more information on our conveyors or related services, contact us today!
A conveyor system is an apparatus designed to transport packages, products, supplies, parts, and equipment for varied purposes including manufacturing, distribution, or repositioning. Examples of conveyor systems encompass pneumatic, screw, belt, and roller types. The design and configuration of each system are contingent upon the characteristics of the materials being conveyed, such as their weight, size, and ease of movement.
While conveyor systems are vital in material handling and production, their use extends to various manufacturing applications such as sintering, component and assembly finishing, and part washing processes. These systems generally operate automatically, yet there are also manual designs employing chutes and rollers, which are frequently seen in retail, material handling, and shipping sectors.
A conveyor system can be integrated into an operation in numerous ways to boost efficiency, productivity, and operational speed. Before deciding to install a conveyor system, it’s crucial for facility managers and logistics specialists to consider several important factors. Each conveyor system is designed and engineered to meet the specific demands of its intended application, whether for industrial automation, warehousing, distribution, food processing, or packaging operations.
Conveyor system manufacturers assess the available floor space and facility layout to determine the optimal system design. This process involves identifying interaction points with other equipment, required clearances for safety and maintenance, potential obstructions, and any areas that could hinder material flow or workplace ergonomics. While automated conveyor systems are the most common in modern manufacturing and distribution centers, the specific application—such as assembly lines, order fulfillment, or pallet handling—will dictate whether the conveyor solution should be motorized, powered, or manual (gravity-fed). Taking space constraints into account ensures the chosen conveyor type, such as belt conveyors, roller conveyors, or overhead conveyors, can be efficiently integrated into existing operations.
After the system layout and pattern have been established, the next step is to determine its maximum material carrying capacity. Overloading the conveyor can lead to belt slippage, excessive wear, premature failure, or operational interruptions. Factors influencing load capacity include the overall conveyor length, bed width, weight of items to be conveyed, drive system torque, and the type of conveyed materials (fragile packages, bulk goods, etc.). Proper calculation and selection protect both the conveyor equipment and the conveyed products, ensuring compliance with key industrial handling standards.
The speed of a conveyor system is a critical parameter, measured in feet per minute (fpm). The average conveyor speed for most material handling applications is 65 fpm, which roughly matches the walking pace of a person carrying a 50 lb package. However, conveyor belt speed requirements can be customized based on process demands—higher speeds are often required in high-throughput distribution centers or automated sortation systems, while gentle conveying may be preferred in food processing or product assembly lines. Adjusting conveyor speed allows operators to synchronize product movement with upstream and downstream processes, improving overall system efficiency and throughput rates. When planning conveyor automation, consider the effect of acceleration, deceleration, merging, and diverting on speed requirements for optimal productivity.
Handling powdered materials, liquids, or slurry mixtures involves unique parameters compared to conveying systems for solid and bulky items. A well-designed powder and liquid conveying system, such as pneumatic conveyors, tubular drag conveyors, or flexible screw conveyors, must be adequately sealed to prevent material leakage or contamination. The movement of powdered, granular, and chip-type materials often results in dust accumulation, which must be addressed with proper dust control, filtration, and venting systems—critical for regulatory compliance and maintaining air quality. Careful selection of conveyor belt material, surface coatings, and system construction is essential to minimize material buildup and support sanitation requirements in industries such as pharmaceuticals, chemicals, and food processing. Proper analysis of particle size, moisture content, abrasiveness, and flow properties ensures the safe, efficient transfer of loose bulk materials with minimal maintenance and downtime.
Conveyor systems are engineered in a wide variety of shapes, designs, sizes, and configurations to fit different facility requirements and material handling needs. They can be vertical conveyors (elevators), angled, horizontal, curved, modular, or equipped with special attachments such as cleats, buckets, slats, rollers, or z-frames for incline or decline operations. Specialty curves, compact footprints, and modular conveyor sections support integration into complex production environments and warehouse layouts. Each conveyor configuration is tailored to specific applications—whether for bulk material handling, pallet conveying, accumulation, or sortation—making the possibilities nearly limitless. By consulting with experienced conveyor manufacturers and system integrators, businesses can develop custom conveyor system layouts that optimize space, reduce bottlenecks, and support future expansion or automation upgrades.
