Different types of saw blades are used to help you cut stone

Diamond blades are designed to cut hard, abrasive materials. Diamonds are the hardest material on earth, which is needed when cutting other hard materials. Instead of rectangular teeth, these blades have diamond crystals embedded throughout the tip. Because of the way the diamond is embedded in the saw blade, diamond saw blades are strong enough to cut stone concrete, asphalt, brick and glass.

 

Diamond blades are designed to cut hard, abrasive materials. Diamonds are the hardest material on earth, which is needed when cutting other hard materials. Instead of rectangular teeth, these blades have diamond crystals embedded throughout the tip. Because of the way the diamond is embedded in the saw blade, diamond saw blades are strong enough to cut stone concrete, asphalt, brick and glass.

 

 

Choosing different types of saw blades to cut stone

 

The three types of diamond saw blades best suited for cutting stone with multiple saws are segmented blades, continuous edge blades and turbo blades.

 

Segmented Blades

 

Segmented diamond saw blades are usually designed with a medium-hard combination and are well suited for many cutting applications. They are useful for both wet and dry cutting and are sure to last a long time. These durable blades cut at medium smoothness and high speeds. , asphalt, brick, block and other construction materials.

 

Continuous Rim Blades

 

These blades are designed to handle hard materials. Continuous rim blades have a softer bond and the diamonds are exposed more quickly during the life of the blade, resulting in ultra-sharp cuts. They cut materials that break easily, such as tile, porcelain, granite, stone, glass, etc. These blades feature a section that does not break and are primarily used for wet cutting.

 

Turbine blades

 

Turbine blades are used for a wide range of general and specific applications. They are made of soft to medium bond and usually have a serrated edge on a single continuous section. Turbine blades have the best characteristics of the other two types of blades. The continuous serrated edges allow for fast cutting while remaining smooth and clean. They are primarily used to cut a variety of materials such as tile, stone, marble, granite, masonry and many other building materials. Many turbine blades are suitable for both wet and dry cutting applications.

If you want to learn more, please visit our website stone polishing tools manufacturer, diamond cutting tools factory, stone polishing tools manufacturers.