What is water treatment rectifier used for?
For more information, please visit our website.
Water treatment rectifier are suitable for water treatment electrolysis, water extraction of metals, sewage treatment, seawater treatment, sodium hypochlorite electrolysis, electric descaling and other fields;
Water treatment rectifier structural design:
The water treatment power supply is mainly composed of a rectifier and filter circuit, a full-bridge conversion circuit, a high-frequency transformer, a high-frequency switching power supply and filter circuit, an auxiliary power supply circuit and a main control unit circuit. The main control unit circuit is mainly composed of a phase loss protection circuit and a temperature protection circuit. Overload protection circuit, short circuit protection circuit and PWM circuit with PI adjustment.
The 3 phase grid voltage is rectified and filtered after the power switch is switched, and the obtained smooth DC voltage of 520VDC is supplied to the inverter circuit. The inverter circuit is mainly composed of high-power field-effect MOSFET modules (or IGBT modules) to form a full-bridge conversion circuit. When the PWM output control signal drives the power module through the isolation driver, the two sets of diagonal tubes are turned on alternately, and a high-frequency pulse voltage is generated at the primary of the high-frequency transformer. The secondary voltage is transformed by the high-frequency transformer and rectified to provide energy to the load.
Features of switching power supply for water cooling:
1. The power supply can work in the state of current regulation or voltage regulation, and the two states can be switched arbitrarily;
2. 2. The accuracy of DC output voltage regulation is 50-100%, 50-100% output, input When the voltage 10% fluctuates or the load changes, the output voltage remains unchanged and the accuracy of voltage regulation is less than 0.5%;
3. It has a filtering function to prevent the power supply from starting to interfere with the instrument and the pollution of the power grid, which can avoid the current "surge" phenomenon;
4. Phase loss protection: When the three-phase AC input line of the power supply is missing, the power supply is automatically blocked. When the fault is eliminated, the power supply can automatically resume work;
5. Over current protection: When the current exceeds the rated value, the power supply is automatically in over current shutdown Alarm status;
6. Short-circuit protection: when the power supply is short-circuited or the internal components of the power supply are short-circuited, the air switch acts to automatically cut off the power supply;
7. Over-temperature protection: if the power supply is abnormal, the base temperature of semiconductor devices such as IGBT and Schottky is 28 (At TC, the electronic switch in the main control board acts, and the power supply is blocked, which can effectively protect the power supply;
8. Using a powerful axial fan, air volume Q22.3m3/min, speed W22400y/min; The control part is isolated, so acid mist and moisture will not erode the electronic devices, making the power supply safe and reliable;
9. The cooling air duct is strictly isolated from the electrical control part, so the acid mist and moisture will not erode the electronic devices, making the power supply safe,Fully reliable
10. The cable entry method is optional, with a cable entry terminal block;
11. The man-machine interface is touch-key control and digital tube display, with RS-485 communication Communication interface, using Modbus protocol, easy to communicate with remote PLC or industry PC networking;
12. Can set and display parameters such as voltage, current and time on the interface, The display accuracy is 0.1%.
Product features
Synchronous electronic commutation high-frequency switching power supply for our company's third generation of new energy-saving output commutation high-frequency switching power supply, this product introduces foreign advanced new rectifier conversion technology and new rectifier devices, through years of research and development and production of continuous improvement.
●It adopts the whole structure integrated with synchronous rectification technology + MOS tube commutation, and has the core technologies of synchronous rectification and electronic commutation. The product has the advantage if stable quality, reliability, efficiency and energy-saving.。
●The core device of the commutation part adopts high-power MOS tube electronic automatic commutation, the overall structure is more advanced, there is no failure caused by poor mechanical contact and cooling, the performance is better, and the loss is smaller.
●The synchronous rectification electronic commutation device has a built-in power cabinet, which is as large as the ordinary non-commutation power supply, and there is no commutation mechanical noise.
For more information, please visit Kehong.
●Touch screen control can be added according to customer requirements, and automatic control can be implemented with user production.
●Complete functions: with cycle automatic commutation, forward direction, reverse three working states, forward and reverse working time can be adjusted.
●Complete protection functions: it has protection functions such as under-voltage, over-voltage, phase loss, overcurrent, overheating and short circuit.
●RS-485 or standard 4-20 mA, 0-5 V and 0-10 V control signals can be added.
Main Purpose
It is suitable for hard chromium electroplating, deplating, environmental protection sewage (waste) water treatment, electrochemical treatment, electrolysis, industrial waste residue electrolysis and other industries that requires direct current high current commutation.
Technical Parameters
Input voltage: Three-phase AC 380 V ± 15%, 50 ~ 60 Hz
Output voltage: 0 ~ ±200 V optional
Output current: 0 ~ 30000 A optional
Stabilized voltage / current precision: ≤1%
Rated efficiency: ≥90%
Power factor: ≥0.98
Ripple factor: 1%∽3%
Service environment: -10∽45℃
Storage environment: -20∽50℃
Cooling mode: Forced cooling
Operation condition: Run at full load for 24 hours.
Form factor
Specifications and models L mm W mm Hmm ZY-TDH 2000A-12V 540 510 610 ZY-TDH 3000A-12V 630 515 900 ZY-TDH 5000A-12V 675 540 1150 ZY-TDH 6000A-12V 730 675 1150 ZY-TDH 8000A-12V 820 860 1370 ZY-TDH 10000A-12V 820 860 1850Note: The specifications, models and dimensions of power supply can be customized as per customers’ requirements. Please consult our engineers for detailed technical information.
Dimensional drawing
If you are looking for more details, kindly visit 10000A High frequency switching rectifier.