The drive in an automated conveyor system supplies the mechanical power to move products along the conveyor pathway. It consists of components such as motors, gearboxes, drive pulleys, couplings, and a counter bearing to ensure smooth and continuous belt or chain movement. Conveyor drives can be engineered for forward and reverse operation and may be installed at the tail, head, or center of the system. Overhead conveyors and heavy-duty systems often utilize chain, sprocket, or cable drives. For liquids, slurries, and bulk solids, conveying systems may incorporate pneumatic blowers, vacuum conveyors, or helical screw drives. Selecting the appropriate conveyor drive system is critical for optimizing energy efficiency, minimizing downtime, and ensuring compatibility with controls and automation protocols (such as PLC or VFD integration). Regular maintenance and drive system inspection help prevent failures and extend conveyor service life.
Drive systems can feature single-speed, multi-speed, or fully variable-speed designs to accommodate diverse materials and operational demands. Modern conveyor systems increasingly rely on variable frequency drives (VFDs) and smart motors, which enable precise adjustment of material flow rates and support dynamic changes in throughput. Incorporating advanced drive control technologies aligns conveyor operation with Industry 4.0 objectives and enhances process flexibility for competitive manufacturing environments.
Safety is a foundational requirement for any conveyor system installation. Hazards such as pinch points, moving parts, and electrical controls demand robust safety measures to protect operators and maintenance staff. Modern conveyor safety features include emergency stop buttons, safety guards, interlocking electrical controls, warning signage, and lockout/tagout (LOTO) capabilities. Additional best practices involve proper training for machine operators, routine safety inspections, and adherence to OSHA and ANSI conveyor safety standards. The image below shows essential features: the emergency stop button, keyed motor activation, and clear visual symbols for conveyor operation. Investing in conveyor system safety reduces workplace injuries, equipment damage, and unplanned downtime, supporting continuous, reliable operation in high-volume production, packaging, and distribution environments.
In addition to the primary requirements outlined above, evaluating specific conveyor system features can help organizations choose the right solution for their needs. Consider environment factors (temperature, humidity, risk of corrosion), sanitation requirements for food-grade applications, system scalability for future expansion, and ease of maintenance for minimizing downtime. Assess the compatibility of control systems with existing automation infrastructure, and prioritize energy-efficient designs to reduce operational costs. When researching conveyor solutions, request detailed product specifications, ask for case studies or references, and collaborate with experienced conveyor system manufacturers to ensure optimal performance and return on investment.
Conveyors come in a wide range of types, designs, and processes. The most common types include belt, roller, and overhead conveyors, which fall into two main categories: overhead and floor-mounted. Conveying systems offer numerous benefits and are a standard component of large-scale operations.
Belt conveyors are the most common and straightforward type of conveyor and can operate at variable speeds. They consist of a moving belt mounted on a steel frame that supports both the belt and the materials being transported. If the belt is supported by a frame underneath, it is known as a sliding style. When the belt is supported by closely spaced rollers, it is referred to as a roller belt style.
Gravity roller conveyors consist of a series of evenly spaced rollers attached to a side frame. These rollers create a surface for placing materials for movement. When the conveyor is tilted or angled, materials move by gravity. While gravity roller conveyors can handle items of varying sizes, care must be taken to prevent larger materials from colliding with smaller ones. These conveyors are commonly used by shipping companies for loading and unloading trucks.
Chain conveyors can feature one or multiple sets of chains that come into contact with the bottom of the items being transported. Materials rest on these chains as they move. Chain-driven conveyors are well-suited for items with uneven bottom surfaces or those that are very heavy. They can support pallets placed directly on their robust frames. Due to the nature of the items they handle, chain conveyors typically operate at a slower pace.
