A concrete form tie is a special product that is used in formwork to hold concrete wall forms tightly against the lateral pressure of freshly poured concrete. They help to keep the equal spacing between the forms, resulting in the uniform wall thickness.
Trico Product Page
Concrete form ties contain two parts, which are the internal tension member and the external holding device. The method used to remove the form ties once the concrete has completely hardened will depend on the type of concrete form ties used for the job.
Ellis Formwork Manufacturing manufactures a wide variety of concrete form ties for all of our forming systems. Regardless of whether you need ties with water seals or cones, or if you just need a standard snap tie, we have got you covered. For multifaceted, problematic, or unusual builds, we will custom manufacture concrete special ties to meet the needs of your specific job.
Some of the products that we have available include:
If you are interested in finding the right concrete form ties for your next job, do not hesitate to give us a call. Contact Ellis Formwork Manufacturing and a member of our team will be happy to assist you and answer any questions that you may have.
What are the main parts of the Symons Formwork?
As a pre-engineered concrete forming system, Symons Forms have been used in some of the most iconic buildings around the world. These systems are factory built with impressive reusability, making it an ideal choice for the construction of a variety of structures.
As a complete solution for all your projects, the Symons Forming system can be used to quickly build concrete walls, haunches, stoops, and even pedestals. Available in a wide range of sizes, it can be combined to form a number of structures in any dimensions.
Wedge Bolts
Wedge bolts connect panels and ties together, eliminating the need for special tools or equipment in the set up process. Two identical wedge bolts work as a single lock-bolt set, connecting and clamping together. However, additional bolts may be needed for walker attachments, scaffold brackets, etc.
Long Bolts
imilar to a wedge bolt, these long bolts connect the 1, 1 ½, and 2-inch steel fillers, and are punched with two ¼ inch holes to make room for 16, or 20, D nails.
Short Bolts
Are you interested in learning more about symons form ties? Contact us today to secure an expert consultation!
Short Bolts are used to attach the pilaster form to a steel ply form. They eliminate the need for short stop wedge bolts and, upon proper installation, make stripping much easier.
X Flat Ties
X Flat Ties are used with Wedge Bolts to secure and space modular forms. X Flat ties are available in 6' up to 84' in 1/2' increments. Standard breakback is 1/4'.
One Piece Waler Clamps
One Piece Waler Clamps attach through the wedge bolt slot of modular type forms to provide wedge action aligning with single or double lumber.
Turnbuckles
The Turnbuckle is attached with nails or screws to lumber. The end of the turnbuckle contains a slot to accommodate a steel nail stake. It is used for Steel Ply Forming System supporting. Related accessories include x flat tie, wedge bolt and Clamp.
Z Tie Holders
Z Tie Holders are used in conjunction with Waler Ties to secure double 2x lumber wales to modular type forms.' The Waler Tie is available in two sizes to accommodate 2 x 4 and 2 x 6 lumber.
Trico offers the full set of the Symon Formwork accessories with high quality and competitive price. Please contact us for more details.
The company is the world’s best concrete anchors eye bolts supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.