Motorized roller conveyors utilize motors positioned along the conveyor frame to power evenly spaced rollers. This design resembles a gravity conveyor but includes the addition of motors. The number of motors depends on the load being moved and the overall system design. Rollers are connected by either a chain or belt. Some systems are equipped with sensors that start and stop the motors to prevent pieces from bunching together.
Slat conveyors are designed similarly to chain conveyors but use flat slats connected to the chain instead of a belt. In this way, they resemble belt conveyors, with slats serving as the conveyor surface in place of the belt.
Slat conveyors are similar to chain conveyors, but they use flat slats connected to the chain instead of a belt. This design makes them comparable to belt conveyors, with slats providing the conveyor surface in place of the belt.
There are various types of overhead conveyor systems, each with a distinct design but serving similar functions. The primary purposes of overhead conveyors are to optimize floor space and facilitate the efficient and easy movement of parts and components.
Enclosed Track Conveyor - An enclosed track conveyor features an enclosure that fully covers the trolley connectors, leaving only a small gap for trolley movement. This design protects the track from wear and simplifies the incorporation of bends and curves into the system.
Open Track Conveyors - Open track conveyors use I-beams as the track and do not have an enclosure covering it. They are easy to install and are well-suited for long, straight configurations.
Chain overhead conveyors use a continuously powered chain that travels along a track. Pendants are attached to the chain at regular intervals, allowing parts or products to hang from them. In other designs where pendants are not used, pusher dogs can move trolleys along a second track positioned below the chain track. This configuration is known as a power and free system.
Monorail conveying systems use carriers to transport materials over long distances and are ideal for this purpose. The rails are suspended from the building structure and receive power through signal lines from conductor lines embedded within the mounted rails. Monorail conveyors effectively utilize overhead space in the production area. In some designs, the carriers can lower to the production level and then rise out of the way when not in use.
Power and free conveying systems are designed to transport parts through production and assembly processes. Items move from one workstation to another, stopping at each station for work before continuing to the next. This type of system is a specialized form of overhead conveyor system.
The distinctive design of power and free systems enables products to be buffered along the conveyor path, start and stop automatically, and offers high versatility and adjustability. Unlike continuous flow chain conveyors, power and free systems allow for individual loads to be halted for adjustments.
Inverted conveyors are floor-mounted and can function as power and free conveyors. They typically use a drive system that does not rely on belts or chains.
Paternoster conveyors are a vertical conveying system featuring equally spaced load carriers connected to a chain drive, operating in a continuous loop. They are also referred to as platform conveyors.
Chute conveyors consist of a smooth, flat surface made from wood, metal, or plastic, angled within a frame that can be straight, spiral, or circular. Items slide down the surface due to gravity.
Screw conveyors are used to transport bulk materials such as granular products, chips, and loose substances. They feature a rotating helicoid mounted on a shaft inside a pipe. Also known as auger, helix, or spiral conveyors, screw conveyors have blades designed to lift the material upwards.
Pneumatic conveyors move bulk materials using pressurized air to push the material through a sealed pipeline. As the pressure increases within the pipeline, powders or granular materials are lifted and transported through the pipe.
A vibrating conveyor utilizes vibrations to move materials along a trough, making it suitable for items like grains, various solids, vegetables being harvested, and quarried rocks. The vibrations create a gentle, continuous motion that transports products through the conveyor. Each type of vibratory conveyor is designed for its specific application, with significant differences between those used in mining and those designed for harvesting or food production.
One of the major advantages of vibrating conveyors is their outstanding performance in the harshest conditions and environments.
A chain on edge conveyor is a single-strand chain conveyor that operates on its side, utilizing a roller chain that moves within a plate-supported channel. This design allows the chain to flex along the horizontal axis, enabling it to navigate horizontal turns and vertical curves. The ability to make various twists and turns makes the chain on edge conveyor more versatile than traditional chain-driven conveyors.
Skid conveyors are a type of floor-mounted conveyor that moves products on fixtures equipped with longitudinal runners known as skids, allowing movement both longitudinally and transversely. Key elements of a skid conveyor system include power rollers, pivot tables, shuttle carriages, and two-strand chain systems. These conveyors are appreciated for their efficiency and quiet operation. Variations in skid conveyor systems arise from the diverse components and control systems that can be incorporated.
A friction conveying system employs a motor to drive a friction wheel made of non-metallic material, generating the driving force. The system includes a friction drive, load-bearing track, switch, stopper, trolley, elevator, and steel structure. Friction conveying systems offer a safe alternative to power and free systems, providing the advantages of cleaner and quieter operation. They feature a flexible layout, modular construction, easy speed adjustment, straightforward expansion, and a low overall cost.
The primary purpose of friction conveying systems is to support operations with high production rates. Depending on their design, these systems can be inverted or overhead. They transmit force directly to a skid, slide, pallet, or carrier using a friction wheel.
Conveyor systems are a crucial component of a larger production process. To understand how a system functions, it's essential to examine all aspects of the overall production process and how the various components interconnect. Much of the system's functionality is established during the design phase. Once operational, the system's intricate mechanics become vital to the efficiency and success of the operation.
To narrow the discussion on conveying systems, the information below focuses on belt conveying systems, as they are the most commonly used.
Belt conveyors operate using motorized pulleys with a thick, durable belt looped around them. When the motor is activated, the belt is pulled between the pulleys.
The support system ensures the belt moves smoothly by holding the material without sagging. During the design phase, the weight capacity of the frame is determined, and the frame is constructed to meet the operational requirements.
Conveyor belt systems typically include at least two pulleys: a drive pulley and a tail or return pulley. Positioned between them are idler or dummy pulleys that are driven by the belt. The drive pulley moves the load, while the tail pulley returns the belt. As illustrated in the diagram, idler pulleys play several roles in guiding the belt, including controlling its tension.
The purpose of a belt cleaner is to remove any carryback that remains on the belt after the load has been discharged. Carryback is a common issue in all belt systems and is a major cause of belt malfunctions.
The drive for the belt can be located in various positions in the conveying system. For most belt conveyors, the drive is located at the discharge or head of the belt. Other locations can be anywhere along the belt depending on the design. AC motors are generally used to power the pulley that moves the belt.
As automation and production technology have advanced, conveyors have quickly become a crucial component in material processing and movement, significantly enhancing the speed of various production operations.
Sintering is a production process that heats a material just below its melting point to shape and form it. Conveyors are used to transport the material into high-temperature furnaces for the sintering process.
A packaging conveyor is designed to assist with product packaging, such as placing finished products in containers, efficient labeling, or preparation of products for shipping. The function of a packaging conveyor system is to move products from completion and assembly for shipment. They provide a safe method of moving materials and avoid the need for employees to carry heavy items.
A production line conveyor is designed to bring work to workers, eliminating the need to move the assembly crew. The advantages of a production line conveyor include efficiently moving products through each step of the assembly process, allowing tasks to be performed effectively. Raw materials enter at the start of the assembly process and are transformed into a completed product by the end.
The pharmaceutical industry needs specially designed conveying systems that can be installed in sterile environments while remaining flexible, reliable, and easily accessible to prevent contamination. Pharmaceutical conveyors handle products moving in and out of sterilization processes that use toxic chemicals, necessitating the use of materials that can withstand such exposure.
The growing demands in metal production have led to an increased use of conveying systems to boost productivity and efficiency. Conveying systems enable precise and accurate completion of various metalworking processes. They accelerate cutting and molding operations, facilitating the rapid production of large quantities of products. Press-out conveyors, in particular, are used to remove molded pieces from the pressing line or transfer them to other operations.
While airports use people-moving conveyors, the primary conveying system is designed for luggage handling. This system streamlines the process of transporting luggage from the check-in counter to the airplane and from the airplane to the baggage claim area. These highly sophisticated and complex systems minimize manual handling and efficiently move packages and bags. Airport conveying systems include various types, such as angled, vertical, and horizontal conveyors.
Conveyors are crucial for mining operations, efficiently moving raw materials while withstanding harsh conditions. Since many mining sites are in remote locations difficult for trucks to access, mining conveyors eliminate the need for truck access roads. Although mining conveyors come in various sizes and lengths, most are inclined and handle several tons of material. To prevent spillage or gaps, they must be evenly loaded. Depending on their design, they can operate at speeds of up to 100 feet per minute.
The automotive industry employs various types of conveyors for material handling, facilitating the movement of parts and car bodies between operations. These conveyors are particularly effective for transporting heavy items like doors, bumpers, chassis, and frames.
Food conveyors transport food and organic materials efficiently and cost-effectively compared to manual labor. The term "food conveyor" encompasses various systems, including rollers, belts, and dumpers, used to move food products through the manufacturing process. Like all conveying systems, food processing conveyors are tailored to meet the specific needs of the manufacturer and application. What sets them apart is the need to comply with stringent governmental regulations for sanitation and cleanliness.
Printing conveyors, used in screen printing, employ conveyor dryers to dry screen-printed materials. While other drying methods exist, conveyor dryers are preferred for high-volume production and come in various types. During the drying process, hot air is applied to the garment at a controlled temperature and with an even flow as it moves along the conveyor system.
Conveyors have become integral to manufacturing, mining, production, and finishing operations. They enhance efficiency, reduce labor costs, and contribute to higher volumes and increased production. Additionally, conveyors help prevent injuries by automating material handling tasks.
Regardless of the industry, conveyors have consistently proven to enhance production processes.
Materials can be moved quickly and easily from one location to another or between different levels.
Materials can be continuously loaded and unloaded over extended periods without interruption or stoppage.
Conveyors can be designed to automatically unload materials, eliminating the need for manual labor.
Conveying systems feature speed controls to regulate the rate at which items move, reducing concerns about handling issues or breakage.
While older conveying systems could only move in one direction, modern conveyors equipped with CNC controls can move both forward and backward, allowing for greater flexibility in adjusting manufacturing operations.
TMost conveyors require minimal maintenance; however, some types with motors and components need regular checks and replacements. Maintenance needs vary based on the conveyor's usage and operating environment.
Conveyors are the safest method for transporting materials through a facility or production floor. They are equipped with built-in on/off switches, emergency stop buttons, and speed controls. The image below shows a safety cable stop for conveyors.
Conveyors are integral to automated systems, capable of moving hundreds or even thousands of tons of material per hour or per day.
Continuous use of a conveying system can lead to various malfunctions. Many of these issues can be prevented through regular maintenance checks.
Mistracking, also known as belt drift, occurs when the belt shifts to one side. A misaligned belt can cause significant damage through uneven wear or by damaging items on the belt. The image below shows a belt that has drifted to the left.
Mistracking issues may be linked to a seized roller, which can cause sharp edges and potentially shut down the system. As conveyor systems are typically made of metal, a seized roller can develop these sharp edges.
Slippage on a belt conveyor can happen if the tension is either too high or too low, leading to belt stretching and subsequent slippage.
Conveyor systems are designed to operate continuously without interruption or stoppage. Any form of blockage can be damaging to the system and lead to major repairs.
There are several types of carryback, with the most common being when material adheres to the belt and continues past the transfer point before falling off. An example of carryback is shown at the bottom of the image below.
When a belt conveyor is overloaded or overly packed, materials can spill off the sides. This issue may arise due to inadequate employee training or problems upstream in the system.
Unload problems arise when material does not flow correctly from the conveyor at the offload point, potentially causing the entire system to shut down.
Pneumatic blower packages are highly reliable and typically have a long operational life. The first indication of a problem is often a change in system pressure, which can signal issues such as feeding problems, buildup in the line, uneven feed, or a clogged pipe. In most pneumatic conveying systems, potential problem areas include the blower package, conveying line, bin vents, filter, or airlocks. The image below shows product buildup in the line.
Fatigue in a screw conveyor occurs when material accumulates in the pipe as the conveyor turns. A gap always exists between the pipe wall and the screw blades, where material collects and hardens. As the screw turns, this material breaks up and moves along in solid form. Occasionally, solidified material can remain, causing the screw to work harder and placing additional strain on its centerline.
Although a conveying system may appear to be a single machine, it is actually a complex system of interconnected components that rely on each other to function effectively. To maintain a conveying system and prevent issues, it is crucial to inspect each individual component and understand its role in the overall operation.
Deciding to replace a component in a system involves several cost factors, including system downtime, sourcing the correct component, and hiring a specialist for the replacement. These expenses can be mitigated through regular maintenance and monitoring of the system.
The motor is a crucial component of a conveying system. Most motor failures are due to issues with bearings and windings, with bearings being the primary cause. Bearing failures are often related to lubrication problems, which can be prevented through regular maintenance and lubrication. Additionally, the motor's temperature should never exceed its recommended operating range.
Pulley bearings are fully lubricated to protect against water and contaminants. When regularly inspected and maintained, they typically do not require repairs. Manufacturers recommend scheduling maintenance based on the frequency of system use.
Regardless of the system type, regular cleaning is crucial. Belts, rollers, chains, motors, slats, and all accessible areas should be cleaned routinely. This is particularly important for systems handling products with treatments or coatings, as these substances can lead to contamination and potential damage to components.
Premature wear on belt conveyors can result from improper belt tracking, which should be checked each time the belt is activated. Issues with belt tracking may arise from misuse, environmental factors, or inadequate maintenance. Neglecting these aspects can lead to costly repairs.
Many conveying systems include pneumatic components. Regular maintenance should involve adjusting pressure, flow control, and regulators as needed. It is crucial to maintain pipeline pressure according to system specifications, as excessive pressure can damage individual components.
Conveying systems can be affected by stray voltages, which may short-circuit the system. Proper grounding can help prevent this issue.
The Occupational Safety and Health Administration (OSHA) offers guidelines for operating conveying systems, while the American National Standards Institute (ANSI), in conjunction with the American Society of Mechanical Engineers (ASME), provides safety standards for conveyor design.
Every year, OSHA and ASME review and update these requirements to incorporate new technology and advancements.
General requirements.
A motor stoppage switch must be located at the operator position. The system should have a warning light with sound that activates when the system is turned on.
Remote operations must have a stoppage switch at the motor.
Emergency stop switches prevent reactivation of the system until the emergency switch is reset to "ON".
Protective coverings and safeguards are required for screw conveyors.
Overhead conveyors must be equipped with protective coverings underneath, even if the conveyor is positioned away from employees.
Warning signs should be posted at crossovers, aisles, and passageways.
Conveyors should be locked out or have warning signs posted during routine maintenance.
Conveyors must be built and maintained in accordance with the ANSI B20.1- Safety Code for Conveyors, Cableways, and Related Equipment.
Safety standards for conveyors are outlined in ASME B11.0-, which addresses the safe use of machinery and specifies various safety devices to be included in the installation and construction process.
ASME B20.1- provides guidelines for the design, construction, maintenance, and operation of conveying systems with a focus on safety and hazard prevention. It is intended for industrial conveyors and does not apply to those designed for transporting people.
ASME B20.1- is part of a set of specifications that also includes ASME B20.1, ANSI B11.19, ANSI A.1, and ANSI 244.1. These standards cover safety guidelines for conveyors and walking surfaces.
ASME B20.1- outlines requirements for the construction, installation, maintenance, inspection, and operation of conveying systems.
These provide additional details on safety procedures for permanent, temporary, and portable conveyors.
Contact us to discuss your requirements of vertical bellow cover. Our experienced sales team can help you identify the options that best suit your needs.